saarg Posted February 20, 2017 Author Share Posted February 20, 2017 can someone help me with mycron file please - I've set it to every 5 mins as I want to do some testing, but it's not getting picked up when I check with docker exec -it WebGrabPlusPlus crontab -u nobody -l What file format should I save the mycron file in when created with notepad++? Thanks No ending. Just simply mycron. Hmm, that's what I have so not sure why the guide.xml isn't updating: My Mappings: /data /mnt/cache/recordings/xmltv /config /mnt/cache/appdata/WebGrabPlusPlus - moved my ini files from the UK folder to the root folder - copied the channels I wanted to WebGrab++.config.xml Maybe every 5 mins is to often - going to try every 30. What does the log say? Did you restart the container as the OP says? Quote Link to comment
DZMM Posted February 20, 2017 Share Posted February 20, 2017 can someone help me with mycron file please - I've set it to every 5 mins as I want to do some testing, but it's not getting picked up when I check with docker exec -it WebGrabPlusPlus crontab -u nobody -l What file format should I save the mycron file in when created with notepad++? Thanks No ending. Just simply mycron. Hmm, that's what I have so not sure why the guide.xml isn't updating: My Mappings: /data /mnt/cache/recordings/xmltv /config /mnt/cache/appdata/WebGrabPlusPlus - moved my ini files from the UK folder to the root folder - copied the channels I wanted to WebGrab++.config.xml Maybe every 5 mins is to often - going to try every 30. What does the log say? Did you restart the container as the OP says? I just did a search for 'restart' on the first page and I hadn't seen the post underneath before that says: Removed symlinks to wget.bat and wget.exe in the config folder. Files are now copied on first start. You will have to delete the symlinks manually and then restart the container. After that the files will be copied. Just making sure I understand this - I have to delete wget.bat and wget.exe from /mnt/cache/appdata/WebGrabPlusPlus and then restart the docker? Quote Link to comment
DZMM Posted February 21, 2017 Share Posted February 21, 2017 On 2/20/2017 at 0:38 AM, DZMM said: I just did a search for 'restart' on the first page and I hadn't seen the post underneath before that says: Just making sure I understand this - I have to delete wget.bat and wget.exe from /mnt/cache/appdata/WebGrabPlusPlus and then restart the docker? Bumping as in case notifications are off following the migration ;-) Quote Link to comment
saarg Posted February 21, 2017 Author Share Posted February 21, 2017 24 minutes ago, DZMM said: Bumping as in case notifications are off following the migration ;-) Did you read what I wrote? I asked if you restarted the container, not deleting stuff. What you found is a changelog entry from long before you installed the container, but managed to jump over the relevant part Quote Link to comment
DZMM Posted February 21, 2017 Share Posted February 21, 2017 (edited) 17 minutes ago, saarg said: Did you read what I wrote? I asked if you restarted the container, not deleting stuff. What you found is a changelog entry from long before you installed the container, but managed to jump over the relevant part Sorry, thought you must have meant more than just restart the container as I've done that several times e.g. it restarts after every overnight appdata backup - so I felt a bit guilty about reading the first post properly so I read the first few e-2-e Edited February 21, 2017 by DZMM Quote Link to comment
saarg Posted February 21, 2017 Author Share Posted February 21, 2017 14 minutes ago, DZMM said: Sorry, thought you must have meant more than just restart the container as I've done that several times e.g. it restarts after every overnight appdata backup - so I felt a bit guilty about reading the first post properly so I read the first few e-2-e It's hard to help when you don't really answer the questions I ask. When changing the mycron file you need to restart the container after the edit. Second, you need it to be in unix format. That means no notepad/wordpad! Use notepad++ or nano in unraid. Post the log and the content of the mycron file. Also ls -la of your appdata folder. Quote Link to comment
