Jump to content
Capt.Insano

Release: Folding@Home Docker

113 posts in this topic Last Reply

Recommended Posts

Just installed this docker and am getting the same thing - windows client is working just find on my 3 win 10 machines - they are getting out to the server

 

WUI is not loading as well

 

Ideas?

 

Myk

 

Change the number of CPUs assigned to your folding slot.  I found a mention of this issue on the folding forum https://foldingforum.org/viewtopic.php?f=18&t=28863

 

I haven't been able to access the web UI but I can connect through the os x controller app.  I feel like the default settings should work on my network but I still can't connect.

 

...This is my first post I think. I'm running 2xIntel Xeon E5-2670 @ 2.60GHz on an ASRock EP2C602-4L/D16.

 

 

Share this post


Link to post

Just installed this docker and am getting the same thing - windows client is working just find on my 3 win 10 machines - they are getting out to the server

 

WUI is not loading as well

 

Ideas?

 

Myk

 

Change the number of CPUs assigned to your folding slot.  I found a mention of this issue on the folding forum https://foldingforum.org/viewtopic.php?f=18&t=28863

 

I haven't been able to access the web UI but I can connect through the os x controller app.  I feel like the default settings should work on my network but I still can't connect.

 

...This is my first post I think. I'm running 2xIntel Xeon E5-2670 @ 2.60GHz on an ASRock EP2C602-4L/D16.

 

This worked perfectly, thanks!

 

Was getting the error: Failed to get assignment from '171.67.108.45:8080': Empty work server assignment and it wasn't working, went through the document and added the following:

 

<cpus v="1"/>

 

Under the CPU Use section. I'm not sure why it matters when it already detects the number of cores but it works! :D

Share this post


Link to post

Just installed this docker and am getting the same thing - windows client is working just find on my 3 win 10 machines - they are getting out to the server

 

WUI is not loading as well

 

Ideas?

 

Myk

 

Change the number of CPUs assigned to your folding slot.  I found a mention of this issue on the folding forum https://foldingforum.org/viewtopic.php?f=18&t=28863

 

I haven't been able to access the web UI but I can connect through the os x controller app.  I feel like the default settings should work on my network but I still can't connect.

 

...This is my first post I think. I'm running 2xIntel Xeon E5-2670 @ 2.60GHz on an ASRock EP2C602-4L/D16.

 

This worked perfectly, thanks!

 

Was getting the error: Failed to get assignment from '171.67.108.45:8080': Empty work server assignment and it wasn't working, went through the document and added the following:

 

<cpus v="1"/>

 

Under the CPU Use section. I'm not sure why it matters when it already detects the number of cores but it works! :D

 

Fixed the problem for me to.

 

I simply pasted <cpus v="1"/> as a new line in my config.xml, restarted the docker, and it worked.

 

Thanks!

 

Share this post


Link to post

Just installed this docker and am getting the same thing - windows client is working just find on my 3 win 10 machines - they are getting out to the server

 

WUI is not loading as well

 

Ideas?

 

Myk

 

Change the number of CPUs assigned to your folding slot.  I found a mention of this issue on the folding forum https://foldingforum.org/viewtopic.php?f=18&t=28863

 

I haven't been able to access the web UI but I can connect through the os x controller app.  I feel like the default settings should work on my network but I still can't connect.

 

...This is my first post I think. I'm running 2xIntel Xeon E5-2670 @ 2.60GHz on an ASRock EP2C602-4L/D16.

 

This worked perfectly, thanks!

 

Was getting the error: Failed to get assignment from '171.67.108.45:8080': Empty work server assignment and it wasn't working, went through the document and added the following:

 

<cpus v="1"/>

 

Under the CPU Use section. I'm not sure why it matters when it already detects the number of cores but it works! :D

 

Fixed the problem for me to.

 

I simply pasted <cpus v="1"/> as a new line in my config.xml, restarted the docker, and it worked.

 

Thanks!

 

 

Now if I could just get the windows config program to connect to it - it sees it - but can never connect.

 

Have you been able to connect to it?

