October 23, 201510 yr Hi - I may be doing something incorrectly, but I am not able to stream h.265 videos (HEVC). Is that something I'm messing up, or something that isn't supported in this version? I saw a thread w/the Air Video HD folk saying it had been supported for a while, so I just wanted to check! Thank you very much - regardless of that I use this almost every day. Love it and recommend it to other friends with unRAID.
December 6, 201510 yr Any chance of a steer with my settings for the Air Video HD docker please? I am unable to add a connection with a server PIN as I get a validation error with every PIN that I recover from the network log file. I am however able to add a connection manually with the servers IP address. I am unable to get the multi user function to work at all and am only able to get any results in single user mode. I have only managed to get the first share to show. Thanks
December 6, 201510 yr From what I can see from your server properties file you need to do some editing to it. I'm no expert by any means as you can see from my earlier post lol. If you look at my server config file you should be able to see what needs doing. The # symbol needs to be added to the single user line and removed from the other shared folder(s) The same needs to happen with your additional users. I believe in Linux having the # symbol means that the "comment" will be ignored. I hope that makes sense as I have said I'm no expert but trying to give a bit back as I've had so much good help on here. Edit to add that I have found that you usually need to restart the container after messing in there or just the link at the top of the server properties file to restart the air video server. It seems to stop the server being seen from the app. Then you can re add it and pop the pin in
December 6, 201510 yr For anybody in the future that experiences the same problem, my server properties are now:
December 10, 201510 yr I've installed Splunk some years ago and didn't encounter an issue with the web login before. I'm getting this error after creating the Splunk container with nearly all default settings aside from IP address and HostPath. This webpage is not available ERR_CONNECTION_REFUSED For IP address in the WebUI its http://192.168.100.129:8000 The HostPath is /mnt/user/appDataXFSOnly/splunk/var/ which as the name suggests is a share forced to exist only on XFS formatted drives since my cache is BTRFS and all other disks that are ReiserFS are full. I've read some comments about BTRFS not supported so I'm avoiding the cache intentionally. I've looked at the contents of the HostPath and there is stuff in there, but its not a lot IMO. I noticed that the permissions are not allowing access beyond the var directory until running the New Permissions from Unraid tools. Not sure if that helps, but it allows the files to be deleted upon container purge and also for viewing, but so far the logs have been pretty lean on anything important. The actual Splunk appserver directory is pretty empty which maybe the actual cause of the problem. This is the full listing of files and directories from a fresh install of Splunk: _____________________________________________________________________________________ PS Microsoft.PowerShell.Core\FileSystem::\\192.168.100.129\AppDataXFSOnly> Get-ChildItem -recurse Directory: \\192.168.100.129\AppDataXFSOnly Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM splunk Directory: \\192.168.100.129\AppDataXFSOnly\splunk Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM var Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM log d---- 12/10/2015 12:23 AM lib d---- 12/10/2015 12:23 AM run d---- 12/10/2015 12:23 AM spool Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\log Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM splunk d---- 12/10/2015 12:23 AM introspection Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\log\splunk Mode LastWriteTime Length Name ---- ------------- ------ ---- ----- 12/10/2015 12:23 AM 70 first_install.log ----- 12/10/2015 12:23 AM 0 btool.log ----- 12/10/2015 12:23 AM 755 splunkd-utility.log Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\lib Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM splunk Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\lib\splunk Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM authDb d---- 12/10/2015 12:23 AM hashDb d---- 12/10/2015 12:23 AM audit Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\lib\splunk\audit Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM db d---- 12/10/2015 12:23 AM colddb d---- 12/10/2015 12:23 AM thaweddb Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\lib\splunk\audit\db Mode LastWriteTime Length Name ---- ------------- ------ ---- ----- 12/10/2015 12:23 AM 0 test.9JyFOO Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\run Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM splunk Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\run\splunk Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM appserver d---- 12/10/2015 12:23 AM upload ----- 12/10/2015 12:23 AM 10937 composite.xml Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\run\splunk\appserver Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM i18n d---- 12/10/2015 12:23 AM modules Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\run\splunk\appserver\modules Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM static Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\run\splunk\appserver\modules\static Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM css Directory: \\192.168.100.129\AppDataXFSOnly\splunk\var\spool Mode LastWriteTime Length Name ---- ------------- ------ ---- d---- 12/10/2015 12:23 AM splunk d---- 12/10/2015 12:23 AM dirmoncache ________________________________________________________________________________________________________________________________________________________________________
January 1, 201610 yr hi all! i had been using the eroz airvideoserver, which worked well for me, however i couldn't get it to work with my new apple tv, it would never connect. eroz suggested that i try airvideohd as it may work... for some reason, when i install airvideohd, i can't get anything to connect. the log files seems to suggest an error with bonjour... any suggestions on how to resolve this? i will attach my logs as well...any help is greatly appreciated! server_prop_and_network_log.zip
January 14, 201610 yr I am trying to add the MQTT APP to Splunk. Is this something that is possible? I am getting a server error. If so, what do I need to do to set this up?
