April 19, 201511 yr I recently got an e-mail from my server that a disk was bad. The main attributes were: 5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always 2984 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always 1591 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always 96 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline 96 It seems like the drive had been going bad for a while perhaps before I got a warning from my array. Is there a way to set up a monthly automatic SMART test (like I have the monthly automatic parity check) and have it send the results...or at least look and send if reallocated or uncorrected or some value was worse than some threshold I set? When does the array decide to take the disk off line and e-mail me that it is bad?
April 19, 201511 yr When does the array decide to take the disk off line and e-mail me that it is bad? UnRAID takes a disk offline when a write to it fails.
April 19, 201511 yr I recently got an e-mail from my server that a disk was bad. The main attributes were: 5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always 2984 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always 1591 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always 96 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline 96 It seems like the drive had been going bad for a while perhaps before I got a warning from my array. Is there a way to set up a monthly automatic SMART test (like I have the monthly automatic parity check) and have it send the results...or at least look and send if reallocated or uncorrected or some value was worse than some threshold I set? When does the array decide to take the disk off line and e-mail me that it is bad? That feature has been added to v6. Whenever a major attribute changes value (like reallocated, pending, etc) it will automatically send you an email. It doesn't look like we are too far off from entering the RC stage for v6.
April 19, 201511 yr I'd say it's ready now. Word is, it's about to go RC, then Final. Any problems seem to be only with the final polish, nothing major at all for awhile. Check out the Upgrading to UnRAID v6 guide.
April 20, 201511 yr I'd agree with a caveat => there were a LOT of changes in Beta 15 ... and LimeTech has a history of often needing an "a" or "b" release after a Beta to incorporate minor changes. I'd wait a week or so just to be sure there aren't any of those hidden "gotchas" ... I DO think we're on the home stretch for stable v6 release.
Archived
This topic is now archived and is closed to further replies.