DZMM Posted February 22, 2017 Share Posted February 22, 2017 On 2/21/2017 at 9:49 AM, saarg said: It's hard to help when you don't really answer the questions I ask. When changing the mycron file you need to restart the container after the edit. Second, you need it to be in unix format. That means no notepad/wordpad! Use notepad++ or nano in unraid. Post the log and the content of the mycron file. Also ls -la of your appdata folder. sorted, but decided to just use OTA details Quote Link to comment
s.Oliver Posted March 8, 2017 Share Posted March 8, 2017 hey pals, i'm helping a friend to built his 1st unRAID-server with TVHeadend docker. as i'm on cable (using a tbs 6205 card) i struggle a bit to decide which tbs-card is the right one for him. he would like to go with a quad-tuner card so there are (at least) this two: TBS-6904/6905. the only difference between the two is the 6905 offers additionally multi-input-stream support (i guess it's the newer model). they cost the same, so probably (if nobody sees/knows a good reason against it) we could go ahead and buy the TBS-6905. does anybody maybe got the card already and/or knows that it works/is supported flawlessly? thx. for tipps/help! :-) Quote Link to comment
saarg Posted March 8, 2017 Author Share Posted March 8, 2017 I don't know how the support is for the 6905, but it has been out for a while now, so should be well supported. Maybe @CHBMB knows more. Quote Link to comment
CHBMB Posted March 8, 2017 Share Posted March 8, 2017 2 hours ago, s.Oliver said: hey pals, i'm helping a friend to built his 1st unRAID-server with TVHeadend docker. as i'm on cable (using a tbs 6205 card) i struggle a bit to decide which tbs-card is the right one for him. he would like to go with a quad-tuner card so there are (at least) this two: TBS-6904/6905. the only difference between the two is the 6905 offers additionally multi-input-stream support (i guess it's the newer model). they cost the same, so probably (if nobody sees/knows a good reason against it) we could go ahead and buy the TBS-6905. does anybody maybe got the card already and/or knows that it works/is supported flawlessly? thx. for tipps/help! :-) Both should work with either the opensource drivers or the closed source. I'd recommend the opensource as that is where TBS dev is being concentrated going forward. Can't guarantee is will be flawless, but I've got a TBS card and it's pretty damn reliable with the opensource drivers. Use the Unraid DVB Plugin to install the drivers and reboot and then use the Linuxserver version of TVHeadEnd and all should be good. Don't waste your time with @saarg's old version of TVHeadend.... Quote Link to comment
saarg Posted March 8, 2017 Author Share Posted March 8, 2017 1 minute ago, CHBMB said: Both should work with either the opensource drivers or the closed source. I'd recommend the opensource as that is where TBS dev is being concentrated going forward. Can't guarantee is will be flawless, but I've got a TBS card and it's pretty damn reliable with the opensource drivers. Use the Unraid DVB Plugin to install the drivers and reboot and then use the Linuxserver version of TVHeadEnd and all should be good. Don't waste your time with @saarg's old version of TVHeadend.... I should really just delete the old one from the hub. I forgot about it Quote Link to comment
dockerPolice Posted March 10, 2017 Share Posted March 10, 2017 On 08/03/2017 at 10:31 AM, saarg said: I should really just delete the old one from the hub. I forgot about it Quote Link to comment
saarg Posted March 10, 2017 Author Share Posted March 10, 2017 (edited) I'm sorry, Mr. Officer.... Edited March 10, 2017 by saarg Quote Link to comment
s.Oliver Posted March 30, 2017 Share Posted March 30, 2017 well i can tell from pretty short tests that it indeed seems to be working. more on it, when it is in full use. thx. so far. Quote Link to comment
