August 18, 201411 yr Just thought I'd see if anyone else has tried this. It's similar to sharing in dockers. In my xml file under devices I put a line like this <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt'/> <target dir='shares'/> </filesystem> and then within the vm in fstab shares /mnt 9p trans=virtio,version=9p2000.L,noauto,nobootwait,rw 0 0 I noauto because sometimes it errors out at vm startup. So I just put "mount /mnt" in /etc/rc.local I run this in an apps vm and I had to modify rc.local to start before the apps so unraid user shares are mounted before any apps. Been working well for a couple weeks with everything located in /mnt on unraid available in my apps vm under the same /mnt. No network problems, rocket rides or cifs mounting needed like in xen.
August 18, 201411 yr Yes , I am using it for a long time! And this is very cool way to pass trough file system :-) and for me KVM is the preferred and is stable.
August 18, 201411 yr Author Yes , I am using it for a long time! And this is very cool way to pass trough file system :-) and for me KVM is the preferred and is stable. Why didn't you tell us? For me kvm hasn't been as stable. I think it has to do with my motherboard/cpu. In Xen it was very stable as long as I didn't pin cores in sysconfig and xenvm.cfg. If I did it would eventually freeze the system. I've had kvm freeze in a similar way. Nothing in the console just frozen. Had to hard reboot. So far I've been up for several days no cachedirs and 2 vms with 2 cores and 2 GB.
August 18, 201411 yr Yes , I am using it for a long time! And this is very cool way to pass trough file system :-) and for me KVM is the preferred and is stable. Why didn't you tell us? For me kvm hasn't been as stable. I think it has to do with my motherboard/cpu. In Xen it was very stable as long as I didn't pin cores in sysconfig and xenvm.cfg. If I did it would eventually freeze the system. I've had kvm freeze in a similar way. Nothing in the console just frozen. Had to hard reboot. So far I've been up for several days no cachedirs and 2 vms with 2 cores and 2 GB. Some info earlier about p9 file system... I'm using this appliance for my VM:s http://lime-technology.com/forum/index.php?topic=31623.msg311001#msg311001
August 18, 201411 yr Author Yes , I am using it for a long time! And this is very cool way to pass trough file system :-) and for me KVM is the preferred and is stable. Why didn't you tell us? For me kvm hasn't been as stable. I think it has to do with my motherboard/cpu. In Xen it was very stable as long as I didn't pin cores in sysconfig and xenvm.cfg. If I did it would eventually freeze the system. I've had kvm freeze in a similar way. Nothing in the console just frozen. Had to hard reboot. So far I've been up for several days no cachedirs and 2 vms with 2 cores and 2 GB. Some info earlier about p9 file system... I'm using this appliance for my VM:s http://lime-technology.com/forum/index.php?topic=31623.msg311001#msg311001 I see you tried to tell me 2 months ago but I wasn't listening since I never liked arch I never read that thread.
August 18, 201411 yr So instead of adding the following to the VM and editing fstab as shown below. You are sharing files directly from the .xml? Is there an advantage to doing it one way vs the other? Edit fstab so we can connect the mounts on boot sudo nano /etc/fstab Edit and paste the following //Tower/Movies /media/Movies cifs noauto,credentials=/home/ubuntuUser/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 //Tower/TV /media/TV cifs noauto,credentials=/home/ubuntuUser/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0
August 18, 201411 yr Speed and I think it's more benefit than SMB With editing fstab (like I did above) a few of my apps (sickbeard) loaded before the shares were mounted. To fix this I created a crontab task that delayed the startup of sickbeard for 10 seconds after boot. Does the 9P sharing mount the shares before the apps are loaded in rc.local?
August 18, 201411 yr In arch I have a few apps using 9p and no issue when booting. But I changed the fstab comparing my post in the other thread, I can check this later for exact command I have
August 18, 201411 yr In arch you can also set to load apps after network is up, but I don't think bin hex have added this in his VM
August 18, 201411 yr Author Speed and I think it's more benefit than SMB With editing fstab (like I did above) a few of my apps (sickbeard) loaded before the shares were mounted. To fix this I created a crontab task that delayed the startup of sickbeard for 10 seconds after boot. Does the 9P sharing mount the shares before the apps are loaded in rc.local? The advantage is not using your virtual network especially for intensive operations like, par, rar, usnet and torrents. I had a problem with sickrage and nzbget. I renamed the init symlinks in /etc/rc2.d of my apps from 20 to 99 so they start last. Then changed rc.local from 99 to 98. Check this page it explains the different rc.x runlevels. You'll have to check which level your vm runs or just change them all, rc0.d, rc1.d...rc6.d http://www.linux.com/news/enterprise/systems-management/8116-an-introduction-to-services-runlevels-and-rcd-scripts By doing this you could also make it so one app starts before the other.
August 18, 201411 yr My current /etc/fstab is as follows: //pithos.private/media/MOVIES\040-\040HD /home/archedraft/media/movies cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 //pithos.private/media/TV\040SERIES /home/archedraft/media/tv cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 //pithos.private/downloads /home/archedraft/media/downloads cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 1. I am assuming if I wanted to add this to my .xml it should read like this below? <filesystem type='mount' accessmode='passthrough'> <source dir='/media/MOVIES\040-\040HD'/> <target dir='/home/archedraft/media/movies'/> </filesystem> 2. /etc/fstab should read is as follows: shares /media/MOVIES\040-\040HD 9p trans=virtio,version=9p2000.L,noauto,nobootwait,rw 0 0 3. Do I need to make 3 separate filesystem codes in my .xml for each share or can you add multiple shares to one filesystem code? <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt'/> <target dir='shares'/> </filesystem> 4. I am assuming I do not need to install a 9P program in my ubuntu server? 5. Due to the shares being passthrough, I should not have to have a .smbcredentials file correct?
