kamhighway Posted January 28, 2018 Share Posted January 28, 2018 (edited) I am having trouble getting the plugin to remember changes made from the Wake On Lan tab. Here's what I do: 1. Click on "new" button 2. New line shows up with hostname "New", IP Address 192.168.X.XXX, Mac Address XX:XX:XX:XX:XX:XX. It is always the same IP Address and Mac Address. 3. I edit the hostname, IP Address, and Mac Address 4. Status changes to green 5. Click on "Done" whereupon I get sent back to Unraid's Setting tab 6. If I click on Wake On Lan in the Settings Tab, I go back to the Wake On Lan tab of this plugin. The Hostname, IP, and Mac address have all reverted back to what they were in step 2 I have examined wakeonlan.xml and find that the new host does not get saved to the file. If I edit the file to put the new host in manually, it does not show up as a host in the plugins Wake On Lan tab. I am on Unraid 6.3.5. Does this plugin require 6.4? Update: After about an hour, the edits I made to wakeonlan.xml were reflected in the plugin as I had hoped. There must be a cache somewhere that takes a while to update. I had rebooted Unraid hoping that would make the cache read the edited wakeonlan.xml, but that did not work. Waiting an hour did work. Edited January 28, 2018 by kamhighway Quote Link to comment
dmacias Posted February 3, 2018 Author Share Posted February 3, 2018 On 1/28/2018 at 12:18 PM, kamhighway said: I am having trouble getting the plugin to remember changes made from the Wake On Lan tab. Here's what I do: 1. Click on "new" button 2. New line shows up with hostname "New", IP Address 192.168.X.XXX, Mac Address XX:XX:XX:XX:XX:XX. It is always the same IP Address and Mac Address. 3. I edit the hostname, IP Address, and Mac Address 4. Status changes to green 5. Click on "Done" whereupon I get sent back to Unraid's Setting tab 6. If I click on Wake On Lan in the Settings Tab, I go back to the Wake On Lan tab of this plugin. The Hostname, IP, and Mac address have all reverted back to what they were in step 2 I have examined wakeonlan.xml and find that the new host does not get saved to the file. If I edit the file to put the new host in manually, it does not show up as a host in the plugins Wake On Lan tab. I am on Unraid 6.3.5. Does this plugin require 6.4? Update: After about an hour, the edits I made to wakeonlan.xml were reflected in the plugin as I had hoped. There must be a cache somewhere that takes a while to update. I had rebooted Unraid hoping that would make the cache read the edited wakeonlan.xml, but that did not work. Waiting an hour did work. I was able to reproduce this. CTRL-F5 or F5 was able to fix it. I'll look into it. Quote Link to comment
kamhighway Posted February 3, 2018 Share Posted February 3, 2018 Thanks for taking a look. I appreciate it. Quote Link to comment
dmacias Posted February 12, 2018 Author Share Posted February 12, 2018 Should be fixed. I turn of cache. Quote Link to comment
kamhighway Posted February 13, 2018 Share Posted February 13, 2018 Its working now. Thank you. Quote Link to comment
strike Posted May 11, 2019 Share Posted May 11, 2019 (edited) Is this plugin gonna be updated to work with 6.7? Just updated and etherwake doesn't work anymore. Nevermind.. I just remembered that I had a power outage this week, and for some reason, I need to power on the backup server manually one time before it will accept a magic packet. Did that and it works as normal. Edited May 11, 2019 by strike Quote Link to comment