March 2, 201610 yr For anybody in the future that experiences the same problem, my server properties are now: With the fear of sounding like a complete noob; how do you edit that file?
March 4, 201610 yr You will need notepad++ if you are doing this on a Windows pc then just navigate to your appdata folder on your server and then into your air video hd folder and look for the server properties file. Open with notepad++ then edit to your hearts content. Take note of the text at the top that instructs you how to reload airvideo server whilst still running after you have made your edits. https://notepad-plus-plus.org/
March 5, 201610 yr You will need notepad++ if you are doing this on a Windows pc then just navigate to your appdata folder on your server and then into your air video hd folder and look for the server properties file. Open with notepad++ then edit to your hearts content. Take note of the text at the top that instructs you how to reload airvideo server whilst still running after you have made your edits. https://notepad-plus-plus.org/ i'm on OS X, so just opened it on textedit. So obvious , well being new to unRAID seems to makes me overthink things.
March 31, 201610 yr Hello, I am having a strange issue when trying to install the Air Video HD. For some reason the "airvideohd" folder is not being named correctly when the command is run. It names the folder "Air Video HD" and then fails. I can get around this by telneting into the server and manually running the command. but then the container no longer gives me the option to edit the paths to where my video files are located Here is a shot of the config page upon initial configuration. I cannot get this to show up again to change paths. I have tried editing the paths her but it does nothing to update them. Any help would be appreciated
March 31, 201610 yr Hello, I am having a strange issue when trying to install the Air Video HD. For some reason the "airvideohd" folder is not being named correctly when the command is run. It names the folder "Air Video HD" and then fails. I can get around this by telneting into the server and manually running the command. but then the container no longer gives me the option to edit the paths to where my video files are located Here is a shot of the config page upon initial configuration. I cannot get this to show up again to change paths. I have tried editing the paths her but it does nothing to update them. Any help would be appreciated You need to update one of your plug-ins. Once you do that, it should work fine.
March 31, 201610 yr Thank you for you fast response. I only have three plugins and all of them say up to date. Am I missing one or could this be caused by the 6.2.0 beta?
March 31, 201610 yr Thank you for you fast response. I only have three plugins and all of them say up to date. Am I missing one or could this be caused by the 6.2.0 beta? Its not the space in path issue (which isn't present in 6.2beta 20 anyways) What it is is a difference in how dockerMan operates between 6.1.9 and 6.2 *Technically*, the xml template for Air Video HD is incorrect. Spaces are not allowed within the name of the container. dockerMan running on 6.1.x would automatically get rid of the spaces. dockerMan on 6.2 is taking the name as is. Until this gets fixed, just don't include spaces in the name when adding it
March 31, 201610 yr Forgive me if I'm misunderstanding you. Are you saying to change the name in the intial configuration shown here If so, then I've tried that and it still doesn't work. Are you referring to a different location?
July 15, 20169 yr Hi - I may be doing something incorrectly, but I am not able to stream h.265 videos (HEVC). Is that something I'm messing up, or something that isn't supported in this version? I saw a thread w/the Air Video HD folk saying it had been supported for a while, so I just wanted to check! Thank you very much - regardless of that I use this almost every day. Love it and recommend it to other friends with unRAID. Interested if anyone knows about this, I cant play h.265 via Air Video, get a codec error
July 16, 20169 yr Hi - I may be doing something incorrectly, but I am not able to stream h.265 videos (HEVC). Is that something I'm messing up, or something that isn't supported in this version? I saw a thread w/the Air Video HD folk saying it had been supported for a while, so I just wanted to check! Thank you very much - regardless of that I use this almost every day. Love it and recommend it to other friends with unRAID. Interested if anyone knows about this, I cant play h.265 via Air Video, get a codec error I should correct myself - it's just *some* HEVC files I can't play. Some seem to work, but others do not. I don't know where a log file is kept or whatever, but can try and then post here if anyone knows / cares.
