gfjardim Posted June 19, 2015 Author Share Posted June 19, 2015 I think I fixed this, please update and test please. Same error message as before, without the last line. Still unable to login to WebGUI. Found user 'avahi' (UID 105) and group 'avahi' (GID 111). Successfully dropped root privileges. chroot.c: fork() failed: Resource temporarily unavailable failed to start chroot() helper daemon. I'll have to remove avahi from the container and look for another way to make this work. Quote Link to comment
dirtysanchez Posted June 19, 2015 Share Posted June 19, 2015 I'll have to remove avahi from the container and look for another way to make this work. Ok. Thanks very much for your efforts in trying to get this to work. Quote Link to comment
gfjardim Posted June 19, 2015 Author Share Posted June 19, 2015 Hi gfjardim, how do I install drivers into the cups container? I have a Dell 1250c printer which uses the Xerox Phaser 6000b driver for Linux that is not included in cups. I only added support for HP and Samsung printers, those which I have how to test it. I'll try to add Xerox too. Took a look at your printer model, and apparently it's divers are 32bits only. Did you took a look at openprinting.org? Quote Link to comment
gfjardim Posted June 20, 2015 Author Share Posted June 20, 2015 I think I fixed this, please update and test please. Same error message as before, without the last line. Still unable to login to WebGUI. Found user 'avahi' (UID 105) and group 'avahi' (GID 111). Successfully dropped root privileges. chroot.c: fork() failed: Resource temporarily unavailable failed to start chroot() helper daemon. Ok, just remove avahi; now it will export bonjour services using unRAID's avahi service. Because of that, I had to change the template, so you will need to start from an updated version of the template. Quote Link to comment
JM2005 Posted June 20, 2015 Share Posted June 20, 2015 Will this work with Epson printer's? Thanks again for all your hard work! Quote Link to comment
dirtysanchez Posted June 20, 2015 Share Posted June 20, 2015 Removed the existing docker and container. Reloaded from the new template and it's working great with my HP LaserJet 3015. Thanks a million gfjardim! Quote Link to comment
gfjardim Posted June 20, 2015 Author Share Posted June 20, 2015 Will this work with Epson printer's? Thanks again for all your hard work! Do not started to add drivers yet; just installed Samsung and HP drivers because they are universal. If you want to request a driver, please post your printer's model. Quote Link to comment
JM2005 Posted June 20, 2015 Share Posted June 20, 2015 Will this work with Epson printer's? Thanks again for all your hard work! Do not started to add drivers yet; just installed Samsung and HP drivers because they are universal. If you want to request a driver, please post your printer's model. I went to the cups docker admin web page and had it find my Epson 545 printer and then I added it from the list and it works great! Thanks so much for creating this docker!!! Quote Link to comment
Danilo_Thann69 Posted June 20, 2015 Share Posted June 20, 2015 I just upgraded from unraid 5 to 6 tonight. I've loaded the dropbox docker app, but I don't see how to link it to my dropbox account. Can anyone help? Thanks UPDATE: you need to have a variable setup named ACCOUNT with a value of your dropbox email address. Once you do this, go to the logs for your dropbox docker and go to the link listed in there. You'll login and that will link to your account. Not sure why this was so hard for anyone to mention. Would have thought this would be included in the description/setup info. Quote Link to comment
METDeath Posted June 20, 2015 Share Posted June 20, 2015 For the Logitech Media Server docker, is there anyway to add Shairport (Airplay) plug-in support? I like how much more responsive the LMS interface is running on my unRAID box rather on my Pi, and would like to have Airplay capability. https://github.com/StuartUSA/shairport_plugin Quote Link to comment
jamescarlos Posted June 20, 2015 Share Posted June 20, 2015 Awesome, thanks for CUPS! I'd like to request printer drivers for Canon MP560. Quote Link to comment
