CHBMB Posted May 20, 2015 Share Posted May 20, 2015 RC3 and i'm still having the same network issues with docker that were introduced with b15 i still have to switch docker network type to host, save, then switch back to bridge to get any internet connectivity with dockers. it's making testing dockers on my unraid box near impossible, because i can't tell whether it's issue with unraid itself or the docker if the docker doesn't get network connectivity. Is this the DNS issue I've posted a reply about in another thread? Link to comment
sparklyballs Posted May 20, 2015 Share Posted May 20, 2015 RC3 and i'm still having the same network issues with docker that were introduced with b15 i still have to switch docker network type to host, save, then switch back to bridge to get any internet connectivity with dockers. it's making testing dockers on my unraid box near impossible, because i can't tell whether it's issue with unraid itself or the docker if the docker doesn't get network connectivity. Is this the DNS issue I've posted a reply about in another thread? what thread ? Link to comment
CHBMB Posted May 20, 2015 Share Posted May 20, 2015 what thread ? http://lime-technology.com/forum/index.php?topic=39604.msg370150#msg370150 Link to comment
sparklyballs Posted May 20, 2015 Share Posted May 20, 2015 what thread ? http://lime-technology.com/forum/index.php?topic=39604.msg370150#msg370150 it would appear to be the same problem, yes. good to know i'm not alone, not good it's a problem though. Link to comment
htpcnewbie Posted May 20, 2015 Share Posted May 20, 2015 Upgraded from rc2 through update, everything went good. Hoping the strange VM issues and emhttp/network disconnects are addressed with this release. Thank you LT quickly trying to address known issues. Link to comment
RobJ Posted May 20, 2015 Share Posted May 20, 2015 I accepted the update to rc3, received the instruction to reboot and now I get a kernel panic after loading bzimage and bzroot - as in the attached image. I guess that I'm going to have to open the box to get the usb out and investigate from there ... Might be a corrupted download. Try downloading the full -rc3 and upgrading the old-fashioned way. Link to comment
scytherbladez Posted May 20, 2015 Share Posted May 20, 2015 Sounds like RC should go back to Beta... Link to comment
boof Posted May 20, 2015 Share Posted May 20, 2015 Jumping to kernel 4.x and bumps to associated other tools (docker etc) is one helluva change from previous betas. Link to comment
jumperalex Posted May 20, 2015 Share Posted May 20, 2015 I accepted the update to rc3, received the instruction to reboot and now I get a kernel panic after loading bzimage and bzroot - as in the attached image. I guess that I'm going to have to open the box to get the usb out and investigate from there ... That looks like my iommu problem. I see you are intel so you might need to append this in your syslinux: "intel_iommu=on" I had to do the same thing but for my AMD processor. As in I had to add "iommu=pt iommu=1" Sauce:http://www.linux-kvm.org/page/How_to_assign_devices_with_VT-d_in_KVM Link to comment
PeterB Posted May 20, 2015 Share Posted May 20, 2015 I accepted the update to rc3, received the instruction to reboot and now I get a kernel panic after loading bzimage and bzroot - as in the attached image. I guess that I'm going to have to open the box to get the usb out and investigate from there ... Okay, system coming up now. Turns out that the usb flash was full - shouldn't the upgrade procedure protect against this and/or issue a warning rather than simply saying 'reboot required'? Link to comment
archedraft Posted May 20, 2015 Share Posted May 20, 2015 Updated to rc3 without any issues. A few things I noticed: 1. Docker DNS issue - seems like this is a known issue but thought I would say it anyways 2. I did not receive a plugin update notification for rc3 or any new plugins for that matter, only using the agents for plugin notifications but it was working with rc15. Sending a test through agents works and gets received on my phone. Link to comment