pepper Posted May 18, 2017 Share Posted May 18, 2017 Any chance of an update?? [ Debug ] [ Debug ] Running on: Unix 4.9.19.0 [ Debug ] Environment: 4.0.30319.17020 [ Debug ] Mono version: 4.2.1 (Debian 4.2.1.102+dfsg2-7ubuntu4) [ Debug ] [ Debug ] Loading timezone data [ Debug ] Embedded timezones source: WGconsole.WG.Common.timezonesdata.txt [ Debug ] Reading config file: /config/WebGrab++.config.xml [ Info ] found: /config/zap2it.com.ini -- Revision 05 [Warning ] Incompatible version of /config/zap2it.com.ini [Warning ] SW V1.57 should be >= SiteIni V2.0: [Warning ] Upgrade your WebGrab+Plus version to V2.0 or higher!! @http://www.webgrabplus.com/download Quote Link to comment
saarg Posted May 19, 2017 Author Share Posted May 19, 2017 14 hours ago, pepper said: Any chance of an update?? [ Debug ] [ Debug ] Running on: Unix 4.9.19.0 [ Debug ] Environment: 4.0.30319.17020 [ Debug ] Mono version: 4.2.1 (Debian 4.2.1.102+dfsg2-7ubuntu4) [ Debug ] [ Debug ] Loading timezone data [ Debug ] Embedded timezones source: WGconsole.WG.Common.timezonesdata.txt [ Debug ] Reading config file: /config/WebGrab++.config.xml [ Info ] found: /config/zap2it.com.ini -- Revision 05 [Warning ] Incompatible version of /config/zap2it.com.ini [Warning ] SW V1.57 should be >= SiteIni V2.0: [Warning ] Upgrade your WebGrab+Plus version to V2.0 or higher!! @http://www.webgrabplus.com/download Not sure if I'm going to update it anymore. I did move it to a linuxserver baseimage, but don't remember if I used version 2.0. I'll check in the weekend and try to get some time to work on it so it's released. Quote Link to comment
Maniac Posted February 23, 2018 Share Posted February 23, 2018 @saarg You seem to be the only one with a working version of Webgrab+ , any chance to get it updated to the latest version? Thanks Quote Link to comment
saarg Posted February 23, 2018 Author Share Posted February 23, 2018 4 minutes ago, Maniac said: @saarg You seem to be the only one with a working version of Webgrab+ , any chance to get it updated to the latest version? Thanks Yes, use the Linuxserver version Quote Link to comment
Maniac Posted February 23, 2018 Share Posted February 23, 2018 Yeah, trying for hours, cant get it to work. While this, outdated version, started right up Quote Link to comment
saarg Posted February 23, 2018 Author Share Posted February 23, 2018 1 minute ago, Maniac said: Yeah, trying for hours, cant get it to work. While this, outdated version, started right up As I said in the linuxserver thread, you need to read the github readme how to configure the grab. It doesn't run on start. Quote Link to comment
stormense Posted March 3, 2019 Share Posted March 3, 2019 I-m stupide! I don't now how to learn webgrabber++ to download the xml.gz I get from a url from my provider. This don't help: Quote XMLTV - XMLTV is a file format that can be read by many EPG viewers. This is also the format WebGrab+Plus uses to output its data. It is the only output you get. After WebGrab+Plus has generated this file, the file can be used as an import file for your own EPG view Quote Link to comment
saarg Posted March 3, 2019 Author Share Posted March 3, 2019 (edited) 30 minutes ago, stormense said: I-m stupide! I don't now how to learn webgrabber++ to download the xml.gz I get from a url from my provider. This don't help: Don't know if it works for your use, but check http://www.webgrabplus.com/ for info. And if it works, you should move to the linuxserver one, as I don't update this anymore. Edited March 3, 2019 by saarg Quote Link to comment
stormense Posted March 6, 2019 Share Posted March 6, 2019 On 3/3/2019 at 1:12 PM, saarg said: Don't know if it works for your use, but check http://www.webgrabplus.com/ for info. And if it works, you should move to the linuxserver one, as I don't update this anymore. Works well on linuxservers docker, tank You. for taking time to answer. Webgrabplus was easy to manage. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.