smdion Posted February 23, 2015 Author Share Posted February 23, 2015 Hey Everyone... I'm back.. just moved into a new job and new location. Sorry for my AFK. Thanks to everyone who was supporting in my absence. Link to comment
onthecake Posted February 25, 2015 Share Posted February 25, 2015 Any idea how to get pyOpenSSL module into docker? Headphones SSL wont work without it. I may be way off so if I am please let me know. Thanks Link to comment
darkside40 Posted February 26, 2015 Share Posted February 26, 2015 Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Link to comment
CHBMB Posted February 26, 2015 Share Posted February 26, 2015 Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Down for me too, so I assume it's an issue smdion's end. I know the poor chap has just moved house and job so might have to give him a while, I've had a pretty good study of his website in the recent past, so might be able to help in his absence. Link to comment
trurl Posted February 26, 2015 Share Posted February 26, 2015 Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Down for me too, so I assume it's an issue smdion's end. I know the poor chap has just moved house and job so might have to give him a while, I've had a pretty good study of his website in the recent past, so might be able to help in his absence. If you mean http://www.seandion.info/ it is working for me. Link to comment
CHBMB Posted February 26, 2015 Share Posted February 26, 2015 Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Down for me too, so I assume it's an issue smdion's end. I know the poor chap has just moved house and job so might have to give him a while, I've had a pretty good study of his website in the recent past, so might be able to help in his absence. Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Down for me too, so I assume it's an issue smdion's end. I know the poor chap has just moved house and job so might have to give him a while, I've had a pretty good study of his website in the recent past, so might be able to help in his absence. If you mean http://www.seandion.info/ it is working for me. Still down for me. But I am on my phone. Get a DNS error. I can however load up a cached version. Link to comment
wickedathletes Posted February 26, 2015 Share Posted February 26, 2015 smdion, Regarding your beta PlexReport, any luck as to what would cause the GITHUB to not pick up the latest? Your docker is pointing to the right source and I have deleted the container/image for PlexReport but it keeps getting the wrong version (without PlexHome), or possibly the wrong version, but I don't know how to tell what version it got other than looking at your link in the docker script. Link to comment
sparklyballs Posted February 26, 2015 Share Posted February 26, 2015 smdion, Regarding your beta PlexReport, any luck as to what would cause the GITHUB to not pick up the latest? Your docker is pointing to the right source and I have deleted the container/image for PlexReport but it keeps getting the wrong version (without PlexHome), or possibly the wrong version, but I don't know how to tell what version it got other than looking at your link in the docker script. exec into the container and try this in the folder that the git pull is made into. git log see if the commit is the same as on the git page. Link to comment
CHBMB Posted February 26, 2015 Share Posted February 26, 2015 Hi smdion, could it be that your Website is down? Just wanted to have a look at it. Working OK now on my home internet. Link to comment
darkside40 Posted February 27, 2015 Share Posted February 27, 2015 Yep works. Thanks! Link to comment
wickedathletes Posted February 27, 2015 Share Posted February 27, 2015 smdion, Regarding your beta PlexReport, any luck as to what would cause the GITHUB to not pick up the latest? Your docker is pointing to the right source and I have deleted the container/image for PlexReport but it keeps getting the wrong version (without PlexHome), or possibly the wrong version, but I don't know how to tell what version it got other than looking at your link in the docker script. exec into the container and try this in the folder that the git pull is made into. git log see if the commit is the same as on the git page. Pardon my complete lack of docker knowledge on this one, but I am not really sure how to... My vast knowledge led me to something like this but that ddin't do anything for me haha docker exec -i plexReport /bin/bash this gets me in (I assume) but then running git log returns: fatal: Not a git repository (or any of the parent directories): .git Link to comment
