Could you update jdupes to newer version? Current version is bugged, see: https://github.com/jbruchon/jdupes/releases for 1.15 release. I personally would like/need at least 1.18.1 for the newer/older filter

I fix the problems with dig and nslookup.

wget http://slackware.cs.utah.edu/pub/slackware/slackware64-current/slackware64/n/krb5-1.18.3-x86_64-1.txz
upgradepkg --install-new krb5-1.18.3-x86_64-1.txz
wget http://slackware.cs.utah.edu/pub/slackware/slackware64-current/slackware64/l/json-c-0.15_20200726-x86_64-1.txz
upgradepkg --install-new json-c-0.15_20200726-x86_64-1.txz

Note that this upgrades json-c.

Package json-c-0.15_20200726-x86_64-1.txz installed. Package json-c-0.13.1-x86_64-1 upgraded with new package ./json-c-0.15_20200726-x86_64-1.txz.

/usr/lib64/libjson-c.so.4 is replaced with /usr/lib64/libjson-c.so.5.
 
I don't know what else relies on the older version of json-c.

ldd $(which dig)
        linux-vdso.so.1 (0x00007ffebdd8f000)
        libdns.so.1608 => /usr/lib64/libdns.so.1608 (0x00001501e86b2000)
        libirs.so.1601 => /usr/lib64/libirs.so.1601 (0x00001501e86a5000)
        libbind9.so.1600 => /usr/lib64/libbind9.so.1600 (0x00001501e8691000)
        libns.so.1605 => /usr/lib64/libns.so.1605 (0x00001501e8648000)
        libisccfg.so.1601 => /usr/lib64/libisccfg.so.1601 (0x00001501e8614000)
        libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00001501e85c3000)
        libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00001501e84eb000)
        libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00001501e84bd000)
        libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00001501e84b7000)
        liblmdb.so.0.0.0 => /usr/lib64/liblmdb.so.0.0.0 (0x00001501e84a0000)
        libisc.so.1607 => /usr/lib64/libisc.so.1607 (0x00001501e8425000)
        libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00001501e814b000)
        libjson-c.so.5 => /usr/lib64/libjson-c.so.5 (0x00001501e8136000)
        libuv.so.1 => /usr/lib64/libuv.so.1 (0x00001501e8105000)
        libxml2.so.2 => /usr/lib64/libxml2.so.2 (0x00001501e7f9f000)
        libz.so.1 => /lib64/libz.so.1 (0x00001501e7d88000)
        libidn2.so.0 => /usr/lib64/libidn2.so.0 (0x00001501e7d69000)
        libdl.so.2 => /lib64/libdl.so.2 (0x00001501e7d64000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00001501e7d40000)
        libc.so.6 => /lib64/libc.so.6 (0x00001501e7b5b000)
        /lib64/ld-linux-x86-64.so.2 (0x00001501e88e4000)
        libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x00001501e7b4c000)
        libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00001501e7b45000)
        libresolv.so.2 => /lib64/libresolv.so.2 (0x00001501e7b2a000)
        librt.so.1 => /lib64/librt.so.1 (0x00001501e7b1e000)
        libnsl.so.1 => /lib64/libnsl.so.1 (0x00001501e7b03000)
        liblzma.so.5 => /lib64/liblzma.so.5 (0x00001501e78dd000)
        libm.so.6 => /lib64/libm.so.6 (0x00001501e7790000)
        libunistring.so.2 => /usr/lib64/libunistring.so.2 (0x00001501e740e000)

 
Updated bind and json-c and added krb5

Could you update jdupes to newer version? Current version is bugged, see: https://github.com/jbruchon/jdupes/releases for 1.15 release. I personally would like/need at least 1.18.1 for the newer/older filter

Updated

Having a bit of a nightmare just trying to run a python 3 script. I've (re)installed python 3 via nerd tools and pip via terminal but I can't install the future module. I reach out to the team who made the script and according to them, my python3 installation is missing files. I attempted to uninstall python3 and reinstall it, but nerd tools won't uninstall it. I removed nerd tools entirely and reinstalled it, but this did nothing to alleviate my issue.

I am on Unraid 6.8.3 using Nerd tools 2019.12.31, Python 3.9.0, and Pip 20.3.

When I run 'python3 -m pip install future' or 'pip3 install future' I get the attached error.

Any help would be greatly appreciated!

