[Plug-In] Community Applications


Recommended Posts

Hello,

 

I've installed this plugin but when I open the apps page it can't connect to donwload.

My Unraid is behind a proxy and I set the proxy in the go file.

Where do I set the proxy so I can get this working ?

 

Best regards,

 

Jos

Link to comment

Hi,

 

This is what I have in the go file :

 

http_proxy=http://proxy.ezorg.nl:8080

https_proxy=http://proxy.ezorg.nl:8080

/usr/local/sbin/emhttp &

 

Before I set this up I was unable to install the plugin so it seems to be working.

 

Best regards,

 

jos

Edited by Squid
Spacing
Link to comment
4 hours ago, Jos said:

Hi,

 

This is what I have in the go file :

 

http_proxy=http://proxy.ezorg.nl:8080 https_proxy=http://proxy.ezorg.nl:8080 /usr/local/sbin/emhttp &

 

Before I set this up I was unable to install the plugin so it seems to be working.

 

Best regards,

 

jos

We'll switch a PM'ing.  This may wind up being a back and forth thing.

Link to comment

I keep getting this message when trying to load Community Apps...

 

 

Something really wrong went on during get_content
Post the ENTIRE contents of this message in the Community Applications Support Thread

No data was returned. It is probable that another browser session has rebooted your server. Reloading this browser tab will probably fix this error

 

And yes, ive reloaded the browser many times..

 

 

Link to comment

I don't think this is correct:

Disclaimer: This script is NOT definitive. There may be other issues with your server that will affect compatibility.

Current unRaid Version: 6.8.3 Upgrade unRaid Version: 6.9.0-beta1


Checking for plugin updates
OK: All plugins up to date

Checking for plugin compatibility
Issue Found: dynamix.cache.dirs.plg is not known to Community Applications. Compatibility for this plugin CANNOT be determined and it may cause you issues.

 

Link to comment
1 hour ago, dlandon said:

I don't think this is correct:


Disclaimer: This script is NOT definitive. There may be other issues with your server that will affect compatibility.

Current unRaid Version: 6.8.3 Upgrade unRaid Version: 6.9.0-beta1


Checking for plugin updates
OK: All plugins up to date

Checking for plugin compatibility
Issue Found: dynamix.cache.dirs.plg is not known to Community Applications. Compatibility for this plugin CANNOT be determined and it may cause you issues.

 

Part of fix common problems actually.

 

Message is 100% correct (explanation below).  Fix is to uninstall cache dirs and then reinstall from Apps (NOT from Apps - Previous Apps)

 

 

 

Due to a template error, Cache Dirs was automatically blacklisted for a couple of days from the application feed because the XML template and the PluginURL referenced different plugins, and the plugin you have currently installed on your system is not technically the official dynamix cache folders.

 

Or put another way, the .plg file for cache folders for a couple of days referenced arberg's fork, and when you updated your installed plugin it installed that fork.  That fork is NOT known to CA hence the issue.  

Link to comment
5 hours ago, Squid said:

Part of fix common problems actually.

 

Message is 100% correct (explanation below).  Fix is to uninstall cache dirs and then reinstall from Apps (NOT from Apps - Previous Apps)

 

 

 

Due to a template error, Cache Dirs was automatically blacklisted for a couple of days from the application feed because the XML template and the PluginURL referenced different plugins, and the plugin you have currently installed on your system is not technically the official dynamix cache folders.

 

Or put another way, the .plg file for cache folders for a couple of days referenced arberg's fork, and when you updated your installed plugin it installed that fork.  That fork is NOT known to CA hence the issue.  

Wow, that goes back a long ways.

Link to comment

Hello, I am having problems installing new apps from the community plugin, it seems that they are installed well, but in the dashboard the logo does not load and the WebUI button does not appear nor half of the options you know that it can be attached capture

 

EDIT:a few days ago I moved the system to cache prefer before doing this I could install without problems I don't know if it will have to do

Sin título.jpg

Edited by Albertpj
Link to comment
2 hours ago, Albertpj said:

Hello, I am having problems installing new apps from the community plugin, it seems that they are installed well, but in the dashboard the logo does not load and the WebUI button does not appear nor half of the options you know that it can be attached capture

 

EDIT:a few days ago I moved the system to cache prefer before doing this I could install without problems I don't know if it will have to do

Sin título.jpg

That is basically that the icon failed to download.  Did you install those apps yesterday?  GitHub was having some trouble, and could account for that.

 

If reloading the dashboard page doesn't fix it up (ie: if the download got interrupted and the file is corrupted), then to force a redownload of the icon, edit the containers, switch to Advanced View in the top right

 

There's an field now called IconURL.  Make a note of what it was.  Change it to something else (anything).  Hit apply

Edit the container again, and change the IconURL back to what it was and hit apply.  Should fix you up.

 

 

Link to comment
6 minutes ago, Squid said:

That is basically that the icon failed to download.  Did you install those apps yesterday?  GitHub was having some trouble, and could account for that.

