CHBMB Posted December 31, 2015 Share Posted December 31, 2015 Actually, scrap that, sorry. Although the command runs without throwing up an error, the container doesn't remain running. Looking in the unraid webui shows that it's stopped. Quote Link to comment
spants Posted December 31, 2015 Author Share Posted December 31, 2015 I have just pushed a new version to dockerhub which uses the --bind-dynamic feature of DNSMASQ Can you try this? If that fails for you, I will change the pointer from 0.0.0.0 to 127.0.0.1 Again, I'm not sure why it only works on my system! regards Tony Quote Link to comment
CHBMB Posted December 31, 2015 Share Posted December 31, 2015 Tony, That's cracked it.. Running now. Quote Link to comment
beire Posted December 31, 2015 Share Posted December 31, 2015 Just readded the docker. Working fine now. Thx spants ! Quote Link to comment
spants Posted December 31, 2015 Author Share Posted December 31, 2015 Great news! - Thanks guys Quote Link to comment
piotrasd Posted January 1, 2016 Share Posted January 1, 2016 UPDATE: after upgrade to latest version now starting OK ! there is any hope add any logs to unraid-hole there is no possibility enter to container and on unraid webgui dont show any logs Quote Link to comment
spants Posted January 2, 2016 Author Share Posted January 2, 2016 there is any hope add any logs to unraid-hole there is no possibility enter to container and on unraid webgui dont show any logs Sure, I will be working on this Docker and hope to add user-defined block lists and logging to it. The next major release will be in a couple of weeks due to work commitments. Tony Quote Link to comment
CHBMB Posted January 2, 2016 Share Posted January 2, 2016 there is any hope add any logs to unraid-hole there is no possibility enter to container and on unraid webgui dont show any logs Sure, I will be working on this Docker and hope to add user-defined block lists and logging to it. The next major release will be in a couple of weeks due to work commitments. Tony I really like this container but, as we're currently shopping for furniture, blocking googleadservices is a bit of a pain, so some way to edit the lists would be awesome. Quote Link to comment
spants Posted January 10, 2016 Author Share Posted January 10, 2016 I really like this container but, as we're currently shopping for furniture, blocking googleadservices is a bit of a pain, so some way to edit the lists would be awesome. I have removed googleadservices from the block list as a temporary measure. If you can remove and redeploy it should be better for you. Quote Link to comment
CHBMB Posted January 10, 2016 Share Posted January 10, 2016 I really like this container but, as we're currently shopping for furniture, blocking googleadservices is a bit of a pain, so some way to edit the lists would be awesome. I have removed googleadservices from the block list as a temporary measure. That's very good of you, don't know how other users will feel about it but thanks... Quote Link to comment
spants Posted January 10, 2016 Author Share Posted January 10, 2016 I really like this container but, as we're currently shopping for furniture, blocking googleadservices is a bit of a pain, so some way to edit the lists would be awesome. I have removed googleadservices from the block list as a temporary measure. That's very good of you, don't know how other users will feel about it but thanks... It was catching me out with my kitchen build too!. Quote Link to comment
stuart Posted January 12, 2016 Share Posted January 12, 2016 For unraid hole - is there a way to replace the server not found meessage, with a blank page, or perhaps an unraid-hole logo? Quote Link to comment
spants Posted January 13, 2016 Author Share Posted January 13, 2016 It is one of the suggestions that I am looking at .... Tony Quote Link to comment
beire Posted January 24, 2016 Share Posted January 24, 2016 Node-red 0.13 was recently released with a bunch of cool updates. Any chance we can see an update? Quote Link to comment
spants Posted January 24, 2016 Author Share Posted January 24, 2016 Node Red docker has been updated to v0.13.1 today Quote Link to comment
beire Posted January 24, 2016 Share Posted January 24, 2016 Node Red docker has been updated to v0.13.1 today Awesome! Updated fine, thx a lot! Quote Link to comment
cbarnes01 Posted January 24, 2016 Share Posted January 24, 2016 What's the best way to add or update nodes in node red? Quote Link to comment