sparklyballs Posted February 27, 2015 Share Posted February 27, 2015 smdion, Regarding your beta PlexReport, any luck as to what would cause the GITHUB to not pick up the latest? Your docker is pointing to the right source and I have deleted the container/image for PlexReport but it keeps getting the wrong version (without PlexHome), or possibly the wrong version, but I don't know how to tell what version it got other than looking at your link in the docker script. exec into the container and try this in the folder that the git pull is made into. git log see if the commit is the same as on the git page. Pardon my complete lack of docker knowledge on this one, but I am not really sure how to... My vast knowledge led me to something like this but that ddin't do anything for me haha docker exec -i plexReport /bin/bash this gets me in (I assume) but then running git log returns: fatal: Not a git repository (or any of the parent directories): .git docker exec -i plexReport /bin/bash find / -type d -name ".git" -ls hopefully it should find only folder cd to the folder containing the .git , ie if it says ./opt/plexreport/.git cd to /opt/plexreport (if it finds more, cd to the one with plex or partof in the name) then run git log I can't remember whether that lists old or new commits first, but it does show the date so it shouldn't be too hard to work out. then compare that with the git commits on the git page for plexreport. Link to comment
wickedathletes Posted February 27, 2015 Share Posted February 27, 2015 docker exec -i plexReport /bin/bash find / -type d -name ".git" -ls hopefully it should find only folder cd to the folder containing the .git , ie if it says ./opt/plexreport/.git cd to /opt/plexreport (if it finds more, cd to the one with plex or partof in the name) then run git log I can't remember whether that lists old or new commits first, but it does show the date so it shouldn't be too hard to work out. then compare that with the git commits on the git page for plexreport. Thanks sparklyballs... Hmm, looks like its missing a bunch of stuff, last commit was 1/8/2015 and the bug that needed to be fixed was the 1/29, plus there have been a bunch since then. commit cd7bae0ea1a76f66adc42cb8debbd3e66ee36449 Author: bstascavage <[email protected]> Date: Thu Jan 8 13:50:48 2015 -0500 Fixed bug where incomplete seasons had every episdoe listed I guess I don't understand github enough The dockerfile code is pulling from the master, https://github.com/bstascavage/plexReport.git and when you go there its shows all the latest commits. Link to comment
dalben Posted March 1, 2015 Share Posted March 1, 2015 hey smdion, your headphones container isn't having much lucking in the auto-update notification department. Here's a screenshot. I've deleted and reinstalled with no change. Link to comment
CHBMB Posted March 1, 2015 Share Posted March 1, 2015 hey smdion, your headphones container isn't having much lucking in the auto-update notification department. Here's a screenshot. I've deleted and reinstalled with no change. Working for me mate. Although only installed it today but checked for updates and it looks like it's working Link to comment
dalben Posted March 9, 2015 Share Posted March 9, 2015 hmmm, odd. I trashed everything and started again when I upgraded to 6.14b and I still have the issue. Must be something at my end... Link to comment
dalben Posted March 10, 2015 Share Posted March 10, 2015 OK, scrapped everything for headphones, including my xml templatre and restarted. Seems to work fine now Link to comment
wickedathletes Posted March 10, 2015 Share Posted March 10, 2015 Anyone have any thoughts as to why the PlexReport docker wouldn't be pulling the latest git pull on a clean install? I am completely lost since if I run the command by itself it does, so not sure how to fix the dockerfile. Link to comment
sparklyballs Posted March 10, 2015 Share Posted March 10, 2015 it may well be a clean install from your point of view but the docker image itself is a fixed point in time. I forked smdions repo and looked at this one, when the image was built on docker hub whatever was latest git at that time will always be in that image. since smdion seems to be taking a sabbatical there are only two ways now to get a later image, someone to take ownership of his entire repo and for them to run an update build , or someone to take this particular image, put it in their repo, run an updated build and tell people to change to their repo. Link to comment
cappiel Posted March 15, 2015 Share Posted March 15, 2015 can anyone access the documentation for setting up the reverseproxy docker? http://seandion.info/unraid/ seems to be down for the last few days. thanks Link to comment
