Benjo-kazooie Posted September 22, 2014 Share Posted September 22, 2014 hello there. im new to this forum, and to the unraid server. i have got one that works but comes up with alot of errors on the :8080 page. its usually machine error check events logged. but after turning the system on today i came up with Sep 22 18:34:02 Tower kernel: usb 3-1: USB disconnect, device number 3 (Drive related) Sep 22 18:34:38 Tower kernel: irq 16: nobody cared (try booting with the "irqpoll" option) (Errors) Sep 22 18:34:38 Tower kernel: Pid: 0, comm: swapper/0 Tainted: G O 3.9.6p-unRAID #23 (Errors) Sep 22 18:34:38 Tower kernel: Call Trace: (Errors) Sep 22 18:34:38 Tower kernel: [<c105f89e>] __report_bad_irq+0x29/0xb4 (Errors) Sep 22 18:34:38 Tower kernel: [<c105fa60>] note_interrupt+0x137/0x1ac (Errors) Sep 22 18:34:38 Tower kernel: [<c135d6e1>] ? cpuidle_wrap_enter+0x2f/0x82 (Errors) Sep 22 18:34:38 Tower kernel: [<c105dfd0>] handle_irq_event_percpu+0x109/0x11a (Errors) Sep 22 18:34:38 Tower kernel: [<c105ff24>] ? handle_percpu_irq+0x3b/0x3b (Errors) Sep 22 18:34:38 Tower kernel: [<c105e006>] handle_irq_event+0x25/0x3c (Errors) Sep 22 18:34:38 Tower kernel: [<c105ff24>] ? handle_percpu_irq+0x3b/0x3b (Errors) Sep 22 18:34:38 Tower kernel: [<c105ff91>] handle_fasteoi_irq+0x6d/0xab (Errors) Sep 22 18:34:38 Tower kernel: <IRQ> [<c100362e>] ? do_IRQ+0x37/0x9b Sep 22 18:34:38 Tower kernel: [<c1403d2c>] ? common_interrupt+0x2c/0x31 (Errors) Sep 22 18:34:38 Tower kernel: [<c135d6e1>] ? cpuidle_wrap_enter+0x2f/0x82 (Errors) Sep 22 18:34:38 Tower kernel: [<c135d746>] ? cpuidle_enter_tk+0x12/0x14 (Errors) Sep 22 18:34:38 Tower kernel: [<c135d1d1>] ? disable_cpuidle+0xf/0xf (Errors) Sep 22 18:34:38 Tower kernel: [<c135d1ef>] ? cpuidle_enter_state+0xc/0x38 (Errors) Sep 22 18:34:38 Tower kernel: [<c135d605>] ? cpuidle_idle_call+0x73/0x9b (Errors) Sep 22 18:34:38 Tower kernel: [<c1008802>] ? cpu_idle+0x46/0x6f (Errors) Sep 22 18:34:38 Tower kernel: [<c13f6b98>] ? rest_init+0x58/0x5a (Errors) Sep 22 18:34:38 Tower kernel: [<c1574a0d>] ? start_kernel+0x2ad/0x2b3 (Errors) Sep 22 18:34:38 Tower kernel: [<c15745db>] ? repair_env_string+0x53/0x53 (Errors) Sep 22 18:34:38 Tower kernel: [<c15742a3>] ? i386_start_kernel+0x79/0x7d (Errors) i dont even know where to start to look for issues. with this or the previously mentioned errors. i would greatly appreciate any help. it would be grand if i can get this system working smoothly. many thanks Quote Link to comment
WeeboTech Posted September 22, 2014 Share Posted September 22, 2014 Describe your system hardware and post a syslog. It will go a long way to providing more details for people. Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 ok. il try my best. the sys log im not too sure how to do that. but il try. the system intel haswell 3.3ghz processor. Gigabyte GA-Z97P-D3 motherboard 2x 4gb ddr3 Crucial ram. corsair obsidian 900D case. the PSU however is out of an old dell desktop. its about 350w, soon to be upgraded to a 500w fanless PSU 2x Seagate st4000 hdds. 1x WD 320 Hdd 1x samsung 250gb hdd hopefully i have done this correctly. thank you. syslog-2014-09-22.txt Quote Link to comment
archedraft Posted September 22, 2014 Share Posted September 22, 2014 Looks like you have plugin's installed? If so, have you tired booted into the "unRAID OS Safe Mode (no plugins)" mode when you boot up unRAID? Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 i have not. i will try that and report back. thanks for a quick reply Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 after a restart there seems to be a lack of the mass of errors, guess thats good. but it does show one of those '[Hardware Error]: Machine check events logged' errors. guess i need to get rid of loads of plugins and maby start new ones? Quote Link to comment
archedraft Posted September 22, 2014 Share Posted September 22, 2014 Well a good test to see if it is the plugins would be to remove all the plugins and then start unRAID normally. If you want to post a syslog after that we could take a look at it. Which version of unRAID are you running and which plugins? Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 ah ok, how would i go about getting rid of the plugns? if im honest. the only plug in i know of is plex, i know there are others. although i have no idea what they are. it was from when i had the old setup and it would not play things through plex properly. i know now that it was more to do with far inferior hardware components. Quote Link to comment
archedraft Posted September 22, 2014 Share Posted September 22, 2014 Well the plugins are usually found in the flash drive under: \flash\config\plugins \flash\extra Just copy them to your windows desktop then remove them from your unRAID flash drive and reboot unRAID. Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 ok il do that and add plex on and leave it at that. what about this '[Hardware Error]: Machine check events logged' error? is there any way i can find out what is causing this? oh and im running unraid 5.0 thank you for your replies Quote Link to comment
Benjo-kazooie Posted September 22, 2014 Author Share Posted September 22, 2014 i only had 2 things in those folders. plex in one and web gui latest in the other. pkg manager has had a few things on it but i dont know what was there as original and what wasnt. got rid of the web gui latest one and restarted. there has been no errors at all so far. i was wondering if it was from lack of power? unfortunately due to the size of the cast the power supply is kind of sat on the bottom of the case. its a dell own brand and doesnt actually fit in the pre cutouts. but more to the point its only 350w. if its not getting enough power to do anything could this be causing the '[Hardware Error]: Machine check events logged' errors? they concern me quite a bit. Quote Link to comment
archedraft Posted September 22, 2014 Share Posted September 22, 2014 could it be lack of power... maybe... although you do not have much hardware installed from what you posted above. I would upgrade to the latest version of unRAID 5.0.5 just to make sure it your version of unRAID is the issue. Quote Link to comment
Benjo-kazooie Posted October 1, 2014 Author Share Posted October 1, 2014 hi there. thank you for your reply. sorry its taken me so long to be active. i have since got a 500w fannless PSU and a 4tb hdd and they all work fine, however after upgrading from a bt home hub 3 to a home hub 5 i cannot use the /tower or /tower:8080 (server is indeed called tower but its in an obsidian 900d case so it is a tower) im having to use my ip address to log on. and thats a pain in the arse. ive tried going through the faqs and fix the problem but i cant seem to make any headway. im not hugely network savvi. and im struggling alot to actually understand some things. and how would i go about updating unraid? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.