RobJ Posted May 20, 2015 Share Posted May 20, 2015 I accepted the update to rc3, received the instruction to reboot and now I get a kernel panic after loading bzimage and bzroot - as in the attached image. I guess that I'm going to have to open the box to get the usb out and investigate from there ... Okay, system coming up now. Turns out that the usb flash was full - shouldn't the upgrade procedure protect against this and/or issue a warning rather than simply saying 'reboot required'? Probably. But you don't generally fix a problem until after it's discovered! Both the upgrade procedure is new and it's rather unusual now a days to fill a flash drive. Would you mind creating a Defect report? Link to comment
WeeboTech Posted May 20, 2015 Share Posted May 20, 2015 I accepted the update to rc3, received the instruction to reboot and now I get a kernel panic after loading bzimage and bzroot - as in the attached image. I guess that I'm going to have to open the box to get the usb out and investigate from there ... Okay, system coming up now. Turns out that the usb flash was full - shouldn't the upgrade procedure protect against this and/or issue a warning rather than simply saying 'reboot required'? Probably. But you don't generally fix a problem until after it's discovered! Both the upgrade procedure is new and it's rather unusual now a days to fill a flash drive. Would you mind creating a Defect report? Might be worthwhile to test the unzip return code and/or include md5sums file in the archive for the bzroot/bzimage and 'possibly' the syslinux modules that should not be subject to manual change. root@unRAIDb:/boot# unzip -t unRAIDServer-6.0-rc3-x86_64.zip Archive: unRAIDServer-6.0-rc3-x86_64.zip testing: bzimage OK testing: bzroot OK testing: config/ OK testing: config/go OK testing: config/network.cfg OK testing: config/disk.cfg OK testing: config/share.cfg OK testing: config/ident.cfg OK testing: config/plugins/ OK testing: license.txt OK testing: make_bootable.bat OK testing: make_bootable_mac OK testing: memtest OK testing: readme.txt OK testing: syslinux/ OK testing: syslinux/menu.c32 OK testing: syslinux/ldlinux.c32 OK testing: syslinux/syslinux.cfg- OK testing: syslinux/mbr.bin OK testing: syslinux/mboot.c32 OK testing: syslinux/syslinux.cfg OK testing: syslinux/syslinux.exe OK testing: syslinux/syslinux OK testing: syslinux/libutil.c32 OK testing: syslinux/libcom32.c32 OK testing: syslinux/make_bootable_mac.sh OK No errors detected in compressed data of unRAIDServer-6.0-rc3-x86_64.zip. root@unRAIDb:/boot# echo $? 0 root@unRAIDb:/boot# unzip -t unRAIDServer-6.0-rc3-x86_64.zip bzroot bzimage Archive: unRAIDServer-6.0-rc3-x86_64.zip testing: bzimage OK testing: bzroot OK No errors detected in unRAIDServer-6.0-rc3-x86_64.zip for the 2 files tested. root@unRAIDb:/boot# echo $? 0 While this checks the integrity of the zip archive, an included md5sums file can be utilized to check that the file was extracted correctly Link to comment
GHunter Posted May 20, 2015 Share Posted May 20, 2015 Updated to RC3. APCUPSD doesn't autostart now. I've checked the settings and applied them, and then it runs. After a reboot though, it doesn't autostart. I confirmed that the dynamix.apcupsd folder and dynamix.apcupsd.cfg file is there on the flash drive. Syslog attached. Gary syslog.zip Link to comment
Frank1940 Posted May 20, 2015 Share Posted May 20, 2015 Updated to RC3. APCUPSD doesn't autostart now. I've checked the settings and applied them, and then it runs. After a reboot though, it doesn't autostart. I confirmed that the dynamix.apcupsd folder and dynamix.apcupsd.cfg file is there on the flash drive. Syslog attached. Gary CONFIRMED! I have found the same thing. I had to first stop the UPS daemon and restart it to bring the UPS online. EDIT: I upgrade to rc3 from rc2. I am not sure what happens if one installs rc3 on a new flash drive. Link to comment
PeterB Posted May 20, 2015 Share Posted May 20, 2015 apcupsd has gone awol here too. Going to settings shows that all apcupsd settings have reverted to default. Trying to access the flash drive remotely suggests that smb isn't active either. Edit: Reverting to rc2! Link to comment
