Fan Control doesn't seem to detect anything on my machine.

No PWM controller detected.

It is a Gigabyte Z87-HD3.

 

Fan Control doesn't seem to detect anything on my machine.

No PWM controller detected.

It is a ASUS PRIME B450M-A.

 

Thanks.

Hi everyone,
I tried to install the update (2021.05.20) today and I only get this error.

 

plugin: updating: dynamix.system.temp.plg
plugin: run failed: /bin/bash retval: 1

 

Can someone tell me how to solve this error?

Thanks a lot

 

 

8 minutes ago, Tigger30926 said:

大家好，
我今天尝试安装更新（2021.05.20），但仅收到此错误。

 

插件：更新：dynamix.system.temp.plg
插件：运行失败：/ bin / bash retval：1

 

有人可以告诉我如何解决此错误吗？

非常感谢

 

 

The same problem, after deleting the plug-in and restarting, it cannot be installed

55 minutes ago, Tigger30926 said:

Hi everyone,
I tried to install the update (2021.05.20) today and I only get this error.

 

plugin: updating: dynamix.system.temp.plg
plugin: run failed: /bin/bash retval: 1

 

Can someone tell me how to solve this error?

Thanks a lot

 

 

Getting the same thing here, can't see anything in the syslog either. Possibly the update itself?

1 hour ago, Tigger30926 said:

Hi everyone,
I tried to install the update (2021.05.20) today and I only get this error.

 

plugin: updating: dynamix.system.temp.plg
plugin: run failed: /bin/bash retval: 1

 

Can someone tell me how to solve this error?

Thanks a lot

 

 

I get the same thing. Any update on this?

2 hours ago, Tigger30926 said:

Hi everyone,
I tried to install the update (2021.05.20) today and I only get this error.

 

plugin: updating: dynamix.system.temp.plg
plugin: run failed: /bin/bash retval: 1

 

Can someone tell me how to solve this error?

Thanks a lot

 

 

Same issue here. @bonienl

i also have the same issue 

 

plugin: updating: dynamix.system.temp.plg
plugin: run failed: /bin/bash retval: 1

 

I made an updated version 2021.05.20a, please try again.

 

3 minutes ago, bonienl said:

I made an updated version 2021.05.20a, please try again.

 

Seems to be fine now. Thanks for resolving.

Now it works. Thank you!

On 4/21/2020 at 12:38 PM, b0m541 said:

Is any body lucky using Mapquest for Day/Night ? Mapquest makes it easiest to get an account and an API key.

However, unfortunately I always get "No geographical coordinates found for the given address. Please adjust.", no matter what address I put in.

Somebody luckier with MapQuest?

 

Maybe this is the reason: Mapquest seems to be really bad at locating addresses outside of the US.

 

PS: Bing did work but it was a lot more effort to get an account.

 

 

Has this ever been figured out? I'm a new user, just installed Day/Night and am getting the same no address found error.

On 5/17/2021 at 5:49 AM, NLS said:

Fan Control doesn't seem to detect anything on my machine.

No PWM controller detected.

It is a Gigabyte Z87-HD3.

 

I am having a similar problem with my PRIME Z590M-PLUS, system temperature works though.

how does the Fan control work

what does the interveral time mean  what does minum pwm value mean

the exclude for array...  but there is no exclude cpu motherboard  x570 chipset temperature 

so i kinda confused how you set it right ?

for cpu fan too  and is low and high for  full speed and just on  or how u work it out to ramp up slowly ?

 

and how can you rename pwm fans

pwm 1 pwm2 etc means nothing

be nice to change

pwm1  to   Chassis 1 Fan

pwm2 to  CPU Fan

pwm3 to  Chassis 2 Fan

and so on

 

and my motherboard is

ASUS X570 Tuf Gaming Plus board

Edited May 26, 20215 yr by comet424

noob questions here.

 

I Cant seem to find this "PERL" plugin that I need.... could I be pointed to the right direction?

 

thank you

14 minutes ago, adrenalin101 said:

this "PERL"

included in NerdPack

7 minutes ago, trurl said:

included in NerdPack

Thank you thank you

noob questions here.
 