August 18, 201411 yr My current /etc/fstab is as follows: //pithos.private/media/MOVIES\040-\040HD /home/archedraft/media/movies cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 //pithos.private/media/TV\040SERIES /home/archedraft/media/tv cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 //pithos.private/downloads /home/archedraft/media/downloads cifs noauto,credentials=/home/archedraft/.smbcredentials,noperm,noserverino,uid=nobody,gid=users 0 0 1. I am assuming if I wanted to add this to my .xml it should read like this below? <filesystem type='mount' accessmode='passthrough'> <source dir='/media/MOVIES\040-\040HD'/> <target dir='/home/archedraft/media/movies'/> </filesystem> 2. /etc/fstab should read is as follows: shares /media/MOVIES\040-\040HD 9p trans=virtio,version=9p2000.L,noauto,nobootwait,rw 0 0 3. Do I need to make 3 separate filesystem codes in my .xml for each share or can you add multiple shares to one filesystem code? <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt'/> <target dir='shares'/> </filesystem> 4. I am assuming I do not need to install a 9P program in my ubuntu server? 5. Due to the shares being passthrough, I should not have to have a .smbcredentials file correct? For target dir, that's the share name you add first in the fstab, give it name like cache,user......source dir is the file system you like to pass trough. And you give one for each pass trough , like you have above. To get this to work, the VM kernel needs this 9p modules, Ubuntu I think is OK. Number 1 and 2 I think is wrong, look here... http://lime-technology.com/forum/index.php?topic=31623.msg311001#msg311001
August 18, 201411 yr Example..... Below folders are created in my VM /mnt/cache /mnt/user My VM fstab cache /mnt/cache 9p trans=virtio,version=9p2000.L,rw 0 0 user /mnt/user 9p trans=virtio,version=9p2000.L,rw 0 0 Part of My XML file <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/cache/'/> <target dir='cache'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/'/> <target dir='user'/> </filesystem>
August 18, 201411 yr OK, understood. I'll give this a try this afternoon. Thanks for the example! I am guessing that your "cache" and "user" mounts are the main shares you have setup in unRAID? So for my setup my "cache" share would be "media".
August 18, 201411 yr Yes, like this <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/media/'/> <target dir='anynameyouliketouse'/> </filesystem> in VM mkdir /mnt/folderyouhavecreated fstab anynameyouliketouse /mnt/folderyouhavecreated 9p trans=virtio,version=9p2000.L,rw 0 0 :-) //Peter
August 18, 201411 yr I got the following error when I tried. qemu-system-x86_64: -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=media,bus=pci.2,addr=0x1: Device initialization failed. qemu-system-x86_64: -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=media,bus=pci.2,addr=0x1: Device 'virtio-9p-pci' could not be initialized That is what I added to my .xml file <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/media'/> <target dir='media'/> </filesystem> Do I need to add the following to syslinux.cfg before passthrough will work? label KVM unRAID OS menu default kernel /bzimage append intel_iommu=on quiet vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot acpi_sleep=s3_bios
August 18, 201411 yr Author Does /mnt/media exist on unraid? The source dir has to be an existing path in unraid. I didn't add anything to syslinux.
August 18, 201411 yr Author Something that may be of interest too. Because I moved from xen vm to dockers to kvm vm I just left my paths from docker intact in each app. Then in the vm I mount /mnt from unraid to /mnt in vm. Then I symlinked say /mnt/user/movies to a symlink /movies same with/mnt/cache/downloads to /downloads etc. I put all my configs in /opt/appdata and created a symlink /configs
August 18, 201411 yr So here is a quick write up for anyone who needs a little more guidance (like myself ): 1. First edit your .xml file (source dir = unraid mount) (traget dir = label) <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/MEDIA/MOVIES - HD'/> <target dir='movies'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/MEDIA/TV SERIES'/> <target dir='tv'/> </filesystem> <filesystem type='mount' accessmode='passthrough'> <source dir='/mnt/user/downloads'/> <target dir='downloads'/> </filesystem> 2. Then startup the VM 3. edit fstab sudo nano /etc/fstab movies /home/archedraft/media/movies 9p trans=virtio,version=9p2000.L,_netdev,rw 0 0 tv /home/archedraft/media/tv 9p trans=virtio,version=9p2000.L,_netdev,rw 0 0 downloads /home/archedraft/media/downloads 9p trans=virtio,version=9p2000.L,_netdev,rw 0 0 4. Create the mount directories in your VM Sudo mkdir /home/archedraft/media/movies 5. edit nano [EDIT: You don't need to do this step unless you use this in fstab "trans=virtio,version=9p2000.L,noauto,nobootwait,rw"] sudo nano /etc/rc.local mount /home/archedraft/media/movies mount /home/archedraft/media/tv mount /home/archedraft/media/downloads 6. reboot
August 19, 201411 yr Hi archedraft, Any reason to use the /etc/rc.local ? If you skip that, and do mount -a after you have edit the fstab and created the mount directories in your VM, what do you see? are the share mounted ? thats the way I used it. no extra mount command in other files. //Peter
August 19, 201411 yr He uses the noauto option in fstab and needs to mount it manually after boot. He did mention something about why in an earlier post I think.
August 19, 201411 yr Author With auto mount it will error during vm boot sometimes. Sometimes it would get stuck during boot saying press m or s or something like that. But when you manually mount with rc.local it always works.
August 19, 201411 yr Just wondering if that was a problem with cifs shares you had or on the passthrough you have now also?
Archived
This topic is now archived and is closed to further replies.