 

Myk

 

Share this post


Link to post

How do I add more CPU cores? 

 

I've got 8 cores and want to use 4 of them, so tried typing: <cpus v='4'/>,  but also tried: <cpus v='0,3,4,7'/>, and set the folding power to full, but it never maxes all the cores chosen, only one core is at 100% at any time.

 

 

Skærmbillede 2017-05-21 kl. 10.07.51.png

Skærmbillede 2017-05-21 kl. 10.08.05.png

Share this post


Link to post

I'm not sure why or what your changing in the config.xml?

"<cpus v='4'/>,  but also tried: <cpus v='0,3,4,7'/> " ? is this a config modification

I limit resources with Docker "Extra Parameters"

Here is mine. "--cpuset-cpus=1  --cpu-shares=2  --cpu-period=100000 --cpu-quota=30000  --cap-add=SYS_NICE  --memory="256m"  --memory-swap="384m"   --log-opt max-size=50m --log-opt max-file=1".

 

--cpuset-cpus=1  [ sets number of cpus ]

--cpu-shares=2  [ sets weighted priority of container ]

--cpu-period=100000 --cpu-quota=30000  [ limits cpu max usage. this is 30% ]

--memory="256m"  --memory-swap="384m"  [ limits memory usage ]

--log-opt max-size=50m --log-opt max-file=1"  [ controls log file size ]

 

Here is a good  reference. https://docs.docker.com/engine/reference/run/

I'm no expert but hopefully this helps some using this container.

 

Edited by spazmc

Share this post


Link to post

Not always.

The phone app connects every time though.

You can thy a different browser.

Just connected to mine.

Used firefox.  

I think my router or browser has something to do with this.

Used to connect to server @ 192.168.1.**:7396

Now changed to (server:7396)

Chrome based browsers block everything (Midori)

Sometimes I reboot this docker and then connect with firefox.

Hope that helps.

Edited by spazmc
added info

Share this post


Link to post

I notice that the stats area at the top right hand corner of the GUI never gets beyond saying Loading... nowadays. Does the link need to be updated?

 

1643130537_ScreenShot2018-09-01at00_22_42.png.5c127fc65cb13a74820b54201ccefacf.png

Share this post


Link to post

I believe the client needs updating because it isn't able to process core_a7 work units:

01:24:13:WU00:FS00:Starting
01:24:13:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 19 -checkpoint 15 -np 16
01:24:13:WU00:FS00:Started FahCore on PID 54
01:24:13:WU00:FS00:Core PID:58
01:24:13:WU00:FS00:FahCore 0xa7 started
[93m01:24:14:WARNING:WU00:FS00:FahCore returned: FAILED_2 (1 = 0x1)[0m

while the older core_a4 WUs are getting fewer and further between but when they do arrive they work fine:

01:27:55:WU01:FS00:0xa4:Completed 2500 out of 250000 steps (1%)
01:28:23:WU01:FS00:0xa4:Completed 5000 out of 250000 steps (2%)
01:28:54:WU01:FS00:0xa4:Completed 7500 out of 250000 steps (3%)

 