caveum Posted October 15, 2019 Share Posted October 15, 2019 "Wake On Lan" (WOL) wont "Network Scan", NMAP version issue. re: Wakeonlan (2019.01.25) , Unraid 6.7.x, 6.8.rc1 Hadn't needed to touch WOL since Unraid 6.6.7 because it just worked well (thanks). Recently had a need to use WOL's 'Network Scan' to add servers and found that it silently failed to scan. Investigating, found it uses 'nmap' for the scan. 'nmap -V' fails in the Unraid terminal due to missing /lib64/libssl.so.1 & /lib64/libcrypto.so.1 Unraid 6.7.x & 6.8rc now provides /lib64/libssl.so.1.1 & /lib64/libcrypto.so.1.1 Experimenting I creating a softlink between each of the libssl and libcrypto versions. This allowed NMAP (7.50) to work and the 'Network Scan' to function again. Such softlink's would need to be scripted to be applied each boot if continued to be used in this manner. Another plugin, 'Unassigned Devices' also uses NMAP, but ver 7.70. Unraid also loads this version each boot. Since Unraid loads plugins alphabetically the "Wakeonlan" loads next and Unraid overwrites the UD NMAP 7.70 with the WOL NMAP 7.50. Experimenting again, I renamed /config/plugins/wakeonlan.plg to /config/plugins/1wakeonlan.plg for it to load first and rebooted. WOL NMAP 7.50 was loaded first then overwriten by UD NMAP 7.70 as expected. Wakeonlan 'Network Scan' worked with NMAP 7.70 without any softlinks or apparent issues. Please revise "wakeonlan" to load NMAP 7.70 or a later version. The latest NMAP 7.80 was released in Aug 2019. Thank you. Quote Link to comment
dmacias Posted October 15, 2019 Author Share Posted October 15, 2019 "Wake On Lan" (WOL) wont "Network Scan", NMAP version issue. re: Wakeonlan (2019.01.25) , Unraid 6.7.x, 6.8.rc1 Hadn't needed to touch WOL since Unraid 6.6.7 because it just worked well (thanks). Recently had a need to use WOL's 'Network Scan' to add servers and found that it silently failed to scan. Investigating, found it uses 'nmap' for the scan. 'nmap -V' fails in the Unraid terminal due to missing /lib64/libssl.so.1 & /lib64/libcrypto.so.1 Unraid 6.7.x & 6.8rc now provides /lib64/libssl.so.1.1 & /lib64/libcrypto.so.1.1 Experimenting I creating a softlink between each of the libssl and libcrypto versions. This allowed NMAP (7.50) to work and the 'Network Scan' to function again. Such softlink's would need to be scripted to be applied each boot if continued to be used in this manner. Another plugin, 'Unassigned Devices' also uses NMAP, but ver 7.70. Unraid also loads this version each boot. Since Unraid loads plugins alphabetically the "Wakeonlan" loads next and Unraid overwrites the UD NMAP 7.70 with the WOL NMAP 7.50. Experimenting again, I renamed /config/plugins/wakeonlan.plg to /config/plugins/1wakeonlan.plg for it to load first and rebooted. WOL NMAP 7.50 was loaded first then overwriten by UD NMAP 7.70 as expected. Wakeonlan 'Network Scan' worked with NMAP 7.70 without any softlinks or apparent issues. Please revise "wakeonlan" to load NMAP 7.70 or a later version. The latest NMAP 7.80 was released in Aug 2019. Thank you.Thanks for the heads up. I'll add the unassigned version for 6.8 Quote Link to comment
Transient Posted October 21, 2019 Share Posted October 21, 2019 On 10/15/2019 at 10:18 AM, dmacias said: Thanks for the heads up. I'll add the unassigned version for 6.8 I came here to report the same issue. Would it be possible to check if a newer nmap is already installed and only install when an older version is present? Quote Link to comment
dmacias Posted October 21, 2019 Author Share Posted October 21, 2019 2 hours ago, Transient said: I came here to report the same issue. Would it be possible to check if a newer nmap is already installed and only install when an older version is present? No, that would be nice but there's no package manager for Unraid or slackware really. I updated the plugin to use nmap 7.70 for Unraid 6.7+. 1 Quote Link to comment
Transient Posted October 21, 2019 Share Posted October 21, 2019 25 minutes ago, dmacias said: No, that would be nice but there's no package manager for Unraid or slackware really. I updated the plugin to use nmap 7.70 for Unraid 6.7+. That's too bad as I imagine it would make life easier for plugin developers! Anyway, thanks for the update! Quote Link to comment
Crocs Posted November 21, 2019 Share Posted November 21, 2019 I was wondering if there was a way to user this plugin, inside of the user scripts tab. I'm trying to set up a schudled power-on of a machine of mine, and I cant seem to get it to work. Using the plugin, I can power on my machine, but though user scripts, I can't make it work. This is what I've been trying and nothing seems to work. #!/bin/bash etherwake MAC:ADDRESS Thanks in advanced! Quote Link to comment