gfjardim Posted June 20, 2015 Author Share Posted June 20, 2015 Awesome, thanks for CUPS! I'd like to request printer drivers for Canon MP560. I'll try, but some manufacturers have shitty Linux support, like Canon: PIXMA Printers and All-In-Ones, Scanners, i-SENSYS Laser Printers and All-In-Ones, Laser Fax Machines & Personal Copiers Canon currently only provides support for PIXMA products and the Linux operating system by providing basic drivers in a limited amount of languages. These basic drivers may not encompass the full range of functionalities for all printer and all-in-one products but they will allow basic printing and scanning operation. Linux drivers are not supplied as part of Canon’s installation CD-ROM and these are instead made available via our support area. Please select your product and filter the results based on language and operating system. Canon does not offer specific after care support for Linux related issues beyond the provision of the initial drivers. Quote Link to comment
jamescarlos Posted June 20, 2015 Share Posted June 20, 2015 Okay thanks. I've noticed the same thing. I tried myself to install the CUPS cnjinet backend (required to detect canon printers) but have been unsuccessful so far. Any efforts you make are much appreciated. Quote Link to comment
otisk Posted June 20, 2015 Share Posted June 20, 2015 Hi gfjardim, how do I install drivers into the cups container? I have a Dell 1250c printer which uses the Xerox Phaser 6000b driver for Linux that is not included in cups. I only added support for HP and Samsung printers, those which I have how to test it. I'll try to add Xerox too. Took a look at your printer model, and apparently it's divers are 32bits only. Did you took a look at openprinting.org? The driver I downloaded is stated to work on 32 and 64 bit systems. http://www.support.xerox.com/support/phaser-6000/file-download/engb.html?operatingSystem=linux&fileLanguage=en_GB&contentId=116070&from=downloads&viewArchived=false I was able to load the entire driver into the cups docker. My printer is detected correctly and I can select the driver in the cups drivers list. When the printer is set up, it shows no error in the status as it did before. Up to this point everything seems fine. Anyway, whenever I try to print something it says "filter failed" in the status. I haven't been able to find out at which point it fails yet. I found this guide for my printer model: https://wiki.archlinux.org/index.php/Dell_1250c Unfortunately I have absolutely no idea how to make it work. If you could give me a hint or even implement a working driver into the container I'd really appreciate it. Quote Link to comment
codo1234 Posted June 23, 2015 Share Posted June 23, 2015 what is the user\password first login in transmission? Quote Link to comment
dirtysanchez Posted June 24, 2015 Share Posted June 24, 2015 what is the user\password first login in transmission? admin / password Quote Link to comment
skank Posted June 26, 2015 Share Posted June 26, 2015 Can someone help pls Installed this plugin. Installed docker for sabnzb and dropbox Sabnzb is working fine, but what i want to do know is following: - Set the nzb watched folder inside sabnzb to a folder in my dropbox account Thatswhy i installed dropbox. (i have a cache disk aswell) But now what? How do i set it up? It doesnt direct me to my dropbox account, cause i did not have to set up my account settings Quote Link to comment
Capt.Insano Posted June 28, 2015 Share Posted June 28, 2015 @gfjardim Any interest in 1. Adding Google Cloud Print to your cups Docker Container?: Here is the guide I used (including a PPA for ease of use) when setting up a raspberry pi as a CUPS print server. http://davesteele.github.io/cloudprint-service/index.html Maybe map the config file to a Docker exposed volume? 2. Adding iOS Airprint?: Again I followed this guide to add Airprint to Cloudrprint and CUPS on my pi: https://rohankapoor.com/2012/06/configuring-the-raspberry-pi-as-an-airprint-server/ Especially since unRAID 6.0.1 has added USB printer support, I would love to free my RasPi for other projects! Anyway, thanks as always gfjardim! The Capt Edit: see below!! Quote Link to comment
