amardilo Posted April 3, 2019 Share Posted April 3, 2019 (edited) I setup RDP-Calibre using a guide I found online and set my library directory to my share but my container size is now taking up 6GB. When I check my config folder inside the appdata/RDP-Calibre it's only using up about 264KB. Any ideas what I am doing wrong? Edited April 3, 2019 by amardilo Quote Link to comment
aptalca Posted April 3, 2019 Author Share Posted April 3, 2019 1 hour ago, amardilo said: I setup RDP-Calibre using a guide I found online and set my library directory to my share but my container size is now taking up 6GB. When I check my config folder inside the appdata/RDP-Calibre it's only using up about 264KB. Any ideas what I am doing wrong? Did you set the library path as /config as the readme says? Quote Link to comment
amardilo Posted April 4, 2019 Share Posted April 4, 2019 9 hours ago, aptalca said: Did you set the library path as /config as the readme says? I didn't. Do I set the library key as "/config" then stop the server and change it to the location of my calibre library? Quote Link to comment
Evgeniy Posted June 10, 2019 Share Posted June 10, 2019 Hello I install RDP-Calibre and I cant enter cyrillic letters in any input fields. Can you help me? Thanks Quote Link to comment
Szereka Posted September 1, 2019 Share Posted September 1, 2019 Hello I am Wondering IF its possible to have Multi Docker RDP-Calibre with Different names for Example RDP-Calibre_FF RDP-Calibre_HPFFA RDP-Calibre_OTHER have figured out how to have the different Config Files in different Folder Like RDP-Calibre/ 1 ,2 ,3 ,4 but when i restarted the Unraid 2 of the 3 RDP-Calibre Dockers Dissapeered. So How in Blue Skys Do i get Unraid to Keep Its Finger Off the Dockers ?? My Best Regards Szereka Quote Link to comment
Squid Posted September 1, 2019 Share Posted September 1, 2019 In CA's settings, enable reinstall default then from installed apps click reinstall default, change the name and assign new host ports and paths as applicable doneSent from my NSA monitored device Quote Link to comment
mgranger Posted September 18, 2019 Share Posted September 18, 2019 I am trying to get Home-Automation-Bridge to work but can't seem to get it connected with Home-Assistant. It won't recognize any of my devices anymore. I had it working awhile ago but then for some reason (updates I am sure) it is no longer recognizing any of my devices in Home Assistant. I was hoping to get some help on here. Quote Link to comment
rinixon Posted October 6, 2019 Share Posted October 6, 2019 I have just restarted RDP-Calibre, which I guess has upgraded to V4, but I now just have a black screen. Anybody else experienced this? Quote Link to comment
aptalca Posted October 6, 2019 Author Share Posted October 6, 2019 5 hours ago, rinixon said: I have just restarted RDP-Calibre, which I guess has upgraded to V4, but I now just have a black screen. Anybody else experienced this? v4 has breaking changes and doesn't work with my old personal image. It has now been deprecated and all users are recommended to switch to the new linuxserver/calibre image. In the new container, select the folder that holds your metadata.db and books as the library folder. @Squid can you remove my old personal rdp-calibre listing from Community Apps (or mark it as deprecated)? Thanks Quote Link to comment
rinixon Posted October 6, 2019 Share Posted October 6, 2019 39 minutes ago, aptalca said: v4 has breaking changes and doesn't work with my old personal image. It has now been deprecated and all users are recommended to switch to the new linuxserver/calibre image. In the new container, select the folder that holds your metadata.db and books as the library folder. @Squid can you remove my old personal rdp-calibre listing from Community Apps (or mark it as deprecated)? Thanks Thanks for the update - much appreciated Quote Link to comment
dockerPolice Posted October 6, 2019 Share Posted October 6, 2019 2 hours ago, aptalca said: v4 has breaking changes and doesn't work with my old personal image. It has now been deprecated and all users are recommended to switch to the new linuxserver/calibre image. In the new container, select the folder that holds your metadata.db and books as the library folder. @Squid can you remove my old personal rdp-calibre listing from Community Apps (or mark it as deprecated)? Thanks Based upon this, rdp-calibre is now blacklisted (instead of being deprecated since it doesn't appear to function anymore). FCP will complain about any instances installed until the user switches to the lsio version Quote Link to comment
aptalca Posted October 6, 2019 Author Share Posted October 6, 2019 3 hours ago, dockerPolice said: Based upon this, rdp-calibre is now blacklisted (instead of being deprecated since it doesn't appear to function anymore). FCP will complain about any instances installed until the user switches to the lsio version It does function unless EDGE is set to 1 which does in container updates Quote Link to comment
dockerPolice Posted October 7, 2019 Share Posted October 7, 2019 3 hours ago, aptalca said: It does function unless EDGE is set to 1 which does in container updates Now deprecated instead Quote Link to comment
