Jump to content

Is my drive failing?


Recommended Posts

I woke up to a red dot today. I have noe idead how to read the smart report.

 

Is the drive still ok?

 

smartctl 6.2 2013-07-26 r3841 [i686-linux-3.9.11p-unRAID] (local build)

Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

 

=== START OF INFORMATION SECTION ===

Model Family:    Western Digital Caviar Green (AF, SATA 6Gb/s)

Device Model:    WDC WD20EARX-00PASB0

Serial Number:    WD-WMAZA9794911

LU WWN Device Id: 5 0014ee 25c509fd2

Firmware Version: 51.0AB51

User Capacity:    2,000,398,934,016 bytes [2.00 TB]

Sector Sizes:    512 bytes logical, 4096 bytes physical

Device is:        In smartctl database [for details use: -P show]

ATA Version is:  ATA8-ACS (minor revision not indicated)

SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)

Local Time is:    Thu Nov  6 09:00:25 2014 PST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status:  (0x82) Offline data collection activity

was completed without error.

Auto Offline Data Collection: Enabled.

Self-test execution status:      (  0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: (39960) seconds.

Offline data collection

capabilities: (0x7b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: (  2) minutes.

Extended self-test routine

recommended polling time: ( 385) minutes.

Conveyance self-test routine

recommended polling time: (  5) minutes.

SCT capabilities:       (0x3035) SCT Status supported.

SCT Feature Control supported.

SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate    0x002f  200  200  051    Pre-fail  Always      -      0

  3 Spin_Up_Time            0x0027  253  165  021    Pre-fail  Always      -      1950

  4 Start_Stop_Count        0x0032  097  097  000    Old_age  Always      -      3736

  5 Reallocated_Sector_Ct  0x0033  200  200  140    Pre-fail  Always      -      0

  7 Seek_Error_Rate        0x002e  200  200  000    Old_age  Always      -      0

  9 Power_On_Hours          0x0032  073  073  000    Old_age  Always      -      19993

10 Spin_Retry_Count        0x0032  100  100  000    Old_age  Always      -      0

11 Calibration_Retry_Count 0x0032  100  100  000    Old_age  Always      -      0

12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      405

192 Power-Off_Retract_Count 0x0032  200  200  000    Old_age  Always      -      366

193 Load_Cycle_Count        0x0032  088  088  000    Old_age  Always      -      338806

194 Temperature_Celsius    0x0022  125  108  000    Old_age  Always      -      25

196 Reallocated_Event_Count 0x0032  200  200  000    Old_age  Always      -      0

197 Current_Pending_Sector  0x0032  200  200  000    Old_age  Always      -      0

198 Offline_Uncorrectable  0x0030  200  200  000    Old_age  Offline      -      0

199 UDMA_CRC_Error_Count    0x0032  200  200  000    Old_age  Always      -      0

200 Multi_Zone_Error_Rate  0x0008  200  200  000    Old_age  Offline      -      0

 

SMART Error Log Version: 1

No Errors Logged

 

SMART Self-test log structure revision number 1

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Short offline      Completed without error      00%    12814        -

# 2  Short offline      Completed without error      00%        1        -

 

SMART Selective self-test log data structure revision number 1

SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...