[Deprecated] tobbenb's Docker Template Repository - WebGrab+Plus


Recommended Posts

output is  :

 

drwxrwxrwx  2 nobody users     23 Sep 22 13:04 ./
drwxrwxrwx 13 nobody users    194 Sep 22 09:40 ../
-rw-r--r--  1 nobody users 166632 Sep 22 13:04 guide.xml

 

 

I found the problem. It's the * in tv_grab_wg in the xml file path. It works when doing cat as a standalone command, but fails in the script. I'll push an update soon to fix it in the tvheadend version (Linuxserver)

 

Thanks!!

 

Hi Saarg, the update is working thank you for the support!!

 

Thanks for the confirmation :)

Link to comment
  • Replies 772
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I know the version of this repo is gonna die, but this thread seems to be still active. I did get the other version of oscam though.

 

I used to run oscam on a raspberry pi and would like my unraid server to do it. I set up oscam like I did with my rpi, I pretty much just used the same configs. I do get my card to read since I can see the entitlements. However, my problem is the users connecting to oscam - they dont. The clients use CCcam, I changed the C-Line to include the IP of my unraid machine. I forwarded the cccam port set in the oscam config (49384 in my case) to the unraid machine

 

What am I doing wrong? Im fairley sure its to do with the port...

 

Any help is appreciated !

Link to comment

True. I'll post it there too  :)

 

Edit: Nevermind, Im an idiot. It was set up as bridged...gotta be a host obviously. I see my cleint now, yay !

I can answer here also. No need to use host. You didn't add the ports you use in your c-lines to the Oscam template and then it will for sure not work.

Change it back to bridge, add your ports and hit apply. Then everything should work.

Link to comment
  • 2 weeks later...

I've recently started having problems with the WebGrabPlusPlus docker.  It had been working fine, but recently would not start, I believe after installing an upgrade in the past day or two.  Here is the log:

 

*** Running /etc/my_init.d/startup.sh...
/etc/my_init.d/startup.sh: 44: /etc/my_init.d/startup.sh: sudo: not found
*** /etc/my_init.d/startup.sh failed with status 127

 

Has anybody seen this or have any idea what could be happening?  I've tried deleting and reinstalling the docker image but no luck.

 

Thanks!

Link to comment

I've recently started having problems with the WebGrabPlusPlus docker.  It had been working fine, but recently would not start, I believe after installing an upgrade in the past day or two.  Here is the log:

 

*** Running /etc/my_init.d/startup.sh...
/etc/my_init.d/startup.sh: 44: /etc/my_init.d/startup.sh: sudo: not found
*** /etc/my_init.d/startup.sh failed with status 127

 

Has anybody seen this or have any idea what could be happening?  I've tried deleting and reinstalling the docker image but no luck.

 

Thanks!

 

Yeah, sorry about that. I upgraded the base image and they removed the sudo binaries from that version.

I started a new build which should be finished soon.

Link to comment
  • 2 weeks later...

I'm having a new issue with WebGrab+ since upgrading last week. It seems that the daily updates are no longer being run. Here is an excerpt from my log for the past 24 hours:

 

Oct 24 10:17:01 83693064cfc5 CRON[48]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 11:17:01 83693064cfc5 CRON[51]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 12:17:01 83693064cfc5 CRON[54]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 13:17:01 83693064cfc5 CRON[57]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 14:17:01 83693064cfc5 CRON[60]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 15:17:01 83693064cfc5 CRON[63]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 16:17:01 83693064cfc5 CRON[66]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 17:17:01 83693064cfc5 CRON[69]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 18:17:01 83693064cfc5 CRON[72]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 19:17:01 83693064cfc5 CRON[75]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 20:17:01 83693064cfc5 CRON[78]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 21:17:01 83693064cfc5 CRON[81]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 22:17:01 83693064cfc5 CRON[84]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 23:17:01 83693064cfc5 CRON[87]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 00:17:01 83693064cfc5 CRON[90]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 01:17:01 83693064cfc5 CRON[93]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 02:02:01 83693064cfc5 CRON[96]: (nobody) CMD (/wg++/update.sh)
Oct 25 02:02:33 83693064cfc5 CRON[95]: (CRON) info (No MTA installed, discarding output)
Oct 25 02:17:01 83693064cfc5 CRON[109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 03:17:01 83693064cfc5 CRON[112]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 04:17:01 83693064cfc5 CRON[115]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 05:17:01 83693064cfc5 CRON[118]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:17:01 83693064cfc5 CRON[121]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:25:01 83693064cfc5 CRON[124]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Oct 25 06:27:22 83693064cfc5 CRON[123]: (CRON) info (No MTA installed, discarding output)
Oct 25 07:17:01 83693064cfc5 CRON[197]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

 

If I restart the container, the update will run.  Any thoughts?

 

Thanks in advance.

