54 minutes ago, superschlundi said:

After several days still no data and inconsistent representation of the graphs. 

 

What is your Unraid version?

7 hours ago, bonienl said:

 

What is your Unraid version?

6.11.5

8 hours ago, superschlundi said:

6.11.5

Same issue as well also on 6.11.5

 

This plugin was updated on 2/5/2023 but still doesn't seem to fix the s3_sleep issue:

Mine still shows 3.0.8 and I still had to manually change PB12 to PB13 for 6.11.5 to recognize the array disks properly.

 

# Version 3.0.8   Support for Unraid 6.9

#                 s/PB12/PB13/ for new .ini format

#

# Bergware International

####################################################################################

version=3.0.8

program=$(basename $0)

ini=/var/local/emhttp/disks.ini

 

# Get flash device

getFlash() {

  flash=($(grep -PB13 '^type="Flash' $ini|grep -Po '^device="\K[^"]+'))

}

 

# Get list of cache devices (if present)

getCache() {

  cache=($(grep -PB13 '^type="Cache' $ini|grep -Po '^device="\K[^"]+'))

}

 

# Get list of array devices

getArray() {

  array=($(grep -PB13 '^type="(Parity|Data)' $ini|grep -Po '^device="\K[^"]+'))

}

Having difficulty updating to Dynamix System Statistics 2023.02.05a

When clicking the UPDATE button nothing happens.

 

Under the tab Plugin File Install Errors one item is listed:

/boot/config/plugins-error/dynamix.ssd.trim.plg

It shows a status of ERROR.   When clicking the Remove button for that, nothing happens.

 

Have since rebooted the server, the above does not change.

There are no obvious errors in the log.

 

The graphical stats page continues to work

 

On Unraid 6.11.5.

 

 

-- Tom

 

Just saw the same here.  Except my log was being spammed every 1 minute.

 

Feb 11 20:14:01 Malta-Tower crond[1494]: exit status 127 from user root /usr/local/emhttp/plugins/dynamix.system.stats/scripts/sa1 1 1 &> /dev/null

 

I rebooted the server, but unfortunately no change.  Currently running 6.10.3

 

I've removed the plugin until there is some resolution.

Dynamix S3 sleep plugin - updated the script to correct the device detection

 

Dynamix System Stats plugin - re-added sysstat package for Unraid versions 6.9 and 6.10

 

version 2023.02.05 of the plugin and unraid 6.11.5 is putting the computer to sleep too soon. it has only happened since upgrading from like 6.10.x. i have it set to sleep if all arrray disks have been spun down after 15 minutes. here is the screenshot of my current settings 

if i disable the plugin, unraid works fine so im pretty sure its the plugin and even after the recent update, it still does it. i also attached a diag in case you are able to see anything more. i turn on unraid for movie nights or managing media files so its off more then its on. 

server-diagnostics-20230212-2228.zip

The S3 Sleep plugin was updated to version 2013.02.13, which has a fix for devices (disks) detection. Please upgrade and try again.

 

1 hour ago, bonienl said:

The S3 Sleep plugin was updated to version 2013.02.13, which has a fix for devices (disks) detection. Please upgrade and try again.

 

ill give it a try when i checked last night i didnt see an update thanks

10 hours ago, bonienl said:

Dynamix S3 sleep plugin - updated the script to correct the device detection

 

Dynamix System Stats plugin - re-added sysstat package for Unraid versions 6.9 and 6.10

 

System Stats still not displaying historical data after update, rebooted as well.

4 hours ago, emb531 said:

System Stats still not displaying historical data after update, rebooted as well.

 

It appears the sysstat package included with Unraid has an issue (only Unraid 6.12 has a working package).

 

I restored the original sysstat package for Unraid 6.9 to 6.11, please update.

No reboot is required, Stats should start working after the upgrade of the plugin.

 

35 minutes ago, bonienl said:

 

It appears the sysstat package included with Unraid has an issue (only Unraid 6.12 has a working package).

 

I restored the original sysstat package for Unraid 6.9 to 6.11, please update.

No reboot is required, Stats should start working after the upgrade of the plugin.

