[support] pducharme's Dockers support thread

[Pducharme]

2 hours ago, Dazog said:

UniFi 5.7.18 Stable Candidate has been released

 

https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-5-7-18-Stable-Candidate-has-been-released/ba-p/2238507

 

I will put the Beta to this Stable Candidate until it is released.

[CiSCOTM]

5.8.3 testing beta has just been released!

 

https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-5-8-3-Testing-has-been-released/ba-p/2241766

[luisv]

Received a couple of new cameras and looking for the latest Unifi Video Controller Beta; however, I don't see it available yet.  Can you please update to 3.9.2 B1

 

https://community.ubnt.com/t5/UniFi-Video-Beta/UniFi-Video-3-9-2-Beta-1-Release/m-p/2227249

 

 

[Pducharme]

5 hours ago, luisv said:

Received a couple of new cameras and looking for the latest Unifi Video Controller Beta; however, I don't see it available yet.  Can you please update to 3.9.2 B1

 

https://community.ubnt.com/t5/UniFi-Video-Beta/UniFi-Video-3-9-2-Beta-1-Release/m-p/2227249

 

 

 

This is done.  (building right now at docker hub... should be available soon)

 

[luisv]

Thanks!  New cameras adopted and functional.  

[Dazog]

5.7.19 out now

 

https://dl.ubnt.com/unifi/5.7.19-84cd139873/unifi_sysvinit_all.deb

 

https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-5-7-19-Stable-Candidate-has-been-released/ba-p/2244531

Edited February 15, 2018 by Dazog

[RevelRob]

Hi. Sorry for the noob question but if I wanted to switch to this container from the linuxserver one, how would I go about doing that?

 

Thanks!

[Pducharme]

1 minute ago, RevelRob said:

Hi. Sorry for the noob question but if I wanted to switch to this container from the linuxserver one, how would I go about doing that?

 

Thanks!

 

For UniFi Controller or for UniFi-Video-Controller?  IF UniFi controller, I suppose you could go in your linuxserver one, then export your config, then install mine and point to the backup during the wizard, that should work.  (Don't forget to STOP the LS one so they don't conflict each other).

[CiSCOTM]

2 minutes ago, RevelRob said:

Hi. Sorry for the noob question but if I wanted to switch to this container from the linuxserver one, how would I go about doing that?

 

Thanks!

 

Make sure you have a recent UniFi backup, remove the old docker install the new, during the wizard restore the backup. I did the same thing a few months back because of the betas 

[Pducharme]

Just now, CiSCOTM said:

 

Make sure you have a recent UniFi backup, remove the old docker install the new, during the wizard restore the backup. I did the same thing a few months back because of the betas 

 

thanks to confirm it worked like I thought

 

[Pducharme]

On 15/02/2018 at 12:03 AM, Dazog said:

5.7.19 out now

 

https://dl.ubnt.com/unifi/5.7.19-84cd139873/unifi_sysvinit_all.deb

 

https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-5-7-19-Stable-Candidate-has-been-released/ba-p/2244531

 

Building Docker now, should be available very soon.

[RevelRob]

Wow, you guys are fast.

It's for the controller.

That's it huh? Just backup in "Auto Backup", remove linuxserver container, install yours, restore during wizard?
Easy enough!

 

[Pducharme]

Yep I think it's in that spot.  You backup manually (that will download a file), then Stop or Remove the LinuxServer Container, add my container, and restore the backup during the wizard.  You can also try the latest Beta (I just update it), but not that sometime, you can't downgrade it later.

[CiSCOTM]

Yup. My old docker I had set to auto backup at 4 am. I just took that backup one morning and switched to pducharme docker. And restored the backup. 

[CiSCOTM]

The latest beta 5.7.19 is close to being stable. They already have 5.8.3 testing out.  I would install the beta but that’s my thought. 

[CiSCOTM]

3.9.2 beta 1 unifi video just released too 

[RevelRob]

Just now, CiSCOTM said:

The latest beta 5.7.19 is close to being stable. They already have 5.8.3 testing out.  I would install the beta but that’s my thought. 

I'm actually switching to take advantage of the beta as I was using it on a mac prior to building my server.

[Pducharme]

2 minutes ago, CiSCOTM said:

3.9.2 beta 1 unifi video just released too 

 

I already updated the Beta of Video to 3.9.2 b1 3 days ago.

[RevelRob]

Hi, so everything ended up working; however, there seemed to have been an update for the container recently. After i updated, opening the webui brings me to the setup wizard.
Does every update do that?

[sjones0812]

How do I setup the auto backups to go somewhere that I can pull from when I do updates?

[fryfrog]

Anyone running unifi-video 3.9.2 docker? I'm having a bunch of problems w/ it and I haven't had much luck narrowing things down. My cameras get stuck on "managing", logs say the server is sending a re-manage command w/ both the docker ip (which won't work) and the right ip (which will). But they never come online. I even updated their firmware manually, hoping it'd help. That just made downgrading to 3.9.0 not work.

And it *also* isn't showing up in the "cloud" at https://video.ubnt.com anymore.

Will troubleshoot more tomorrow

I think it must be related to whatever runs on port 7440, my 3.9.2 logs are full of errors related to that: https://ptpb.pw/PtPT

Edit: Downgraded camera firmware and went back to 3.9.0 and it is working again.

Edited February 24, 2018 by fryfrog

[spencers]

Any idea why the time is incorrect on my Unifi setup?

 

I checked and unRAID is set to use 0.pool.ntp.org and shows the correct time. Within Unifi, the time zone is set to Central Time (UTC-6). Yet my graphs show that it's currently 8PM when it's actually 2PM. Makes me think the time zone setting is doing nothing at all! How do I fix this?

 

 

 

Edited February 24, 2018 by spencers

[CiSCOTM]

Just now, spencers said:

Any idea why the time is incorrect on my Unifi setup?

 

I checked and unRAID is set to use 0.pool.ntp.org and shows the correct time. Within Unifi, the time zone is set to Central Time (UTC-6). Yet my graphs show that it's currently 8PM when it's actually 2PM. Makes me think the time zone setting is doing nothing at all!

 

 

 

 

 

Yeah, check your sites preferences. Click the 3 dots in the top right. Prob set to UTC time. 

 

[spencers]

7 minutes ago, CiSCOTM said:

Yeah, check your sites preferences. Click the 3 dots in the top right. Prob set to UTC time. 

Wow, that was buried in a place I wouldn't have expected. That solved it! Thank you

[H2O_King89]

16 hours ago, fryfrog said:

Anyone running unifi-video 3.9.2 docker? I'm having a bunch of problems w/ it and I haven't had much luck narrowing things down. My cameras get stuck on "managing", logs say the server is sending a re-manage command w/ both the docker ip (which won't work) and the right ip (which will). But they never come online. I even updated their firmware manually, hoping it'd help. That just made downgrading to 3.9.0 not work.

And it *also* isn't showing up in the "cloud" at https://video.ubnt.com anymore.

Will troubleshoot more tomorrow

I think it must be related to whatever runs on port 7440, my 3.9.2 logs are full of errors related to that: https://ptpb.pw/PtPT

Edit: Downgraded camera firmware and went back to 3.9.0 and it is working again.

Im having issues too and won't record.

How did you downgrade?

 

there forums are reporting issues too with the ver.

Edited February 25, 2018 by H2O_King89