Dynamix - V6 Plugins


bonienl

Recommended Posts

1 hour ago, suyac said:

There is nothing in the logs that I could use to troubleshoot this.

And as I wrote before the problem seems that the plugin is removed and still has some effect on the fan curve.

Is this really possible ? How does the plugin actually controlls the fans ?

Are there files created by the plugin outside the flash / config folder that could do this ?

Just a SWAG---  But could the plugins be adjusting the hardware settings on the MB?  That would account for the plugin settings having a residual effect...   

Link to comment
10 hours ago, suyac said:

There is nothing in the logs that I could use to troubleshoot this.

And as I wrote before the problem seems that the plugin is removed and still has some effect on the fan curve.

Is this really possible ? How does the plugin actually controlls the fans ?

Are there files created by the plugin outside the flash / config folder that could do this ?

I dont think so.

 

You need to adjust the temp range, if you set it "wrong" you get wrong behaivior.

 

Also if u removed plugin and restartet, there is nothing left.

Edited by nuhll
Link to comment
On 2/3/2019 at 6:11 PM, nuhll said:

I dont think so.

 

 You need to adjust the temp range, if you set it "wrong" you get wrong behaivior.

 

Also if u removed plugin and restartet, there is nothing left.

Ok, it s good to know that.

 

That means that my motherboard handles the fans in a weird manner.

I ll investigate more in that direction.

Link to comment

Hi, I have the Asus PRIME A320M-A motherboard with a AMD A6 processor, I've tried using this system temp plugin and loaded the lm78 driver but after the drivers are loaded it still says:

"Processor temperature:

 Not used

Mainboard temperature:

 Not used

Array fan speed:

 Not used"

is there a way to fix this or is my motherboard incompatible?

thanks

Link to comment

Is this an academic question?   You can only display two temperatures out the (in your case) thirteen shown in the table.  I have two temperatures on one of my servers that are in the range of 128C.  I would simply pick two that seem indicate the true temperature states of the CPU and MB.  (I personally went with the highest one for each.) 

Link to comment

I currently have both Dynamix System Stats and System Temp plugins installed and they work great.  Many thanks.  Apologies if this has already been asked but my search didn't turn up anything. 

Is there any possibility to integrate historical system temperature data into the System Stats graphs?  I would love to be able to monitor temperatures over time.  If not, can anyone suggest something else that can enable this functionality?  Thanks in advance.  

Link to comment
Thanks for the info, will look into this as I thought pads were generally inferior to TIM compounds.  Now if only I could find a better heatsink for my mobile chip!  My question still stands though, would love to have historical temp data available in some form.


I use 2 dockers for historical info.

Netdata for fine details.

Munin for long term stats history.
Link to comment
11 minutes ago, BillClinton said:

 


I use 2 dockers for historical info.

Netdata for fine details.

Munin for long term stats history.

 

Thanks, I will check these out - they both look promising.  I didn't consider using a separate container for monitoring though it makes sense.  The support thread for the Munin-server container by Jugniji in CA seems to have not been updated for quite a while but there are several other templates available in dockerhub.  I figured that displaying temperature readings would be a natural extension of the system stats plugin and I was somewhat surprised when I couldn't find any mention of it.  Since I have both plugins currently installed and configured, I thought perhaps there was simply a configuration setting I missed to integrate the two for unified data on one display.  The idea being that one could find a peak in CPU usage, say during an intensive transcode operation, and correlate the peak usage with the peak temp. 

 

Link to comment

Hi all.

 

So I'm trying to track down why I have slow read write across my box when it comes to dockers and installed the Dynamix System Stats to find out more.

 

How ever looking at the status Vs the main page memory usage there seems to be a disparity.

 

On the stats page it looks like memory is 99% in use Vs main page 45%

 

Which is the best reading or is it the interpretation by me ?

 

Thanks

 

Terran

 

 

tbmaindoma-diagnostics-20190216-1008.zip

Screenshot_20190216-100419.png

Screenshot_20190216-100241.png

Link to comment
18 minutes ago, bonienl said:

Thanks... I guess I was expecting it to be consistent how ever you may have just pin pointed my problem.

 

If it's caching in to ram and I only have 8gb (Dell stopped you adding more in the bios) it would explain why windows on the same hardware worked different.

 

I'm thinking a cache drive with a swap file may help as I do not have one or would I still see the memory used ?

 

Thanks

 

Terran

Link to comment

I am seeing the following on System Temps Plugin

 

image.png.a834fac7c7312472609c2395535ae9e5.png

 

But IPMI is showing motherboard is SM X9DR3

 

image.thumb.png.7cd6518625a973b77cca302b67438513.png

 

Also can you advise what to check for this log entries, doesnt happen all the time.

 

Feb 16 12:07:02 Test kernel: i801_smbus 0000:00:1f.3: Timeout waiting for interrupt!

Feb 16 12:07:02 Test kernel: i801_smbus 0000:00:1f.3: Transaction timeout

Feb 16 12:07:02 Test kernel: i801_smbus 0000:00:1f.3: Failed terminating the transaction

Feb 16 12:07:02 Test kernel: i801_smbus 0000:00:1f.3: SMBus is busy, can't use it!

Edited by SimonF
Link to comment

root@Tower:/usr/local/emhttp/plugins/dynamix.s3.sleep/scripts# /usr/local/emhttp/plugins/dynamix.s3.sleep/scripts/s3_sleep -ED
sdj=ST3000VN000-1H4167_W300LSRL sde=ST3000VN000-1H4167_Z300RW7B sdk=ST3000VN000-1H4167_Z300TR2S sdi=ST3000VN000-1H4167_Z301FX5N sdd=TOSHIBA_DT01ABA300_43LNH62GS
 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.