Having a bit of a nightmare just trying to run a python 3 script. I've (re)installed python 3 via nerd tools and pip via terminal but I can't install the future module. I reach out to the team who made the script and according to them, my python3 installation is missing files. I attempted to uninstall python3 and reinstall it, but nerd tools won't uninstall it. I removed nerd tools entirely and reinstalled it, but this did nothing to alleviate my issue.

I am on Unraid 6.8.3 using Nerd tools 2019.12.31, Python 3.9.0, and Pip 20.3.

When I run 'python3 -m pip install future' or 'pip3 install future' I get the attached error.

Any help would be greatly appreciated!

Looks like you need libffi

21 hours ago, dmacias said:

21 hours ago, DeathByDentures said:

Having a bit of a nightmare just trying to run a python 3 script. I've (re)installed python 3 via nerd tools and pip via terminal but I can't install the future module. I reach out to the team who made the script and according to them, my python3 installation is missing files. I attempted to uninstall python3 and reinstall it, but nerd tools won't uninstall it. I removed nerd tools entirely and reinstalled it, but this did nothing to alleviate my issue.

I am on Unraid 6.8.3 using Nerd tools 2019.12.31, Python 3.9.0, and Pip 20.3.

When I run 'python3 -m pip install future' or 'pip3 install future' I get the attached error.

Any help would be greatly appreciated!

Looks like you need libffi

Thank you. I was able to install libffi via nerd pack and get my script running. Thanks!

Your commands:

wget http://slackware.cs.utah.edu/pub/slackware/slackware64-current/slackware64/l/json-c-0.15_20200726-x86_64-1.txz
upgradepkg --install-new json-c-0.15_20200726-x86_64-1.txz

work perfectly.  

 

But nerdpack is not working at all for JSON-C.  I tried many many times to get nerdpack to work correctly.  

 

"Host" has dependencies in kbd, json-c and libgssi-kbd (and perhaps more I had already)  I could not get past json-c dependency. I was not sure if you were saying you updated NERD pack recently to the new version, but it does not appear to work.  Would be nice if those were added as dependencies to auto install.  This one was easy to figure out, but another program I used before (pybashtop?) was exceptionally difficult to find the dependency. This is more of a long term wish. 

 

In the short term, need to fix json-c

 

To be explicit, the address and command you gave HERE worked fine, and once installed, host worked fine but the install script must have a typo.

Edited December 3, 20205 yr by AndyT86

Your commands:
wget http://slackware.cs.utah.edu/pub/slackware/slackware64-current/slackware64/l/json-c-0.15_20200726-x86_64-1.txz
upgradepkg --install-new json-c-0.15_20200726-x86_64-1.txz
work perfectly.  
 
But nerdpack is not working at all for JSON-C.  I tried many many times to get nerdpack to work correctly.  
 
"Host" has dependencies in kbd, json-c and libgssi-kbd (and perhaps more I had already)  I could not get past json-c dependency. I was not sure if you were saying you updated NERD pack recently to the new version, but it does not appear to work.  Would be nice if those were added as dependencies to auto install.  This one was easy to figure out, but another program I used before (pybashtop?) was exceptionally difficult to find the dependency. This is more of a long term wish. 
 
In the short term, need to fix json-c
 
To be explicit, the address and command you gave HERE worked fine, and once installed, host worked fine but the install script must have a typo.

I updated bind, json-c and added krb5. If I remember I'll add the auto select of dependencies for bind next time I update the plugin

I am trying to install libffi but do not see it in Nerdtools. I'm on Unraid 6.9 Beta35. I tried uninstalling Nerdtools and reinstalling but it did not work. Am I missing something? 

I am trying to install libffi but do not see it in Nerdtools. I'm on Unraid 6.9 Beta35. I tried uninstalling Nerdtools and reinstalling but it did not work. Am I missing something? 

It's included in 6.9

Your commands:
wget http://slackware.cs.utah.edu/pub/slackware/slackware64-current/slackware64/l/json-c-0.15_20200726-x86_64-1.txz
upgradepkg --install-new json-c-0.15_20200726-x86_64-1.txz
work perfectly.  
 
But nerdpack is not working at all for JSON-C.  I tried many many times to get nerdpack to work correctly.  
 
"Host" has dependencies in kbd, json-c and libgssi-kbd (and perhaps more I had already)  I could not get past json-c dependency. I was not sure if you were saying you updated NERD pack recently to the new version, but it does not appear to work.  Would be nice if those were added as dependencies to auto install.  This one was easy to figure out, but another program I used before (pybashtop?) was exceptionally difficult to find the dependency. This is more of a long term wish. 
 