I Cant seem to find this "PERL" plugin that I need.... could I be pointed to the right direction?
 
thank you

Yea, I always felt it should be installed automatically as it is required by the plugin

56 minutes ago, spl147 said:

Yea, I always felt it should be installed automatically as it is required by the plugin

To be fair, it's a system-wide thing.  If you had several plugins using PERL (say, Speedtest), and you uninstalled one of them, would you expect PERL to still be there?

3 hours ago, Cessquill said:

To be fair, it's a system-wide thing.  If you had several plugins using PERL (say, Speedtest), and you uninstalled one of them, would you expect PERL to still be there?

yes if other installed plugins required it, like wize if you uninstall a plugin and no other installed plugins require it. then it should be removed

1 hour ago, spl147 said:

yes if other installed plugins required it, like wize if you uninstall a plugin and no other installed plugins require it. then it should be removed

How should that be coordinated? How would the plugin know if anything else needs it?

The plugin purposely doesn't install PERL to avoid multiple instances and/or different installed versions.

 

Instead 'one source' is used, which is the Nerd pack to install additional packages.

 

Also keep in mind that PERL is only needed to run the detection script, once sensors are known, there is no need for PERL.

 

still unable to get the Fan Control to work right

whats the purpose of the Minutes interval?

i do set up  0 PWM  so the fans wont run    and set the temp 30 low  40 high  but how does  it work on a rising curve?

so 200rpm at 30   and 40 runs at 7500rpm for the fan  or my other fan  200rpm at 30  and 6000rpms on 40  but run in between

 

or in the end  do you have to run  Windows VM  and use the Fancontrol from the motherboard manufacture 

to get it to run right?  its an ASUS motherboard TUF x570

as i find the fans dont come on when they supposed to

 

even if i set to LOW 40  and HIGH 50  and not do exclude of any of the HDS 

it will not come on when 1 hard drive hits   41.5 degrees 

so it seems it doesnt wanna work 100% right least with Asus boards X570

 

also i not sure where the fan control is getting its numbers from for RPM

 

when the Fan is at 0rpms   it shows its running at 2800rpms  so i not sure how this is working its not accurate..   is it because its a X570 board

Edited May 27, 20215 yr by comet424

hello,

First -  Welcome back and hoping for a fast recovery for you. 

second - I'm a noob, to unraid that is. basic linux understanding, proficient in hardware.

here is my issue-  i am trying to get the systems temps to work, have unraid 6.9.2 pro - IBM x3650 M3 latest bios- upon installing system temp, it might see sensors and then go away, even tried several times to flush the config and re-install including perl. and then it shows nothing for senstors or hard drive temps and never showed anything for fan controller.

i noticed this however upon re-installing the plugin again: (highlighted in RED- unraid version too high?)

has this been addressed with a work around prior ? as of 6/2/21 this is the error i get re-installing

 

 

plugin: installing: https://raw.githubusercontent.com/bergware/dynamix/master/unRAIDv6/dynamix.system.temp.plg
plugin: downloading https://raw.githubusercontent.com/bergware/dynamix/master/unRAIDv6/dynamix.system.temp.plg
plugin: downloading: https://raw.githubusercontent.com/bergware/dynamix/master/unRAIDv6/dynamix.system.temp.plg ... done
plugin: downloading: https://raw.githubusercontent.com/bergware/dynamix/master/archive/dynamix.system.temp.txz ... done

+==============================================================================
| Installing new package /boot/config/plugins/dynamix.system.temp/dynamix.system.temp.txz
+==============================================================================

Verifying package dynamix.system.temp.txz.
Installing package dynamix.system.temp.txz:
PACKAGE DESCRIPTION:
Package dynamix.system.temp.txz installed.
plugin: skipping: sensors-detect - Unraid version too high, requires at most version 6.7.2
plugin: skipping: sensors-detect - Unraid version too high, requires at most version 6.7.2

-----------------------------------------------------------
Plugin dynamix.system.temp is installed.
This plugin requires Dynamix webGui to operate
Copyright 2021, Bergware International
Version: 2021.05.20a
-----------------------------------------------------------

plugin: dynamix.system.temp.plg installed

 

then looking at the plugin i see just this:

 

and this :

 

 

and then the same for system and cpu temps:

 

as a followup:

I ran sensors-detect and this is the full result. now if someone could point me in the correct direction for the proper name of the driver i need to use, maybe i can manually load it and see if it detects:

 

 

any help greatly appreciated.

-Bill