trurl Posted November 21, 2019 Share Posted November 21, 2019 3 hours ago, Crocs said: I was wondering if there was a way to user this plugin, inside of the user scripts tab. I'm trying to set up a schudled power-on of a machine of mine, and I cant seem to get it to work. Using the plugin, I can power on my machine, but though user scripts, I can't make it work. This is what I've been trying and nothing seems to work. #!/bin/bash etherwake MAC:ADDRESS Thanks in advanced! Maybe I misunderstand you. Do you mean you want the same computer that is asleep to wake up and run a script to wake itself up? Doesn't make much sense does it? Maybe I misunderstand you. Quote Link to comment
strike Posted November 21, 2019 Share Posted November 21, 2019 4 hours ago, Crocs said: I was wondering if there was a way to user this plugin, inside of the user scripts tab. I'm trying to set up a schudled power-on of a machine of mine, and I cant seem to get it to work. Using the plugin, I can power on my machine, but though user scripts, I can't make it work. This is what I've been trying and nothing seems to work. #!/bin/bash etherwake MAC:ADDRESS Thanks in advanced! Try #!/bin/bash etherwake -b MAC:ADDRESS Should get you going Quote Link to comment
trurl Posted November 21, 2019 Share Posted November 21, 2019 11 hours ago, trurl said: I'm trying to set up a schudled power-on of a machine of mine I see I did misunderstand. Need to put my glasses on when reading my phone. Quote Link to comment
RyanBorg Posted December 24, 2019 Share Posted December 24, 2019 WOL Plugin on 6.8 Is broken.. the green icon is showing as a broken image and cant be pressed to WOL a pc... i tried to remove it, reinstall, cleared cache still wont work. Quote Link to comment
dmacias Posted December 24, 2019 Author Share Posted December 24, 2019 WOL Plugin on 6.8 Is broken.. the green icon is showing as a broken image and cant be pressed to WOL a pc... i tried to remove it, reinstall, cleared cache still wont work.They just renamed some of the icons in the gui. Still works for me just the icons missing during checking and not online but devices online show green. I can press the missing icons and it still works. Quote Link to comment
je82 Posted January 10, 2020 Share Posted January 10, 2020 (edited) Hi, I've been using this tool to wake my backup server, command i used: etherwake -D -i bond0 -b 04:d4:c4:49:f3:a1 This has worked fine on my supermicro motherboard when using the internal nic's on the motherboard, but i recently upgraded to an intel x540-t1 10gbit network card and now my backup server won't wake. I've included the new 10gps nic into the bond0 group, i've also tested to do command etherwake -D -i eth2 -b 04:d4:c4:49:f3:a1 but nothing seems to work Etherwake gives no error message though it tells me it was successful, but nothing wakes up! Quote The target station address is 4:d4:c4:49:f3:a1. Packet is ff ff ff ff ff ff 04 d4 c4 49 f3 a1 08 42 ff ff ff ff ff ff 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1. Sendto worked ! 116. Ideas what i could do? Edited January 10, 2020 by je82 Quote Link to comment
dmacias Posted January 11, 2020 Author Share Posted January 11, 2020 Hi, I've been using this tool to wake my backup server, command i used: etherwake -D -i bond0 -b 04:d4:c4:49:f3:a1 This has worked fine on my supermicro motherboard when using the internal nic's on the motherboard, but i recently upgraded to an intel x540-t1 10gbit network card and now my backup server won't wake. I've included the new 10gps nic into the bond0 group, i've also tested to do command etherwake -D -i eth2 -b 04:d4:c4:49:f3:a1 but nothing seems to work Etherwake gives no error message though it tells me it was successful, but nothing wakes up! The target station address is 4:d4:c4:49:f3:a1. Packet is ff ff ff ff ff ff 04 d4 c4 49 f3 a1 08 42 ff ff ff ff ff ff 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1 04 d4 c4 49 f3 a1. Sendto worked ! 116. Ideas what i could do? I came across this "10-Gigabit Ethernet adaptersWake-on-LAN isn't supported on Intel Ethernet 10-gigabit adapters." https://www.intel.com/content/www/us/en/support/articles/000005793/network-and-io/ethernet-products.html wtf?! So it may not transmit it on that adapter. I never used bond as the interface or -b option. Usually etherwake -i br0 mac address. Quote Link to comment