Share this post


Link to post
Quote

*********************** Log Started 2018-11-01T23:49:34Z ***********************
23:49:34:************************* Folding@home Client *************************
23:49:34:    Website: http://folding.stanford.edu/
23:49:34:  Copyright: (c) 2009-2014 Stanford University
23:49:34:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
23:49:34:       Args: --config /config/config.xml
23:49:34:     Config: /config/config.xml
23:49:34:******************************** Build ********************************
23:49:34:    Version: 7.4.4
23:49:34:       Date: Mar 4 2014
23:49:34:       Time: 12:02:38
23:49:34:    SVN Rev: 4130
23:49:34:     Branch: fah/trunk/client
23:49:34:   Compiler: GNU 4.4.7
23:49:34:    Options: -std=gnu++98 -O3 -funroll-loops -mfpmath=sse -ffast-math
23:49:34:             -fno-unsafe-math-optimizations -msse2
23:49:34:   Platform: linux2 3.2.0-1-amd64
23:49:34:       Bits: 64
23:49:34:       Mode: Release
23:49:34:******************************* System ********************************
23:49:34:        CPU: AMD Ryzen Threadripper 1950X 16-Core Processor
23:49:34:     CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
23:49:34:       CPUs: 32
23:49:34:     Memory: 31.28GiB
23:49:34:Free Memory: 322.00MiB
23:49:34:    Threads: POSIX_THREADS
23:49:34: OS Version: 4.18
23:49:34:Has Battery: false
23:49:34: On Battery: false
23:49:34: UTC Offset: -7
23:49:34:        PID: 23
23:49:34:        CWD: /config
23:49:34:         OS: Linux 4.18.10-unRAID x86_64
23:49:34:    OS Arch: AMD64
23:49:34:       GPUs: 2
23:49:34:      GPU 0: UNSUPPORTED: [FireMV 2250]
23:49:34:      GPU 1: UNSUPPORTED: [FireMV 2250] (Secondary)
23:49:34:       CUDA: Not detected
23:49:34:***********************************************************************
23:49:34:<config>
23:49:34:  <!-- Client Control -->
23:49:34:  <fold-anon v='true'/>
23:49:34:
23:49:34:  <!-- Folding Slot Configuration -->
23:49:34:  <gpu v='false'/>
23:49:34:
23:49:34:  <!-- HTTP Server -->
23:49:34:  <allow v='10.0.8.8/16'/>
23:49:34:
23:49:34:  <!-- Network -->
23:49:34:  <proxy v=':8080'/>
23:49:34:
23:49:34:  <!-- Remote Command Server -->
23:49:34:  <password v='********'/>
23:49:34:
23:49:34:  <!-- Slot Control -->
23:49:34:  <power v='full'/>
23:49:34:
23:49:34:  <!-- User Information -->
23:49:34:  <passkey v='********************************'/>
23:49:34:  <team v='223518'/>
23:49:34:  <user v='cturtle98'/>
23:49:34:
23:49:34:  <!-- Web Server -->
23:49:34:  <web-allow v='10.0.8.8/16'/>
23:49:34:
23:49:34:  <!-- Folding Slots -->
23:49:34:  <slot id='0' type='CPU'>
23:49:34:    <cpus v='4'/>
23:49:34:  </slot>
23:49:34:</config>
23:49:34:Trying to access database...
23:49:34:Successfully acquired database lock
23:49:34:Enabled folding slot 00: READY cpu:4
23:49:34:WU00:FS00:Starting
23:49:34:WARNING:WU00:FS00:Changed SMP threads from 32 to 4 this can cause some work units to fail
23:49:34:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 23 -checkpoint 15 -np 4
23:49:34:WU00:FS00:Started FahCore on PID 35
23:49:34:WU00:FS00:Core PID:39
23:49:34:WU00:FS00:FahCore 0xa7 started
23:49:35:WARNING:WU00:FS00:FahCore returned: FAILED_2 (1 = 0x1)
23:49:35:WARNING:WU00:FS00:Too many errors, failing
23:49:35:WU00:FS00:Sending unit results: id:00 state:SEND error:FAILED project:14101 run:16 clone:3 gen:10 core:0xa7 unit:0x000000110002894b5b7da3c972cdcc94
23:49:35:WU00:FS00:Connecting to 155.247.166.219:8080
23:49:35:WU01:FS00:Connecting to 65.254.110.245:8080
23:49:36:WU00:FS00:Server responded WORK_ACK (400)
23:49:36:WU00:FS00:Cleaning up
23:49:36:WU01:FS00:Assigned to work server 128.252.203.2
23:49:36:WU01:FS00:Requesting new work unit for slot 00: READY cpu:4 from 128.252.203.2
23:49:36:WU01:FS00:Connecting to 128.252.203.2:8080
23:49:37:WU01:FS00:Downloading 4.47MiB
23:49:38:WU01:FS00:Download complete
23:49:38:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:13811 run:0 clone:31 gen:335 core:0xa7 unit:0x0000019080fccb025a9818160aef9f17
23:49:38:WU01:FS00:Starting
23:49:38:WU01:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 01 -suffix 01 -version 704 -lifeline 23 -checkpoint 15 -np 4
23:49:38:WU01:FS00:Started FahCore on PID 40
23:49:38:WU01:FS00:Core PID:44
23:49:38:WU01:FS00:FahCore 0xa7 started
23:49:38:WARNING:WU01:FS00:FahCore returned: FAILED_2 (1 = 0x1)
23:49:39:WU01:FS00:Starting
23:49:39:WU01:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 01 -suffix 01 -version 704 -lifeline 23 -checkpoint 15 -np 4
23:49:39:WU01:FS00:Started FahCore on PID 46
23:49:39:WU01:FS00:Core PID:50
23:49:39:WU01:FS00:FahCore 0xa7 started
23:49:39:WARNING:WU01:FS00:FahCore returned: FAILED_2 (1 = 0x1)
 

