December 30, 201411 yr Hello Unraid Forums, I am new to unraid and have been playing around with 6.0-beta12. My hardware is an old Dell Precision 690 which has both an SATA controller and an SAS controller, an LSI SAS 1068 IR I believe. I have three hard drives that i have been connecting in different configurations. While the hard drives work correctly when connected to the SATA controller, anytime i connect one the SAS controller it stays spun up at all times. I have tried using spindown timers and the spindown button in the webgui to no avail the drive always appears as active in the webGui. I tried getting the power state of the drive using hdparm and the result was SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 drive state is: standby Being unfamiliar with hdparm and linux in general, I am not certain what this result means or where to go from here. I was hoping to be able to use all the available ports, both sata and sas, on this box for unraid. Any information would be appreciated.
Archived
This topic is now archived and is closed to further replies.