Frank1940 Posted May 20, 2015 Share Posted May 20, 2015 More testing on APCUPSD. I reset several the parameters on the 'UpsSettings' page and applied the changes. I then rebooted the server again. This time, it came up running with the new settings in place. Apparently, just starting the deamon does get saved when you click on the 'Apply' button. Perhaps, a note should be added to the release notes indicating that you have to re-setup the UPS settings, changing at least one parameter and 'Apply' if you are upgrading. Link to comment
RobJ Posted May 20, 2015 Share Posted May 20, 2015 Updated to RC3. APCUPSD doesn't autostart now. I've checked the settings and applied them, and then it runs. After a reboot though, it doesn't autostart. I confirmed that the dynamix.apcupsd folder and dynamix.apcupsd.cfg file is there on the flash drive. Syslog attached. There's a note about that in the first announcement post - [apcupsd note for -rc3] Upon booting -rc3, apcupsd will be "Off". If using apcupsd, please turn back "On" and Apply Settings. This is due to change in where settings file is stored. Unfortunately, most upgraders will use the new built in upgrade process, so won't see that note, and it's not in the Change notes either. May have to add a mechanism to show special installation notes on first boot afterward, or messages immediately prior to the actual installation. For now, I'll make it visible here! [apcupsd note for -rc3] Upon booting -rc3, apcupsd will be "Off". If using apcupsd, please turn back "On" and Apply Settings. This is due to change in where settings file is stored. Users have found that you also have to change a setting (and change it back), to make it stick. Link to comment
trurl Posted May 20, 2015 Share Posted May 20, 2015 Glad I saw this before upgrading. Since I run headless, the Windows System Tray icon for my slave APCUPSD is the way I usually know unRAID has finished rebooting. Link to comment
Frank1940 Posted May 20, 2015 Share Posted May 20, 2015 Updated to RC3. APCUPSD doesn't autostart now. I've checked the settings and applied them, and then it runs. After a reboot though, it doesn't autostart. I confirmed that the dynamix.apcupsd folder and dynamix.apcupsd.cfg file is there on the flash drive. Syslog attached. There's a note about that in the first announcement post - [apcupsd note for -rc3] Upon booting -rc3, apcupsd will be "Off". If using apcupsd, please turn back "On" and Apply Settings. This is due to change in where settings file is stored. Unfortunately, most upgraders will use the new built in upgrade process, so won't see that note, and it's not in the Change notes either. May have to add a mechanism to show special installation notes on first boot afterward, or messages immediately prior to the actual installation. For now, I'll make it visible here! [apcupsd note for -rc3] Upon booting -rc3, apcupsd will be "Off". If using apcupsd, please turn back "On" and Apply Settings. This is due to change in where settings file is stored. Changing from The Daemon Start setting from 'Off' to 'On' and then applying that alone did not result in that new setting being stored! I actually had to change one of the other settings to make the Daemon change 'stick'! Link to comment
Jencryzthers Posted May 20, 2015 Share Posted May 20, 2015 2. I did not receive a plugin update notification for rc3 or any new plugins for that matter, only using the agents for plugin notifications but it was working with rc15. Sending a test through agents works and gets received on my phone. I updated smoothly but I didn't receive any notification too Link to comment
Dephcon Posted May 20, 2015 Share Posted May 20, 2015 is there any reason why this file exists in the zip? syslinux/make_bootable_mac.sh Link to comment
limetech Posted May 20, 2015 Author Share Posted May 20, 2015 Sounds like RC should go back to Beta... Please refrain from posting these kinds of remarks, it adds nothing. Have you seen a typical linux kernel -rc change list? Link to comment
limetech Posted May 20, 2015 Author Share Posted May 20, 2015 Jumping to kernel 4.x and bumps to associated other tools (docker etc) is one helluva change from previous betas. No it's not. Please refrain from posting these kinds of remarks. Link to comment
sparklyballs Posted May 20, 2015 Share Posted May 20, 2015 is there any reason why this file exists in the zip? syslinux/make_bootable_mac.sh to make the usb key bootable on a mac Link to comment
Recommended Posts