 

If reloading the dashboard page doesn't fix it up (ie: if the download got interrupted and the file is corrupted), then to force a redownload of the icon, edit the containers, switch to Advanced View in the top right

 

There's an field now called IconURL.  Make a note of what it was.  Change it to something else (anything).  Hit apply

Edit the container again, and change the IconURL back to what it was and hit apply.  Should fix you up.

 

 

thank you, if yesterday I noticed that the backup was marked above the plugin I will try what you are saying thank you very much but the issue that the webui does not come out is also strange and now I just realized that I cannot update a plugin either it tells me some permissions  and from what I have searched in the forum it may be that I have the flash drive with errors.  but thanks again i will try that

Link to comment
1 minute ago, Albertpj said:

thank you, if yesterday I noticed that the backup was marked above the plugin I will try what you are saying thank you very much but the issue that the webui does not come out is also strange and now I just realized that I cannot update a plugin either it tells me some permissions  and from what I have searched in the forum it may be that I have the flash drive with errors.  but thanks again i will try that

I didn't notice that (and you won't have an edit button for them).  Only that the icon was messed.  In that case, what's going on is your flash drive probably dropped offline (best guess).   Assuming that the apps with icons do have an edit button, then at the time of install something happened.  *Maybe* a reboot will fix it up, and barring that remove them and then reinstall.

Link to comment
16 minutes ago, Squid said:

No me di cuenta de eso (y no tendrás un botón de edición para ellos). Solo que el ícono estaba desordenado. En ese caso, lo que está sucediendo es que su unidad flash probablemente se desconectó (mejor estimación). Suponiendo que las aplicaciones con iconos tienen un botón de edición, en el momento de la instalación sucedió algo. * Tal vez * un reinicio lo arreglará, y salvo que los elimine y luego vuelva a instalar.

Well, if that is because something strange happened to me, the plugin nut gave me a lump and the interface stopped responding, so I decided to restart the server and I find that the server does not start because it cannot find the USB, it had it connected to the internal USB port.  (it is a hp gen8 ml310) then when not loading connect it to one of the rear ports and if it starts up but from what seems like something is happening the strange thing is that in the disk tab if it appears

 

EDIT: Nothing definitely something happens to me with the usb and tried to make a backup of the flash memory and I am left without access to the interface again tomorrow I will restart it since it was accessing remotely now if I restart I go and something is wrong I do not have access physical right now i will run out of services that even without the interface still work

Edited by Albertpj
Link to comment

I tried to update Community Apps to latest version, but something happened during the update and it failed. I reloaded the page and the "Apps" tab is gone and my unraid plugins page refuses to load.

 

I'm assuming I just need to do something to manually reinstall it? Anyone have a tip on how to do this:

Link to comment
1 hour ago, Squid said:

Easiest solution is to delete /config/plugins/community.applications.plg from the flash drive, reboot and reinstall

I recovered by downloading the plugin file to /tmp and ran:

 

plugin install /tmp/community.application.plg

 

 

and everything then worked. No reboot needed!

Link to comment

This has been a very rare recurring problem. (probably only noticed via CA because of it's release frequency vs other plugins).  I can replicate one way that this can happen and the OS was patched to prevent that, but I've changed the install plugin ever so slightly for what I *think* might have happened here.  Time will tell.

  • Like 1
Link to comment

For the first time i've noticed the choice:

Quote

Allow CA to send any emergency notifications:

 

This setting allows CA to periodically scan your system and alert you to the presence of:
1. Known malware and security vulnerabilities within applications
2. Critical security vulnerabilities within Unraid OS
3. Any installed applications which may seriously hinder the operation of your server

The help dialogue tells us what it does, but i'd be interested to know how it scans the system and to what extent is the "system"? Are there any privacy implications at all? I searched the 1st page in the thread but it doesn't mention "emergency" or "scan" or "vulnerabilities".

 

Thanks :)

Link to comment
1 hour ago, Derek_ said:

For the first time i've noticed the choice:

The help dialogue tells us what it does, but i'd be interested to know how it scans the system and to what extent is the "system"? Are there any privacy implications at all? I searched the 1st page in the thread but it doesn't mention "emergency" or "scan" or "vulnerabilities".

 

Thanks :)

I'm sure Squid can fill in the details, but I think it is just checking to make sure you don't have any addons (plugins or dockers) that were determined to be problematic after you installed them, and checking your Unraid version in case there is some critical reason you shouldn't be using that version.

Link to comment

It is similar to what Fix Common Problems already does, but far more limited in scope.  There are currently only 2 tests.  Basically what it allows us to do is easily alert the user if the conditions its looking for are found.  The difference though is that further tests do not require an update to CA if in the future another circumstance requires a test (and also remove tests if they also become irrelevant).  The system looks for new tests once a month.

 

 

  • Thanks 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.