je82 Posted January 11, 2020 Share Posted January 11, 2020 (edited) 3 hours ago, dmacias said: Ideas what i could do? I came across this "10-Gigabit Ethernet adapters Wake-on-LAN isn't supported on Intel Ethernet 10-gigabit adapters." https://www.intel.com/content/www/us/en/support/articles/000005793/network-and-io/ethernet-products.html wtf?! So it may not transmit it on that adapter. I never used bond as the interface or -b option. Usually etherwake -i br0 mac address. Interersting, but does that not only relate to having the actual intel nic wake the system up from sleep? Or is the nic actually not capable of sending a wol packet? I've never heard of such a thing. Shouldn't any nic be capable of crafting such a package but not all nics support actually listening for them when the system is sleeping? I'm no network expert, bond seemed the easiest way to run multiple interfaces as one, i do not know what br0 is. I guess i will have to play around a little bit more, i did add a 10gps switch beteen the server and the backup machine and perhaps the switch is not passing the wol package even though it is currently configured to be just a dumb switch nothing more. I'll have to do some more testing, thanks for the reply! Edited January 11, 2020 by je82 Quote Link to comment
je82 Posted January 11, 2020 Share Posted January 11, 2020 (edited) holy smokes, it was a faulty network cable causing me trouble, and it decided to not work everytime i had my 10gps switch connected... what a weird strange draw of luck, it works fine now. i cannot believe it just randomly decided to not work whenever i had the switch connected, but now when i am jiggling it around a bit i notice it is dropping randomly, anyway... i can send wol fine. im making sure to cut this cable in two, this is a cursed one! Edited January 11, 2020 by je82 Quote Link to comment
nyteghost Posted January 24, 2020 Share Posted January 24, 2020 Just making sure i understand how this works. Does it automatically send a magic packet without you having to interact with it? Quote Link to comment
dmacias Posted January 24, 2020 Author Share Posted January 24, 2020 Just making sure i understand how this works. Does it automatically send a magic packet without you having to interact with it?No it does not. It's just s basic plugin to find and add computers to s list that you can manually wake up. Never added any kind of automation or schedule. It does install etherwake. You can use a script to just run a simple etherwake command. Quote Link to comment
nyteghost Posted January 24, 2020 Share Posted January 24, 2020 13 minutes ago, dmacias said: 23 minutes ago, nyteghost said: Just making sure i understand how this works. Does it automatically send a magic packet without you having to interact with it? No it does not. It's just s basic plugin to find and add computers to s list that you can manually wake up. Never added any kind of automation or schedule. It does install etherwake. You can use a script to just run a simple etherwake command. Okay just making sure. Was looking for a way to remote wake up my other pc. Quote Link to comment
danktankk Posted March 20, 2020 Share Posted March 20, 2020 Granted I am using UNRAID 6.8.3 with UNRAID NVidia, but I am using this plugin and it seems to be working fine, however, there is always this at the bottom of my screen. Any ideas how to get this to go away? Could this be because this plugin isnt supported for my version of unraid? Thanks for any ideas or suggestions. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.