April 22, 201511 yr Hi, i upgraded from 14b to 15 When my Tower starts i get the following error: smbd: no process found Any ideas? Syslog attached syslog.txt
April 22, 201511 yr Author More Info: reverting back to 14b did not help at all no plugins installed Booting in safe mode did not help log.nmbd: [2015/04/22 08:14:42, 0] ../source3/nmbd/nmbd.c:908(main) nmbd version 4.1.17 started. Copyright Andrew Tridgell and the Samba Team 1992-2013 log-smbd: [2015/04/22 08:14:42, 0] ../source3/smbd/server.c:1189(main) smbd version 4.1.17 started. Copyright Andrew Tridgell and the Samba Team 1992-2013 root@Tower:~# pgrep -l mbd 1393 nmbd root@Tower:~#
April 22, 201511 yr Can you put your flash drive in a windows machine and run a checkdisk,? Make sure you shut down the system first.
April 22, 201511 yr Author E:\>chkdsk The type of the file system is FAT. The volume is in use by another process. Chkdsk might report errors when no corruption is present. Volume UNRAID created 18.06.2014 19:59 Volume Serial Number is 9A0B-B050 Windows is verifying files and folders... File and folder verification is complete. Windows has checked the file system and found no problems. 515.088.384 bytes total disk space. 196.608 bytes in 2 hidden files. 262.144 bytes in 30 folders. 317.513.728 bytes in 322 files. 197.115.904 bytes available on disk. 8.192 bytes in each allocation unit. 62.877 total allocation units on disk. 24.062 allocation units available on disk.
April 22, 201511 yr Apr 22 07:24:46 Tower emhttp: shcmd (45): :>/etc/samba/smb-shares.conf Apr 22 07:24:46 Tower emhttp: shcmd (46): cp /etc/exports- /etc/exports Apr 22 07:24:46 Tower avahi-daemon[1823]: Files changed, reloading. Apr 22 07:24:46 Tower emhttp: shcmd (47): echo '"/mnt/user/MOVIES" -async,no_subtree_check,fsid=100 *(sec=sys,rw,insecure,anongid=100,anonuid=99,all_squash)' >>/etc/exports Apr 22 07:24:46 Tower emhttp: shcmd (48): echo '"/mnt/user/TVSHOWS" -async,no_subtree_check,fsid=101 *(sec=sys,rw,insecure,anongid=100,anonuid=99,all_squash)' >>/etc/exports Apr 22 07:24:46 Tower emhttp: Restart SMB... Apr 22 07:24:46 Tower emhttp: shcmd (49): killall -HUP smbd Apr 22 07:24:46 Tower emhttp: shcmd: shcmd (49): exit status: 1 Just after setting up your User Shares for export, the restart of SMB appears to fail, don't know why. The only thing that is slightly different to other syslogs is that your shares are capitalized, which should not matter. A few other oddities or issues - * You received a read error on Disk 2, the Samsung, but the errors are all a generic "device error", not a bad sector. Drive is probably fine. Error could be almost anything, perhaps from the controller, and there is no further information about what was actually wrong. Could be a power issue ... * There's a low speed (SATA link up 1.5 Gbps) strange device connected to the last port on the 8 SATA port card, called 'MARVELL VIRTUALL', an ATAPI device, not a storage device. It is set up, but has one hiccup, a "HSM violation". A reset seems to make it happy. Apr 22 07:24:35 Tower logger: Installing user plugins Apr 22 07:24:35 Tower logger: plugin: installing: /boot/config/plugins/dynamix.plg Apr 22 07:24:35 Tower logger: plugin: not installing older version * This appears to show that there are still vestiges of v5 on your flash drive, which could cause strange issues. If you can't find any other reason for the SMB issue, you might want to redo your flash drive. We strongly recommend a re-format when preparing for v6. I think you may find the instructions in the Upgrading to UnRAID v6 guide to be useful, in re-preparing a v6 boot drive. The no-format section shows what can be kept and what HAS to be removed, but recommends re-formatting for max safety.
April 23, 201511 yr Author Hey Guys, Thanks for all the help. I just reformated my flash, and now i have a brand new 6.15 installation. Everything works fine now!
Archived
This topic is now archived and is closed to further replies.