In the short term, need to fix json-c
 
To be explicit, the address and command you gave HERE worked fine, and once installed, host worked fine but the install script must have a typo.

The "underscore" in the version was messing up json-c. I renamed it

50 minutes ago, dmacias said:

2 hours ago, CybranNakh said:

I am trying to install libffi but do not see it in Nerdtools. I'm on Unraid 6.9 Beta35. I tried uninstalling Nerdtools and reinstalling but it did not work. Am I missing something? 

It's included in 6.9

Ah! That makes sense now. Thank you very much!!! 

 

+1

Edited December 4, 20205 yr by CybranNakh

Hello, is bison available with this package?  I noticed in some search results that led to this post had bison in it, but when I install the plugin, I don't see bison anywhere.  Thanks.

On 9/10/2020 at 11:38 AM, ksignorini said:

So I upgraded UnRAID to 6.8.3 and rebooted. I now see neofetch in the list. I chose to install it and hit Apply. It shows it being installed in the scrolling log. When it returns to the Nerd Pack setting page, it says uninstalled.

 

I've never had this happen with a Nerd Pack item before.

 

Ideas?

I'm not sure why, since it seems like you're no longer having this problem @ksignorini, but I'm not having this exact issue with neofetch. I'm on 6.8.3 and Nerdpack is up to date. Any ideas @dmacias?

Anyway to get "fish" shell updated? The nerdpack is rocking version 2.x, but a lot of the plugins I need require version >3.x

Where are the binaries for these programs saved / retrieved from?  Or does NerdPack pull the source code and compile locally when you toggle a program/library on?

Edited December 18, 20205 yr by nukem492

Where are the binaries for these programs saved / retrieved from?  Or does NerdPack pull the source code and compile locally when you toggle a program/library on?

The binaries are all within Slackware packages hosted on my github. Some are compiled by me and some are from other repositories. When installed, the Slackware package are downloaded to the flash drive then installed. When rebooting the server they are installed from the flash drive.

Anyway to get "fish" shell updated? The nerdpack is rocking version 2.x, but a lot of the plugins I need require version >3.x

Updated to 3.1

Is there any chance of getting LAME and FLAC as part of the tools provided? 

 

I'm doing a bunch of things via cli and installing VM to do run these commands seems dumb. 

Is anyone else having trouble installing perl? When I go to add it, it jumps straight to "Installing", whereas something like python will go to "Downloading", the "Installing". Even though the toggle switch is set to "yes" for perl, the status is uninstalled.

On 12/30/2020 at 11:08 AM, bamhm182 said:

Is anyone else having trouble installing perl? When I go to add it, it jumps straight to "Installing", whereas something like python will go to "Downloading", the "Installing". Even though the toggle switch is set to "yes" for perl, the status is uninstalled.

Yes, I'm setting up a brand new unraid box and the nerdtools plugin I just installed will not actually install perl. It also has "lost" netcatBSD from the list after I tried to install that. I've used nerd tools for a long time and have never had any issue---but something weird happening with the latest one. 

 

I tried deinstalling, rebooting and reinstalling nerd tools. Did not change the problem. I did not try to install anything else.

Can you add glusterfs?
https://slackbuilds.org/repository/14.2/network/glusterfs/

Any possibility to add sshpass?

 

In conjunction with user.scripts I'm hoping to implement something like :

#!/bin/bash
#argumentDescription=Enter password and box name (mypass pihole)
sshpass -p $1 ssh pi@$2.rmac "sudo dd bs=4M if=/dev/mmcblk0 status=progress | gzip -1 - " | dd of=/mnt/user/Backups/$2/$(date +%Y%m%d\_%H%M%S)\_$box.gz

I run 4 different Raspberry Pi boxes.  They run for a good long time, but I've just had the third SD card fail.  I would like to keep an image where I can recover quickly with minimal pain. 

I have python2 and pip installed, however...

 

root@server:~# pip install docker
-bash: /usr/bin/pip: /usr/bin/python3: bad interpreter: No such file or directory
root@server:~# python -m pip
/usr/bin/python: No module named pip

 

Somehow pip is looking for Python3, which I don't have installed. If I install it well, it works but for Python3, I need pip for Python2. I noticed there is a pip3 command as well, not sure why the default pip command isn't configured correctly.

Edited January 22, 20215 yr by dnLL

is there a chance to get btrbk added to Nerd Pack? I would like to have the unraid server trigger my backup scripts