my docker cpu usage is 0.3% and this is my log

 

any idea what im doing wrong?

Share this post


Link to post
On 9/1/2018 at 7:18 PM, John_M said:

I believe the client needs updating because it isn't able to process core_a7 work units:


01:24:13:WU00:FS00:Starting
01:24:13:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 19 -checkpoint 15 -np 16
01:24:13:WU00:FS00:Started FahCore on PID 54
01:24:13:WU00:FS00:Core PID:58
01:24:13:WU00:FS00:FahCore 0xa7 started
[93m01:24:14:WARNING:WU00:FS00:FahCore returned: FAILED_2 (1 = 0x1)[0m

while the older core_a4 WUs are getting fewer and further between but when they do arrive they work fine:


01:27:55:WU01:FS00:0xa4:Completed 2500 out of 250000 steps (1%)
01:28:23:WU01:FS00:0xa4:Completed 5000 out of 250000 steps (2%)
01:28:54:WU01:FS00:0xa4:Completed 7500 out of 250000 steps (3%)

 

https://foldingathome.org/support/faq/installation-guides/linux/manual-installation-advanced/

https://hub.docker.com/r/captinsano/foldingathome/~/dockerfile/

 

both version 7.4.4 so I think its up to date

Share this post


Link to post
25 minutes ago, cTurtle98 said:

I believe the client needs updating because it isn't able to process core_a7 work units:

That's a shame.  Probably best course of action though is to deprecate this application (it isn't even the 64 bit executable, so much slower than it should be) and hope to hell that @CHBMB et al feel generous one day and pop out a replacement over their morning coffee one day and help the world one day become a better place.

Edited by dockerPolice

Share this post


Link to post

Anyone have ideas what could be causing this some days it will start but if I leave it going it crashes and goes into a state of the ui flickering

 

homenas-diagnostics-20181118-1113.zip

 

 

16:09:30:WU00:FS00:Starting
16:09:30:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 21 -checkpoint 15 -np 8
16:09:30:WU00:FS00:Started FahCore on PID 619
16:09:30:WU00:FS00:Core PID:623
16:09:30:WU00:FS00:FahCore 0xa7 started
[93m16:09:31:WARNING:WU00:FS00:FahCore returned: FAILED_2 (1 = 0x1)[0m

image.thumb.png.bdfad83da291ed1c05b905aa117470b7.png

 

Share this post


Link to post
2 minutes ago, mrbilky said:

16:09:30:WU00:FS00:FahCore 0xa7 started

 

On 11/1/2018 at 7:54 PM, cTurtle98 said:

I believe the client needs updating because it isn't able to process core_a7 work units:

 

On 11/1/2018 at 7:54 PM, cTurtle98 said:

while the older core_a4 WUs are getting fewer and further between but when they do arrive they work fine:

 

3 minutes ago, mrbilky said:

state of the ui flickering

Issue in the client.  If the WU isn't compatible, then the UI does the flicker thing.  The Windows version also does the exact same thing if the WU that it wants to run on your GPU isn't compatible.

