December 22, 201411 yr Okay i've done quite a bit of research on this issue however, I've had no luck at solving it. I've created a new share called apps, that is only on my cache drive (BTRFS) a folder in that share called Docker I then point the docker page to place a 40gb .img file /mnt/cache/apps/docker/docker.img I then use https://github.com/gfjardim/docker-containers/tree/templates then i press "Save" then "Start" Click the "Big Green +" Go to templates drop down..... Nothing populates... This is where i need help. I've tried different Shares, Different drives. Different Img sizes. I did not update from a previous version this is a 100% fresh install so dockerman shouldn't be an issue. I've also tried different repos. http://pastebin.com/AiHTgEqb Log file Any help would be wonderful. and if i've missed a step or anything please let me know. Thanks in advance.
December 25, 201411 yr Drazzilb, I found out that my unraid server couldn't access the internet, thus couldn't load the templates. if you go to terminal and try to ping a website, if it doesn't work, try enabling dns server, reboot and then try adding containers from the docker page.
December 26, 201411 yr Author Drazzilb, I found out that my unraid server couldn't access the internet, thus couldn't load the templates. if you go to terminal and try to ping a website, if it doesn't work, try enabling dns server, reboot and then try adding containers from the docker page. Well I did the ping and that worked fine. That was a good lead. However, When I telnet to my server I got this message. ERROR: device scan failed '/mnt/cache/docker.img' - Block device required Thanks in advance. Well idk what happens it appears everything is working just fine. TYVM
Archived
This topic is now archived and is closed to further replies.