July 16, 20169 yr Hi - I may be doing something incorrectly, but I am not able to stream h.265 videos (HEVC). Is that something I'm messing up, or something that isn't supported in this version? I saw a thread w/the Air Video HD folk saying it had been supported for a while, so I just wanted to check! Thank you very much - regardless of that I use this almost every day. Love it and recommend it to other friends with unRAID. Interested if anyone knows about this, I cant play h.265 via Air Video, get a codec error I should correct myself - it's just *some* HEVC files I can't play. Some seem to work, but others do not. I don't know where a log file is kept or whatever, but can try and then post here if anyone knows / cares. I'll test other files. Sent from my iPhone using Tapatalk
July 17, 20169 yr Hi - I may be doing something incorrectly, but I am not able to stream h.265 videos (HEVC). Is that something I'm messing up, or something that isn't supported in this version? I saw a thread w/the Air Video HD folk saying it had been supported for a while, so I just wanted to check! Thank you very much - regardless of that I use this almost every day. Love it and recommend it to other friends with unRAID. Interested if anyone knows about this, I cant play h.265 via Air Video, get a codec error I should correct myself - it's just *some* HEVC files I can't play. Some seem to work, but others do not. I don't know where a log file is kept or whatever, but can try and then post here if anyone knows / cares. I'll test other files. Sent from my iPhone using Tapatalk It says I'm missing the h.265 codec. So none play. Sent from my iPhone using Tapatalk
September 20, 20169 yr Hi! I'm struggling to get Airvideo HD updated within unRAID 6.2 . I get always this error: Pulling image: dmaxwell/airvideohd:latest IMAGE ID [latest]: Pulling from dmaxwell/airvideohd. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [3b1d42cd9af9]: Already exists. IMAGE ID [d2ff49536f4d]: Already exists. IMAGE ID [f94adccdbb9c]: Already exists. IMAGE ID [ae857e8dd13c]: Already exists. IMAGE ID [327565847940]: Already exists. IMAGE ID [16bc62d4cc37]: Pulling fs layer. Downloading 100% of 770 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [b52ef64fd4f3]: Pulling fs layer. Downloading 100% of 204 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [2cd1444ce9e4]: Pulling fs layer. Downloading 100% of 117 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [6690e820bc6b]: Pulling fs layer. Downloading 100% of 22 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [8cd693f391b9]: Pulling fs layer. Downloading 100% of 24 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [cba886bc9116]: Pulling fs layer. Downloading 100% of 673 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [adff3464393f]: Pulling fs layer. Downloading 100% of 233 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [f0bb4bd88798]: Pulling fs layer. Downloading 100% of 876 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [c4e2a176c469]: Pulling fs layer. Downloading 100% of 138 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [4265f9f0fe4a]: Pulling fs layer. Downloading 100% of 272 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [248a150b3ec0]: Pulling fs layer. Downloading 100% of 277 B. Verifying Checksum. Download complete. Extracting. Pull complete. TOTAL DATA PULLED: 162 MB Error: layers from manifest don't match image configuration Am I doing anything wrong? I did a stupid thing, deleting the docker and trying to reinstall it, but now I have missed it
September 20, 20169 yr Hi! I'm struggling to get Airvideo HD updated within unRAID 6.2 . I get always this error: Pulling image: dmaxwell/airvideohd:latest IMAGE ID [latest]: Pulling from dmaxwell/airvideohd. IMAGE ID [a3ed95caeb02]: Already exists. IMAGE ID [3b1d42cd9af9]: Already exists. IMAGE ID [d2ff49536f4d]: Already exists. IMAGE ID [f94adccdbb9c]: Already exists. IMAGE ID [ae857e8dd13c]: Already exists. IMAGE ID [327565847940]: Already exists. IMAGE ID [16bc62d4cc37]: Pulling fs layer. Downloading 100% of 770 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [b52ef64fd4f3]: Pulling fs layer. Downloading 100% of 204 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [2cd1444ce9e4]: Pulling fs layer. Downloading 100% of 117 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [6690e820bc6b]: Pulling fs layer. Downloading 100% of 22 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [8cd693f391b9]: Pulling fs layer. Downloading 100% of 24 MB. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [cba886bc9116]: Pulling fs layer. Downloading 100% of 673 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [adff3464393f]: Pulling fs layer. Downloading 100% of 233 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [f0bb4bd88798]: Pulling fs layer. Downloading 100% of 876 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [c4e2a176c469]: Pulling fs layer. Downloading 100% of 138 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [4265f9f0fe4a]: Pulling fs layer. Downloading 100% of 272 B. Verifying Checksum. Download complete. Extracting. Pull complete. IMAGE ID [248a150b3ec0]: Pulling fs layer. Downloading 100% of 277 B. Verifying Checksum. Download complete. Extracting. Pull complete. TOTAL DATA PULLED: 162 MB Error: layers from manifest don't match image configuration Am I doing anything wrong? I did a stupid thing, deleting the docker and trying to reinstall it, but now I have missed it There's a docker faq about that Sent from my SM-T560NU using Tapatalk
Archived
This topic is now archived and is closed to further replies.