Share this post


Link to post

I tried restricting the disease being researched, first to Alzheimer's then to Cancer, in the hope that one or other of them had a higher proportion of core_a4 WUs to offer but over a couple of weeks it didn't work any better than when Any disease was selected. If there isn't going to be an update I'll probably retire from the project - it just doesn't seem fair to request work units and then discard them.

Share this post


Link to post

So with the recent release of this: 

 

https://forums.unraid.net/topic/77813-plugin-linuxserverio-unraid-nvidia/

 

I've gotten the unRaid Plex container to work with my K2200 for decoding without issue.  

 

So I decided to add the same container modifications to this folding container, modify my config file, add the GPU slot and check the logs.

image.thumb.png.f085bbf786c50c7bc686accf2cb96f8c.png

 

Everything seemed excellent at first.  After adding the GPU slot and starting up the client, the GPU count was detected and the name string of the card came back just fine.

 

*********************** Log Started 2019-02-25T07:07:05Z ***********************
07:07:05:************************* Folding@home Client *************************
07:07:05:    Website: http://folding.stanford.edu/
07:07:05:  Copyright: (c) 2009-2014 Stanford University
07:07:05:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
07:07:05:       Args: --config /config/config.xml
07:07:05:     Config: /config/config.xml
07:07:05:******************************** Build ********************************
07:07:05:    Version: 7.4.4
07:07:05:       Date: Mar 4 2014
07:07:05:       Time: 12:02:38
07:07:05:    SVN Rev: 4130
07:07:05:     Branch: fah/trunk/client
07:07:05:   Compiler: GNU 4.4.7
07:07:05:    Options: -std=gnu++98 -O3 -funroll-loops -mfpmath=sse -ffast-math
07:07:05:             -fno-unsafe-math-optimizations -msse2
07:07:05:   Platform: linux2 3.2.0-1-amd64
07:07:05:       Bits: 64
07:07:05:       Mode: Release
07:07:05:******************************* System ********************************
07:07:05:        CPU: Intel(R) Xeon(R) CPU E5-2448L v2 @ 1.80GHz
07:07:05:     CPU ID: GenuineIntel Family 6 Model 62 Stepping 4
07:07:05:       CPUs: 20
07:07:05:     Memory: 31.43GiB
07:07:05:Free Memory: 379.02MiB
07:07:05:    Threads: POSIX_THREADS
07:07:05: OS Version: 4.18
07:07:05:Has Battery: false
07:07:05: On Battery: false
07:07:05: UTC Offset: -6
07:07:05:        PID: 21
07:07:05:        CWD: /config
07:07:05:         OS: Linux 4.18.20-unRAID x86_64
07:07:05:    OS Arch: AMD64
07:07:05:       GPUs: 1
07:07:05:      GPU 0: NVIDIA:4 GM107 [Quadro K2200]
07:07:05:       CUDA: 5.0
07:07:05:CUDA Driver: 10000
07:07:05:***********************************************************************
----removed config for space considerations----
07:07:05:  <!-- Folding Slots -->
07:07:05:  <slot id='0' type='CPU'>
07:07:05:    <paused v='true'/>
07:07:05:  </slot>
07:07:05:  <slot id='1' type='GPU'/>
07:07:05:</config>
07:07:05:Trying to access database...
07:07:05:Successfully acquired database lock
07:07:05:Enabled folding slot 00: PAUSED cpu:19 (by user)
07:07:05:Enabled folding slot 01: READY gpu:0:GM107 [Quadro K2200]
07:07:05:WU00:FS01:Starting
07:07:05:WU00:FS01:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21 -dir 00 -suffix 01 -version 704 -lifeline 21 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
07:07:05:WU00:FS01:Started FahCore on PID 36
07:07:05:WU00:FS01:Core PID:40
07:07:05:WU00:FS01:FahCore 0x21 started
\x1b[93m07:07:06:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (127 = 0x7f)\x1b[0m
07:07:06:WU00:FS01:Starting
07:07:06:WU00:FS01:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21 -dir 00 -suffix 01 -version 704 -lifeline 21 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
07:07:06:WU00:FS01:Started FahCore on PID 41
07:07:06:WU00:FS01:Core PID:45
07:07:06:WU00:FS01:FahCore 0x21 started
\x1b[93m07:07:06:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (127 = 0x7f)\x1b[0m

As you can see, I keep getting this "UNKNOWN_ENUM (127 = 0x7f) error when attempting to run the GPU folding slot.  Was wondering if anyone else here had tried this?  I was previously passing this same K2200 quadro through to windows VM and folding via the windows client on it.  While that worked, it was not 'ideal' and I would much rather pass the hardware to this container and fold without the overhead of a full windows VM.