Link to comment

I'm having a new issue with WebGrab+ since upgrading last week. It seems that the daily updates are no longer being run. Here is an excerpt from my log for the past 24 hours:

 

Oct 24 10:17:01 83693064cfc5 CRON[48]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 11:17:01 83693064cfc5 CRON[51]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 12:17:01 83693064cfc5 CRON[54]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 13:17:01 83693064cfc5 CRON[57]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 14:17:01 83693064cfc5 CRON[60]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 15:17:01 83693064cfc5 CRON[63]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 16:17:01 83693064cfc5 CRON[66]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 17:17:01 83693064cfc5 CRON[69]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 18:17:01 83693064cfc5 CRON[72]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 19:17:01 83693064cfc5 CRON[75]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 20:17:01 83693064cfc5 CRON[78]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 21:17:01 83693064cfc5 CRON[81]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 22:17:01 83693064cfc5 CRON[84]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 23:17:01 83693064cfc5 CRON[87]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 00:17:01 83693064cfc5 CRON[90]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 01:17:01 83693064cfc5 CRON[93]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 02:02:01 83693064cfc5 CRON[96]: (nobody) CMD (/wg++/update.sh)
Oct 25 02:02:33 83693064cfc5 CRON[95]: (CRON) info (No MTA installed, discarding output)
Oct 25 02:17:01 83693064cfc5 CRON[109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 03:17:01 83693064cfc5 CRON[112]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 04:17:01 83693064cfc5 CRON[115]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 05:17:01 83693064cfc5 CRON[118]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:17:01 83693064cfc5 CRON[121]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:25:01 83693064cfc5 CRON[124]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Oct 25 06:27:22 83693064cfc5 CRON[123]: (CRON) info (No MTA installed, discarding output)
Oct 25 07:17:01 83693064cfc5 CRON[197]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

 

If I restart the container, the update will run.  Any thoughts?

 

Thanks in advance.

I'll look at it later when I get home.

Link to comment

I'm having a new issue with WebGrab+ since upgrading last week. It seems that the daily updates are no longer being run. Here is an excerpt from my log for the past 24 hours:

 

Oct 24 10:17:01 83693064cfc5 CRON[48]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 11:17:01 83693064cfc5 CRON[51]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 12:17:01 83693064cfc5 CRON[54]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 13:17:01 83693064cfc5 CRON[57]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 14:17:01 83693064cfc5 CRON[60]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 15:17:01 83693064cfc5 CRON[63]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 16:17:01 83693064cfc5 CRON[66]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 17:17:01 83693064cfc5 CRON[69]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 18:17:01 83693064cfc5 CRON[72]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 19:17:01 83693064cfc5 CRON[75]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 20:17:01 83693064cfc5 CRON[78]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 21:17:01 83693064cfc5 CRON[81]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 22:17:01 83693064cfc5 CRON[84]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 24 23:17:01 83693064cfc5 CRON[87]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 00:17:01 83693064cfc5 CRON[90]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 01:17:01 83693064cfc5 CRON[93]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 02:02:01 83693064cfc5 CRON[96]: (nobody) CMD (/wg++/update.sh)
Oct 25 02:02:33 83693064cfc5 CRON[95]: (CRON) info (No MTA installed, discarding output)
Oct 25 02:17:01 83693064cfc5 CRON[109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 03:17:01 83693064cfc5 CRON[112]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 04:17:01 83693064cfc5 CRON[115]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 05:17:01 83693064cfc5 CRON[118]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:17:01 83693064cfc5 CRON[121]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Oct 25 06:25:01 83693064cfc5 CRON[124]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Oct 25 06:27:22 83693064cfc5 CRON[123]: (CRON) info (No MTA installed, discarding output)
Oct 25 07:17:01 83693064cfc5 CRON[197]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)

 

If I restart the container, the update will run.  Any thoughts?

 

Thanks in advance.

 

The job is run, but nothing is logged as you can see from your log below.

 

Oct 25 02:02:01 83693064cfc5 CRON[96]: (nobody) CMD (/wg++/update.sh)
Oct 25 02:02:33 83693064cfc5 CRON[95]: (CRON) info (No MTA installed, discarding output)

Link to comment
  • 2 months later...

Would it be possible to update tvheadend-unstable docker to the latest git version? I would need a fix integrated in latest version only, but I do not have enough energy to successfully migrate a container to another TVHeadend image.

 

It should only be a matter of copying the appdata to a new folder and make sure everything is in the root of the appdata folder and not in  .hts folder. I don't remember how it was in this one anymore and I'm away until next week, so can't check.

You also need to setup xmltv grabbing if you used that as the binary location changed.

I'm talking about migrating to the linuxserver version now.

 

Do ls -la in the appdata folder and I'll know how to proceed.

Link to comment
  • 4 weeks later...

can someone help me with mycron file please - I've set it to every 5 mins as I want to do some testing, but it's not getting picked up when I check with

 

 

docker exec -it WebGrabPlusPlus crontab -u nobody -l

 

What file format should I save the mycron file in when created with notepad++?

 

Thanks

Link to comment

can someone help me with mycron file please - I've set it to every 5 mins as I want to do some testing, but it's not getting picked up when I check with

 

 

docker exec -it WebGrabPlusPlus crontab -u nobody -l

 

What file format should I save the mycron file in when created with notepad++?

 

Thanks

 

No ending. Just simply mycron.

Link to comment

can someone help me with mycron file please - I've set it to every 5 mins as I want to do some testing, but it's not getting picked up when I check with

 

 

docker exec -it WebGrabPlusPlus crontab -u nobody -l

 

What file format should I save the mycron file in when created with notepad++?

 

Thanks

 

No ending. Just simply mycron.

 

 

Hmm, that's what I have so not sure why the guide.xml isn't updating:

 

 

My Mappings:

 

 

/data  /mnt/cache/recordings/xmltv
/config  /mnt/cache/appdata/WebGrabPlusPlus

 

 

- moved my ini files from the UK folder to the root folder

- copied the channels I wanted to WebGrab++.config.xml

 

 

Maybe every 5 mins is to often - going to try every 30.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.