March 5, 201511 yr I'm stumped for the moment. I plugged in my upgraded 5 to 6b14 usb stick to the server and upon booting up I cannot access the web interface. SSH to the specified IP works fine. I'm going to start fresh and not copy over the config directory as a testing step, but it seems odd that the web server would not be accessible. Any ideas?
March 5, 201511 yr Author hmmm. If I run "emhtp" I can get it to show up, but seems odd that it wouldn't be running from the start. (mods- I also just noticed I put this in the 5.x general support, feel free to move it)
March 5, 201511 yr hmmm. If I run "emhtp" I can get it to show up, but seems odd that it wouldn't be running from the start. There should be a line to start it in the default 'go' file. You might want to check that out.
March 5, 201511 yr Author Yeah, it's really odd. It is there, but it's like nothing is being read. There's another oddity I've copied over my previous config and yet there's no indication of it being read. Ok. Whatever, I'll start from scratch. I load my pro key, still comes up as trial. Ok, I must have not done it right since it has to be in the config folder. So, I load my pro key from the gui web url, it registers appropriately. great. I reboot, comes up as trial again. I copy over my .key into flash > config reboot It's gone. Any file I put in there no longer exists. My bad. I thought this upgrade was going to be 'easy' =)
March 5, 201511 yr Sounds like the flash drive may be corrupt. Try running a check on the usb drive using another computer.
March 5, 201511 yr Author Sounds like the flash drive may be corrupt. Try running a check on the usb drive using another computer. Good call on the flash drive. I did a complete format instead of a quick format and reloaded everything. All seems to be working now. Thanks for the lead.
Archived
This topic is now archived and is closed to further replies.