Share this post


Link to post

Not sure if it helps or not, but I've recently spent some time looking for this error message and came across one other linux user who reported that running nvidia-xconfig had to be done in his ubuntu install when using repository drivers.

 

https://bbs.archlinux.org/viewtopic.php?id=170260

Quote

Solved

 

It's necessary execute "nvidia-xconfig". Without it, it's like "no driver" registred, and folding at home won't find way to work with gpu

thanks

So I've attempted to execute this string from the console within the container, and the command is not found.  No problem.  Backed out to the unraid server itself and executed this command and hit this gem:

 

root@Mediaserver:~# nvidia-xconfig

WARNING: Unable to locate/open X configuration file.


WARNING: Unable to parse X.Org version string.

sh: pkg-config: command not found
New X configuration file written to '/etc/X11/XF86Config'

root@Mediaserver:~#

So... no luck with that either. 

 

Share this post


Link to post

always getting this error in the log:

22:58:58:WU00:FS00:Starting
22:58:58:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 21 -checkpoint 15 -np 4
22:58:58:WU00:FS00:Started FahCore on PID 110
22:58:58:WU00:FS00:Core PID:114
22:58:58:WU00:FS00:FahCore 0xa7 started
�[93m22:58:59:WARNING:WU00:FS00:FahCore returned: FAILED_2 (1 = 0x1)�[0m

seems like its the workunit problem. could an update of the docker fix this?

Share this post


Link to post
53 minutes ago, Knopfdruckoffizier said:

seems like its the workunit problem.

Probably.  But I wouldn't expect an update to the container anytime soon to handle the a7 WUs.  It'll still work when it receives an a4

Share this post


Link to post
Posted (edited)

I'm fairly certain the work unit issues with captinsano's fah docker container is the result of an old phusion image base. I forked the project on github, updated the dockerfile to include a more recent phusion base, built it on dockerhub, and was able to handle a4's and a7's.

Edited by MobiusNine

Share this post


Link to post
2 hours ago, MobiusNine said:

I'm fairly certain the work unit issues with captinsano's fah docker container is the result of an old phusion image base. I forked the project on github, updated the dockerfile to include a more recent phusion base, built it on dockerhub, and was able to handle a4's and a7's.

feel free to publish it then here

Share this post


Link to post
27 minutes ago, Squid said:

feel free to publish it then here 

How would I go about doing that? I've tried to figure out how to publish a docker without success so far. Would you be able to point me in the right direction?

Share this post


Link to post
Posted (edited)

Here's my repository. the updated FoldingAtHome is the only template in it. https://github.com/MobiusNine/docker-templates

 

 

It starts an a7 unit without issue.

 