Capt.Insano Posted June 28, 2015 Share Posted June 28, 2015 @gfjardim Any interest in 1. Adding Google Cloud Print to your cups Docker Container?: Here is the guide I used (including a PPA for ease of use) when setting up a raspberry pi as a CUPS print server. http://davesteele.github.io/cloudprint-service/index.html Maybe map the config file to a Docker exposed volume? 2. Adding iOS Airprint?: Again I followed this guide to add Airprint to Cloudrprint and CUPS on my pi: https://rohankapoor.com/2012/06/configuring-the-raspberry-pi-as-an-airprint-server/ Especially since unRAID 6.0.1 has added USB printer support, I would love to free my RasPi for other projects! Anyway, thanks as always gfjardim! The Capt I was just looking through your cups DOCKERFILE and I think all of the above has already been added!! If so, please disregard all I said!! (and possibly think of adding "Cloudprint/Airprint Supported" to the container description to stop fools like me bothering you!!) Thanks again, The Capt! Quote Link to comment
Uirel Posted June 29, 2015 Share Posted June 29, 2015 Can someone help pls Installed this plugin. Installed docker for sabnzb and dropbox Sabnzb is working fine, but what i want to do know is following: - Set the nzb watched folder inside sabnzb to a folder in my dropbox account Thatswhy i installed dropbox. (i have a cache disk aswell) But now what? How do i set it up? It doesnt direct me to my dropbox account, cause i did not have to set up my account settings In the docker description is point you to the log file. If you open the log for your dropbox docker it'll have the link you need to follow to link the dropbox docker to you dropbox account. Quote Link to comment
otisk Posted June 30, 2015 Share Posted June 30, 2015 Hi gfjardim, I had still no luck getting my printer to work properly. I attached the error log of what happens when I try to print a test page. Maybe you could have a look at it and tell me how to resolve it? I guess the problem is this: PID 41 (/usr/lib/cups/filter/Xerox_Phaser_6000_6010/XRM_MF) stopped with status 108 (Exec format error) cups_testpage_errorlog.txt Quote Link to comment
gfjardim Posted June 30, 2015 Author Share Posted June 30, 2015 Hi gfjardim, I had still no luck getting my printer to work properly. I attached the error log of what happens when I try to print a test page. Maybe you could have a look at it and tell me how to resolve it? I guess the problem is this: PID 41 (/usr/lib/cups/filter/Xerox_Phaser_6000_6010/XRM_MF) stopped with status 108 (Exec format error) Right now I'm more focused and make this work for HP and Samsung. Then I'll add Epson and Xerox. Quote Link to comment
trurl Posted June 30, 2015 Share Posted June 30, 2015 Hi gfjardim, I had still no luck getting my printer to work properly. I attached the error log of what happens when I try to print a test page. Maybe you could have a look at it and tell me how to resolve it? I guess the problem is this: PID 41 (/usr/lib/cups/filter/Xerox_Phaser_6000_6010/XRM_MF) stopped with status 108 (Exec format error) Maybe that driver works on 64-bit systems that provide 32-bit support. For example, Windows 64-bit OS will work with 32-bit executables because Windows 64-bit OS provides support for 32-bit executables. unRAID 64-bit does not provide support for 32-bit executables. Quote Link to comment
hernandito Posted June 30, 2015 Share Posted June 30, 2015 Can someone help pls Installed this plugin. Installed docker for sabnzb and dropbox Sabnzb is working fine, but what i want to do know is following: - Set the nzb watched folder inside sabnzb to a folder in my dropbox account Thatswhy i installed dropbox. (i have a cache disk aswell) But now what? How do i set it up? It doesnt direct me to my dropbox account, cause i did not have to set up my account settings Skaknk did you figure this out yet? Quote Link to comment
O2L Posted July 7, 2015 Share Posted July 7, 2015 Hello gfjardim, I use your pyload docker since this post http://lime-technology.com/forum/index.php?topic=33965.msg324676 and it's worked perfectly since last year. I NAT the ports you exposed like this: 192.168.0.14:7227->7227/tcp 192.168.0.14:8000->8000/tcp 192.168.0.14:8022->9666/tcp For me 8000 for the GUI, 7227 remote and 9666 for SSH But i can't connect to SSH. Can you confirm please? I need to connect by SSH to the docker. What is the SSH port and the user/password to connect? Thx for the help. Obrigado Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.