snidera Posted March 16, 2015 Share Posted March 16, 2015 Having trouble with the Headphones docker. I've re-loaded (deleted the container & the image) a couple times but it's doing the same thing. I get 1 or 2 artists, if any (the same 1 gets loaded first). I get plenty of 503 timeouts from musicbrainz, but I've left it all weekend & it doesn't load any more (even if I force a rescan). I've found that once I get the error below in the log, it doesn't go any farther. Sometimes it hits before any artists are loaded, max I've got is 2. Error: ERROR Uncaught exception: Traceback (most recent call last): File "/opt/headphones/headphones/logger.py", line 210, in new_run old_run(*args, **kwargs) File "/usr/lib/python2.7/threading.py", line 763, in run self.__target(*self.__args, **self.__kwargs) File "/opt/headphones/headphones/librarysync.py", line 333, in libraryScan importer.artistlist_to_mbids(artist_list) File "/opt/headphones/headphones/importer.py", line 63, in artistlist_to_mbids results = mb.findArtist(artist, limit=1) File "/opt/headphones/headphones/mb.py", line 98, in findArtist mb_lock.snooze(5) File "/opt/headphones/headphones/lock.py", line 70, in snooze self.queue.add(seconds) AttributeError: Queue instance has no attribute 'add' I also see the message "You're running an unknown version of headphones, click to Update or Close". Update tries to update, but nothing happens. Oh yeah - beta14b, this is on a test server, I'm planning to switch to Unraid. Have Plex docker running great. Just seeing what else I can do with it. I have a win7 running headphones just fine, so I don't think it's a setup problem. Anybody have a suggestion? Link to comment
sparklyballs Posted March 16, 2015 Share Posted March 16, 2015 Having trouble with the Headphones docker. I've re-loaded (deleted the container & the image) a couple times but it's doing the same thing. I get 1 or 2 artists, if any (the same 1 gets loaded first). I get plenty of 503 timeouts from musicbrainz, but I've left it all weekend & it doesn't load any more. I've found that once I get the error below in the log, it doesn't go any farther. Sometimes it hits before any artists are loaded, max I've got is 2. Error: ERROR Uncaught exception: Traceback (most recent call last): File "/opt/headphones/headphones/logger.py", line 210, in new_run old_run(*args, **kwargs) File "/usr/lib/python2.7/threading.py", line 763, in run self.__target(*self.__args, **self.__kwargs) File "/opt/headphones/headphones/librarysync.py", line 333, in libraryScan importer.artistlist_to_mbids(artist_list) File "/opt/headphones/headphones/importer.py", line 63, in artistlist_to_mbids results = mb.findArtist(artist, limit=1) File "/opt/headphones/headphones/mb.py", line 98, in findArtist mb_lock.snooze(5) File "/opt/headphones/headphones/lock.py", line 70, in snooze self.queue.add(seconds) AttributeError: Queue instance has no attribute 'add' I also see the message "You're running an unknown version of headphones, click to Update or Close". Update tries to update, but nothing happens. first thing is musicbrainz server being overloaded second thing is not having the edge variable set to 1 in the docker template so git is unavailable, you can either ignore it or set edge to 1, but if there's a git update that breaks the container.......... Link to comment
snidera Posted March 18, 2015 Share Posted March 18, 2015 Thanks Sparkly, I thought it might be related to the version, but since it was stopping on the error, I wasn't sure. If it would continue to get info from musicbrainz I wouldn't mind, but I've left it for 2+ days in multiple instances & it only gets 2 artists loaded. How do I set EDGE=1 in the template? I tried running the command from the github page via SSH docker run -d --net="host" --name="headphones" -v /path/to/headphones/data:/config -v /path/to/downloads:/download s -v /path/to/music:/music -v /etc/localtime:/etc/localtime:ro -e EDGE=1 -p 8181:8181 sacretagent/needo-headphones but it's getting stuck at the --net="host" part (also adjusted the command for my volume mapping) "flag provided but not defined: -–net" This is only the 3rd docker i've set up, but Plex & Transmission haven't been an issue. (well, I haven't done anything with Transmission, but it doesn't give me errors, yet). Link to comment
smdion Posted March 18, 2015 Author Share Posted March 18, 2015 can anyone access the documentation for setting up the reverseproxy docker? http://seandion.info/unraid/ seems to be down for the last few days. thanks Yea... sorry about that. Restoring data now. Note to self. Don't delete wrong SQL database when hosting WordPress. Link to comment
generalz Posted March 19, 2015 Share Posted March 19, 2015 has anyone added ffmpeg or lame to the headphones? Link to comment
Recommended Posts