jebusfreek666 Posted November 14, 2019 Share Posted November 14, 2019 I am trying to delete some of the files that were automatically uploaded from my phone to my server via plex camra upload. It allows me to "move to trash" jpegs, but when I try to do the same to mp4s it says trash has reached its maximum size. Clean up trash manually. I am sure it is something stupid I am just overlooking, but I can not find the trash to empty it. Any info on how to do this would be great. Also, is there a way to set it up to just delete things instead of putting them in trash? Quote Link to comment
LaVerte Posted January 1, 2020 Share Posted January 1, 2020 Hello there @aptalca, First off thank you for allthe work you made ! I have Installed the digikam app effortless and set EDGE to 1 but it look like the version of the software is 4.14.0 instead of the 6.4.0 displayed on the website. Do you have any idea what did i forgot ? Thanks Quote Link to comment
aptalca Posted January 1, 2020 Author Share Posted January 1, 2020 2 hours ago, LaVerte said: Hello there @aptalca, First off thank you for allthe work you made ! I have Installed the digikam app effortless and set EDGE to 1 but it look like the version of the software is 4.14.0 instead of the 6.4.0 displayed on the website. Do you have any idea what did i forgot ? Thanks I believe that is the last version available for the underlying os. No easy way to update I'm afraid Quote Link to comment
LaVerte Posted January 1, 2020 Share Posted January 1, 2020 11 minutes ago, aptalca said: I believe that is the last version available for the underlying os. No easy way to update I'm afraid By underlying os you mean guacamol ? i guess the only way is to run a vm then Quote Link to comment
OsoPolar Posted February 25, 2020 Share Posted February 25, 2020 HI Just trying to get calibre working following spaceinvaders tutorial but it does not work. Soon as i go to Webui i get errors Error: No books found TypeError: this.undef is not a function at printStackTrace.implementation.createException (http://192.168.23.174:8081/static/stacktrace.js:81:18) at printStackTrace.implementation.run (http://192.168.23.174:8081/static/stacktrace.js:66:25) at printStackTrace (http://192.168.23.174:8081/static/stacktrace.js:57:62) at render_error (http://192.168.23.174:8081/static/browse/browse.js:134:18) at booklist (http://192.168.23.174:8081/static/browse/browse.js:271:29) at HTMLDocument. (http://192.168.23.174:8081/browse/category/allbooks:34:17) at Function.ready (http://192.168.23.174:8081/static/jquery.js:392:9) at HTMLDocument.DOMContentLoaded (http://192.168.23.174:8081/static/jquery.js:745:10) I have triple checked i am following his settings but no luck i get no option to select my library!!! Quote Link to comment
aptalca Posted February 25, 2020 Author Share Posted February 25, 2020 24 minutes ago, OsoPolar said: HI Just trying to get calibre working following spaceinvaders tutorial but it does not work. Soon as i go to Webui i get errors Error: No books found TypeError: this.undef is not a function at printStackTrace.implementation.createException (http://192.168.23.174:8081/static/stacktrace.js:81:18) at printStackTrace.implementation.run (http://192.168.23.174:8081/static/stacktrace.js:66:25) at printStackTrace (http://192.168.23.174:8081/static/stacktrace.js:57:62) at render_error (http://192.168.23.174:8081/static/browse/browse.js:134:18) at booklist (http://192.168.23.174:8081/static/browse/browse.js:271:29) at HTMLDocument. (http://192.168.23.174:8081/browse/category/allbooks:34:17) at Function.ready (http://192.168.23.174:8081/static/jquery.js:392:9) at HTMLDocument.DOMContentLoaded (http://192.168.23.174:8081/static/jquery.js:745:10) I have triple checked i am following his settings but no luck i get no option to select my library!!! My calibre image is deprecated. Use the linuxserver one Quote Link to comment
OsoPolar Posted February 25, 2020 Share Posted February 25, 2020 1 hour ago, aptalca said: My calibre image is deprecated. Use the linuxserver one Cheers Quote Link to comment
redeuxx Posted March 2, 2020 Share Posted March 2, 2020 (edited) There are file operations in the background of Dolphine, how do I show this? There is no taskbar as there is in Krusader. Edited March 2, 2020 by redeuxx Quote Link to comment
ghstridr Posted March 7, 2020 Share Posted March 7, 2020 @aptalca I saw that boinc 7.4.22 is released. Quote Link to comment
ingux16 Posted September 24, 2020 Share Posted September 24, 2020 Anybody Please know how to make service start up after boot. For example ssh in Docker GUI app Tried sudo systemctl enable ssh , shows systemctl not found, of course because lack of systemd. Anyone know hot to start a service autonaticaly after boot . Tired write service ssh start after each boot. Quote Link to comment
Chess Posted December 7, 2020 Share Posted December 7, 2020 Trying to use the linuxserver/calibre docker, but when I install it I seem to get an APACHE GUACAMOLE docker image. Yes, I do have a guac docker image installed, but even if I turn that off I still get a guac web page pop up. I checked on the linuxserver page and it looks like they linked calibre to a guac image, but I'm not 100% sure. https://fleet.linuxserver.io/image?name=linuxserver/calibre Docker Hub linuxserver/calibre Build Time01 Dec 2020 10:33:20 Base Imagelsiobase/guacgui Quote Link to comment
kricker Posted April 16, 2021 Share Posted April 16, 2021 (edited) I am trying the Dolphin docker. When I use the "Find" feature it just replies "Invalid Protocol". Is there a way to enable the searching feature? Edited April 16, 2021 by kricker Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.