07:15:49:WU00:FS00:Starting
07:15:49:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 28 -checkpoint 15 -np 16
07:15:49:WU00:FS00:Started FahCore on PID 37
07:15:49:WU00:FS00:Core PID:41
07:15:49:WU00:FS00:FahCore 0xa7 started
07:15:49:FS00:Unpaused
07:15:49:WU00:FS00:Starting
07:15:49:WU00:FS00:Running FahCore: /opt/fah/usr/bin/FAHCoreWrapper /config/cores/cores.foldingathome.org/Linux/AMD64/AVX/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 704 -lifeline 28 -checkpoint 15 -np 16
07:15:49:WU00:FS00:Started FahCore on PID 37
07:15:49:WU00:FS00:Core PID:41
07:15:49:WU00:FS00:FahCore 0xa7 started
07:15:49:WU00:FS00:0xa7:*********************** Log Started 2019-03-15T07:15:49Z ***********************
07:15:49:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
07:15:49:WU00:FS00:0xa7: Type: 0xa7
07:15:49:WU00:FS00:0xa7: Core: Gromacs
07:15:49:WU00:FS00:0xa7: Website: https://foldingathome.org/
07:15:49:WU00:FS00:0xa7: Copyright: (c) 2009-2018 foldingathome.org
07:15:49:WU00:FS00:0xa7: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
07:15:49:WU00:FS00:0xa7: Args: -dir 00 -suffix 01 -version 704 -lifeline 37 -checkpoint 15 -np 16
07:15:49:WU00:FS00:0xa7: Config: <none>
07:15:49:WU00:FS00:0xa7:************************************ Build *************************************
07:15:49:WU00:FS00:0xa7: Version: 0.0.17
07:15:49:WU00:FS00:0xa7: Date: Apr 27 2018
07:15:49:WU00:FS00:0xa7: Time: 19:09:21
07:15:49:WU00:FS00:0xa7: Repository: Git
07:15:49:WU00:FS00:0xa7: Revision: 21359963583d09ec2063ef946399441c4df4ccd7
07:15:49:WU00:FS00:0xa7: Branch: master
07:15:49:WU00:FS00:0xa7: Compiler: GNU 6.3.0 20170516
07:15:49:WU00:FS00:0xa7: Options: -std=gnu++98 -O3 -funroll-loops
07:15:49:WU00:FS00:0xa7: Platform: linux2 4.14.0-3-amd64
07:15:49:WU00:FS00:0xa7: Bits: 64
07:15:49:WU00:FS00:0xa7: Mode: Release
07:15:49:WU00:FS00:0xa7: SIMD: avx_256
07:15:49:WU00:FS00:0xa7:************************************ System ************************************
07:15:49:WU00:FS00:0xa7: CPU: Intel(R) Xeon(R) CPU E5-2667 v2 @ 3.30GHz
07:15:49:WU00:FS00:0xa7: CPU ID: GenuineIntel Family 6 Model 62 Stepping 4
07:15:49:WU00:FS00:0xa7: CPUs: 32
07:15:49:WU00:FS00:0xa7: Memory: 62.94GiB
07:15:49:WU00:FS00:0xa7:Free Memory: 981.30MiB
07:15:49:WU00:FS00:0xa7: Threads: POSIX_THREADS
07:15:49:WU00:FS00:0xa7: OS Version: 4.19
07:15:49:WU00:FS00:0xa7:Has Battery: false
07:15:49:WU00:FS00:0xa7: On Battery: false
07:15:49:WU00:FS00:0xa7: UTC Offset: 0
07:15:49:WU00:FS00:0xa7: PID: 41
07:15:49:WU00:FS00:0xa7: CWD: /config/work
07:15:49:WU00:FS00:0xa7: OS: Linux 4.19.23-Unraid x86_64
07:15:49:WU00:FS00:0xa7: OS Arch: AMD64
07:15:49:WU00:FS00:0xa7:********************************************************************************
07:15:49:WU00:FS00:0xa7:Project: 13818 (Run 65, Clone 1, Gen 0)
07:15:49:WU00:FS00:0xa7:Unit: 0x0000000180fccb095c70623aa7181a41
07:15:49:WU00:FS00:0xa7:Digital signatures verified
07:15:49:WU00:FS00:0xa7:Calling: mdrun -s frame0.tpr -o frame0.trr -x frame0.xtc -cpi state.cpt -cpt 15 -nt 16
07:15:49:WU00:FS00:0xa7:Steps: first=0 total=250000
07:15:51:WU00:FS00:0xa7:Completed 2170 out of 250000 steps (0%)
07:15:51:WU00:FS00:0xa7:Completed 2170 out of 250000 steps (0%)
07:16:00:WU00:FS00:0xa7:Completed 2500 out of 250000 steps (1%)
07:16:00:WU00:FS00:0xa7:Completed 2500 out of 250000 steps (1%)
 

Edited by MobiusNine
I'm adding some of the log of the docker calculating a cpu work unit.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now