spants Posted January 25, 2016 Author Share Posted January 25, 2016 On the docker currently you cannot add any extra so I bundled the key additions. If there are any that you would like, please let me know and I will add them. I am looking at having a useraddons file that you can edit and then it will load them after a restart....... Quote Link to comment
beire Posted January 25, 2016 Share Posted January 25, 2016 I've gotten a few very basic nodes working that i've added by just copying them in the data folder. (unraid mapped folder) For example i've added this node (not available through npm): https://github.com/tzapu/node-red-contrib-link I have created a folder "nodes" in my node-red mapped folder. In that folder i now have another folder "node-red-contrib-link-master" containing the node files. Seems to work fine. But certainly only for nodes not having dependencies. *EDIT: did anyone see this new node: http://flows.nodered.org/node/node-red-contrib-admin It seems it allows installing nodes from within node-red. Haven't tested it, but could be cool. Quote Link to comment
spants Posted January 25, 2016 Author Share Posted January 25, 2016 http://flows.nodered.org/node/node-red-contrib-admin It seems it allows installing nodes from within node-red. Haven't tested it, but could be cool. Thanks for the heads-up - I have now added this to the Docker as it should make it simpler to add nodes (as long as you dont wipe the docker as you will need to add those nodes again) Quote Link to comment
beire Posted February 4, 2016 Share Posted February 4, 2016 http://flows.nodered.org/node/node-red-contrib-admin It seems it allows installing nodes from within node-red. Haven't tested it, but could be cool. Thanks for the heads-up - I have now added this to the Docker as it should make it simpler to add nodes (as long as you dont wipe the docker as you will need to add those nodes again) I have finally tested this admin node a bit. Seems to work great AND it seems it adds a node-modules folder in the data directory. So this means the installed nodes are still there after a restart! Quote Link to comment
live4soccer7 Posted February 6, 2016 Share Posted February 6, 2016 Quick question. I've install mqtt and when I run something like like this: mosquitto_sub -d -t hello/world or mosquitto_pub bash: mosquitto_sub: command not found I am in the docker container. I am able to run the following with good results mosquitto -c /config/mosquitto.conf Warning: Default listener port specified multiple times. Only the latest will be used. 1454733095: mosquitto version 1.4.7 (build date Tue, 22 Dec 2015 12:47:28 +0000) starting 1454733095: Config loaded from /config/mosquitto.conf. 1454733095: Opening websockets listen socket on port 9001. What am I missing? I have also navigated to usr/bin/ and was not able to locate the command there. Is the location different from that? I am simply trying to make sure everything is up and running by using this command so I can move on to integrating within openhab. Quote Link to comment
live4soccer7 Posted February 6, 2016 Share Posted February 6, 2016 I have adjusted the .conf file a little and I now have better results when reading it. root@4ca7b725ceaa:/# mosquitto -c /config/mosquitto.conf 1454745023: mosquitto version 1.4.7 (build date Tue, 22 Dec 2015 12:47:28 +0000) starting 1454745023: Config loaded from /config/mosquitto.conf. 1454745023: Opening websockets listen socket on port 9001. I still am unable to run a mosquitto_sub command or really anything besides the mosquitto -c command. Any ideas? Is there something in the .conf file I'm missing? I simply get a command not found return. Quote Link to comment
spants Posted February 8, 2016 Author Share Posted February 8, 2016 you shouldn't need to be in the container, have you seen this post: http://lime-technology.com/forum/index.php?topic=38486.msg410452#msg410452 I have set it up to autostart as a server, I'm not sure if I installed the client code as it wasn't needed. Use an external app (mqtt-spy is great) to talk to the server. It works with openhab etc. remember to use ipaddress:port and not localhost:port! Quote Link to comment
live4soccer7 Posted February 8, 2016 Share Posted February 8, 2016 Thanks. I'm definitely reading through that thread now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.