April 11, 201511 yr since installing v6 (although i'm sure these were there before but just never knew about it), i enabled the email alerts for all alerts, warnings, etc. i have 3 drives reporting errors but it seems overall health is good as they report pass and are green, and haven't had any errors as of late in my monthly parity checks. can anyone help me decipher these and see what needs to be replaced? smartctl -a -A /dev/sdm smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Maxtor DiamondMax 21 Device Model: MAXTOR STM3320620AS Serial Number: 6QF15BV4 Firmware Version: 3.AAE User Capacity: 320,071,851,520 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sat Apr 11 12:51:18 2015 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 109 072 006 Pre-fail Always - 22628310 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3130 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 466136190 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18939 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 274 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 067 047 045 Old_age Always - 33 (Min/Max 27/34) 194 Temperature_Celsius 0x0022 033 053 000 Old_age Always - 33 (0 19 0 0 0) 195 Hardware_ECC_Recovered 0x001a 063 051 000 Old_age Always - 173089284 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 196 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 196 occurred at disk power-on lifetime: 8824 hours (367 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 4f 29 e8 07 40 Error: ICRC, ABRT 79 sectors at LBA = 0x0007e829 = 518185 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 f8 e7 07 40 00 00:01:38.966 READ DMA EXT 25 00 80 78 e7 07 40 00 00:01:38.964 READ DMA EXT 25 00 80 f8 e6 07 40 00 00:01:38.962 READ DMA EXT 25 00 80 78 e6 07 40 00 00:01:38.960 READ DMA EXT 25 00 80 f8 e5 07 40 00 00:01:38.958 READ DMA EXT Error 195 occurred at disk power-on lifetime: 8824 hours (367 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 6f 19 ff 06 40 Error: ICRC, ABRT 111 sectors at LBA = 0x0006ff19 = 458521 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 08 ff 06 40 00 00:01:32.043 READ DMA EXT 25 00 80 88 fe 06 40 00 00:01:32.042 READ DMA EXT 25 00 80 08 fe 06 40 00 00:01:32.040 READ DMA EXT 25 00 80 88 fd 06 40 00 00:01:32.038 READ DMA EXT 25 00 80 08 fd 06 40 00 00:01:32.033 READ DMA EXT Error 194 occurred at disk power-on lifetime: 6215 hours (258 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 6e e2 42 e5 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 6e e2 42 e5 00 07:42:28.642 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 6e e2 42 e0 00 07:42:28.418 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 6e e2 42 e5 00 07:42:28.353 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6e e2 42 e0 00 07:42:28.217 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 6e e2 42 e5 00 07:42:28.092 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 193 occurred at disk power-on lifetime: 6215 hours (258 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 6e e2 42 e5 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 6e e2 42 e5 00 07:42:28.642 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 6e e2 42 e0 00 07:42:28.418 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 6e e2 42 e5 00 07:42:28.353 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 af ea 42 e0 00 07:42:28.217 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 01 af ea 42 e0 00 07:42:28.092 READ MULTIPLE EXT Error 192 occurred at disk power-on lifetime: 5873 hours (244 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 6e e2 42 e5 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 37 00 01 6e e2 42 e5 00 01:42:26.591 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 6e e2 42 e0 00 01:42:24.510 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 6e e2 42 e5 00 01:42:24.451 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 01 6e e2 42 e0 00 01:42:24.226 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 01 6e e2 42 e5 00 01:42:24.153 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
April 11, 201511 yr Author smartctl -a -A /dev/sdi smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD6VX16 LU WWN Device Id: 5 000c50 046624073 Firmware Version: CC3C User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Apr 11 12:48:02 2015 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 339) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 183106160 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4306 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 142082900 9 Power_On_Hours 0x0032 055 011 000 Old_age Always - 40148 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 165 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 6 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 076 061 045 Old_age Always - 24 (Min/Max 24/28) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4305 194 Temperature_Celsius 0x0022 024 040 000 Old_age Always - 24 (0 16 0 0 0) 195 Hardware_ECC_Recovered 0x001a 023 006 000 Old_age Always - 183106160 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 170218143885528 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2624954381 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1420628157 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. smartctl -a -A /dev/sdg smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.18.5-unRAID] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD6S2ZN LU WWN Device Id: 5 000c50 04656b1eb Firmware Version: CC3C User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Apr 11 12:48:17 2015 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 346) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 1951440 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4125 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 4379738634 9 Power_On_Hours 0x0032 051 011 000 Old_age Always - 42985 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 166 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 096 000 Old_age Always - 4295032844 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 076 062 045 Old_age Always - 24 (Min/Max 24/29) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 54 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4125 194 Temperature_Celsius 0x0022 024 040 000 Old_age Always - 24 (0 17 0 0 0) 195 Hardware_ECC_Recovered 0x001a 018 004 000 Old_age Always - 1951440 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 152875065943969 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4004629862 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 498233303 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 42951 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
April 11, 201511 yr There's no major problems with any of those drives. You've got 9 reallocated sectors on the 320 gig, and around 10000 hours ago it had some problems which looks like it may have been cable / power related. Whenever v6 reboots, you're going to be emailed about the status of those drives since they do show values in the attributes which are monitored. After that, you're only going to be emailed status if those attributes change. If you start getting those emails, that's the time to start checking into whats going on. If they are still showing red in the dashboard, then I believe that there's an update to the webUI which will only turn them back green, and only show red when the values change.
April 11, 201511 yr Author thank you squid. these drives were never red in the webui. i just got that emails when i rebooted. i'll keep an eye on it for now.
Archived
This topic is now archived and is closed to further replies.