 

Appears to be working now, thanks for the quick fix!

 

Any chance of being able to save the graphs/data between reboots?  Maybe writing the data to a share or disk?

11 hours ago, bonienl said:

 

It appears the sysstat package included with Unraid has an issue (only Unraid 6.12 has a working package).

 

I restored the original sysstat package for Unraid 6.9 to 6.11, please update.

No reboot is required, Stats should start working after the upgrade of the plugin.

 

I'm running Unraid 6.11.5 and just applied Dynamix System Statistics 2023.02.14 and unfortunately the System Stats is still not working properly on this machine.

2 hours ago, ecuster said:

I'm running Unraid 6.11.5 and just applied Dynamix System Statistics 2023.02.14 and unfortunately the System Stats is still not working properly on this machine.

 

Did you give it some time to fill the graphs?

 

My backup system with Unraid 6.11.5 works fine with the latest plugin version.

 

S3 Sleep Plugin

It does not seem to see my NVME WD_Blue which I'd like to select to be monitored for activity as well.

What is also confusing is the fact that it lists the array HDDs here.

 

 

*edit*

Updated the plugin to 2023.02.13, now the array disks and the unraid thumbdrive are nolonger listed, however my nvme WD blue is still not showing up in the dropdown menu. 

 

Edited February 15, 20233 yr by cholzer

16 hours ago, bonienl said:

 

It appears the sysstat package included with Unraid has an issue (only Unraid 6.12 has a working package).

 

I restored the original sysstat package for Unraid 6.9 to 6.11, please update.

No reboot is required, Stats should start working after the upgrade of the plugin.

 

 

It's working again, thanks! But i had to restart my unraid machine to get it working again properly after the update.

2 hours ago, bonienl said:

 

Did you give it some time to fill the graphs?

 

My backup system with Unraid 6.11.5 works fine with the latest plugin version.

 

The Feb 14th update is working for me.  I did have to wait a few seconds for Real-Time stats to appear, and a minute of so for the Last Day option to start showing data, but that seems reasonable.  No reboot was needed.  No reboot was required.  Thank you for your attention on this issue.

Edited February 14, 20233 yr by S80_UK

Is there any of the dev team looking at fixing the S3 Sleep problem where if the default SSH port is changed from 22, the plugin does not recognise a remote connection on another port and will shut Unraid down whilst still connected?  Thanks.

The new dynamix stats update did fix the Stats graph from not showing anything, but it broke the CPU stats on the Dashboard page. 

 

My CPU dashboard was showing 50% load on my Ryzen Threadripper 3960x. 

The graph was showing gray bars, which was odd to me, cause the bars are usually colored when usage is that high. 

 

I removed the Dynamix Stats plugin and the CPU Dashboard graph went back to the normal load of just 3% when idle. 

2 hours ago, jojo345 said:

After the update, for me there is no more "monitor discs outside array" setting to configurate.

Do you still have this entry showing up on your system?

 

yup, but only a thumbdrive shows up there (this is not the Unraid boot stick it is also an Unassigned Device), the UnassignedDevice 2TB WB_Blue nvme ssd still does not show up.

Edited February 15, 20233 yr by cholzer

s3 sleep stopped functioning after the most recent update.  system does not wake from packet or from keyboard input. 

On 2/15/2023 at 12:27 PM, cholzer said:

yup, but only a thumbdrive shows up there (this is not the Unraid boot stick it is also an Unassigned Device), the UnassignedDevice 2TB WB_Blue nvme ssd still does not show up.

 

I made an update to fix the list of devices outside the array

 

On 2/15/2023 at 12:08 AM, Bob Corless said:

Is there any of the dev team looking at fixing the S3 Sleep problem where if the default SSH port is changed from 22, the plugin does not recognise a remote connection on another port and will shut Unraid down whilst still connected?  Thanks.

 

Latest update supports custom port numbers for telnet and ssh

 

19 hours ago, ConradA said:

s3 sleep stopped functioning after the most recent update.  system does not wake from packet or from keyboard input. 

 

s3_sleep is not used for waking up the system.

You should check your BIOS settings.