13 hours ago, Kilrah said:

Looks to be an issue in the Share Floor plugin, should report in the support thread for that.

Ahhh, will do! Thanks!

Recieved an Update today (at least for me)

Had my interest die halfway through a plugin update. Leaving in a state of limbo.
Should I just manually remove the plugin file on the usb stick & reinstall?

Hey everyone,

I am wondering why my latest templates are not recognized by CA?
https://github.com/maschhoff/docker/tree/master/unraid%20xml
A lot of templates are ready to install via CA - the repo is setup for CA a long time ago.
These templates are not listed under Statistics / Invalid Templates or Temlpate Errors.
So any idea why iMapSyncWeb or webMC will not be listed?

Thanks very much!

5 minutes ago, knex666 said:

Hey everyone,

I am wondering why my latest templates are not recognized by CA?
https://github.com/maschhoff/docker/tree/master/unraid%20xml
A lot of templates are ready to install via CA - the repo is setup for CA a long time ago.
These templates are not listed under Statistics / Invalid Templates or Temlpate Errors.
So any idea why iMapSyncWeb or webMC will not be listed?

Thanks very much!

sorry I cant help, but I am interested in some of those

I hope they get accepted and posted soon

also, if you don't mind my asking

how would i create my own templates?

44 minutes ago, charettepa said:

sorry I cant help, but I am interested in some of those

I hope they get accepted and posted soon

also, if you don't mind my asking

how would i create my own templates?

Thats easy - build a running Container with Unraid. Just add a new Container and configure it right away.
For every container you setup you will find a template in /boot/config/plugins/dockerMan/templates-user/
copy that file and make it match to that xml format here:

https://forums.unraid.net/topic/42808-plugin-templates-for-ca-appstore/

Register for a new CA contributor - you will find all information there:

https://ca.unraid.net/submit

cheers!

3 hours ago, knex666 said:

So any idea why iMapSyncWeb or webMC will not be listed?

Webmc just appeared on last update 10 mins ago. Remember CA updates on a 2h schedule, not live

Edited May 20May 20 by Kilrah

Hi, how do I update from a very old version of the CA plugin?
I have just updated one of my servers from a 2022 release up to Unraid 7.0.1 and my "Apps" tab does not load properly and just shows a spinner forever.

The current installation instructions indicate you can get the plugin from the Apps tab which is a problem for me as it will not load.

Can I use the URL of a plg file to update? Where can I find that URL?

My CA plugin version is 2022.04.03. The plugins page says that version 2024.12.14 is available. But when I click Update the output seems to indicate it is just staying on 2022.04.03. And also when I refresh the Plugins page it still says I'm on 2022.04.03. And I guess this is still kind of problematic because the actual latest version of CA seems to be 2026.05.15gh.

Here is the output I get when I try to update the plugin by pressing the Update button.

plugin: updating: community.applications.plg
Executing hook script: pre_plugin_checks


Cleaning Up Old Versions
Fixing pinned apps
Setting up cron for background notifications


+==============================================================================
| Upgrading community.applications-2022.04.03-x86_64-1 package using /boot/config/plugins/community.applications/community.applications-2022.04.03-x86_64-1.txz
+==============================================================================
Pre-installing package community.applications-2022.04.03-x86_64-1...
Removing package: community.applications-2022.04.03-x86_64-1-upgraded-2026-05-28,10:04:47
Verifying package community.applications-2022.04.03-x86_64-1.txz.
Installing package community.applications-2022.04.03-x86_64-1.txz:
PACKAGE DESCRIPTION:
Package community.applications-2022.04.03-x86_64-1.txz installed.
Package community.applications-2022.04.03-x86_64-1 upgraded with new package /boot/config/plugins/community.applications/community.applications-2022.04.03-x86_64-1.txz.
Creating Directories

Adjusting icon for unRaid version

----------------------------------------------------
community.applications has been installed.
Copyright 2015-2022, Andrew Zawadzki
Version: 2022.04.03
----------------------------------------------------

plugin: community.applications.plg updated
Executing hook script: post_plugin_checks

---

Edited May 28May 28 by unburt

Hey
I submitted my repo featherdrop but it shows the repository/maintainer name ‚featherdrop'. Please rename it to ‚junkerderprovinz' so it matches my other apps (Krusader etc.), or remove the entry so I can re-add it with the correct name.

GitHub: https://github.com/junkerderprovinz/featherdrop

Thanks!

Hey guys, someone maybe knows why these "yunkan" containers keep re-appearing under "recently added" every few days?

The templates are found here

GitHub

yunkan-unraid-templates/templates at main · mrtian2016/yu...

云瞰 YunKan — Unraid Community Applications 模板仓库(CPU / OpenVINO / CUDA 3 个 amd64 变体) - mrtian2016/yunkan-unraid-templates

but i cannot see any reason why they are re-added all the time, i just see they update the "changes" part in the templates when its updated.

Its super annoying to see them every few days again and again.

Edited June 7Jun 7 by Joly0

Noticed that as well and thought maybe I was remembering wrong...

hi,

how can i send in a project to be added to CA?

greets

Marcel

2 minutes ago, verdi said:

how can i send in a project to be added to CA?

https://ca.unraid.net/submit

1 hour ago, Kilrah said:

https://ca.unraid.net/submit

thank you!

"Submission received and auto-approved. Your Docker apps should appear after the next Community Applications build publishes."

For a profile with multiple apps, is it preferred to have a single shared repo or a dedicated repo per app on github?

I submitted an app as a dedicated repo, but I changed my mind and want to use a single shared repository (unraid-templates). Is it possible to change the github repo after an app is submitted and published?

You must have a single repo.

If anyone figures out how to submit an additional plugin or have it detected in the form please let me know.

I’m using the 1 repository which contains the profile.xml and app.xml’s. My repository is detected but doesn’t detect the new .xml.

https://product.unraid.net/p/unclear-how-to-submit-new-plugin-to-be-published-to-ca

EDIT: Turns out as long as your plugin template .xml is in your CA repository it’ll auto detect for review.

Edited June 23Jun 23 by chodeus

Is there a way to turn off community apps from loading containers and just show plugins?

I don't use containers any more, but I still use plugins.

If CA is moving away from the Unraid tab to a new website what’s the install process going to look like? I don’t see any install buttons on the new website.

6 hours ago, wgstarks said:

If CA is moving away from the Unraid tab to a new website what’s the install process going to look like? I don’t see any install buttons on the new website.

No change, it's not for use on your server, it's so that people can browse CA without already having an Unraid system.

E.g. potential new customers, app devs who want to make a template and check it's there but who are not using Unraid themselves...

53 minutes ago, Kilrah said:

No change, it's not for use on your server, it's so that people can browse CA without already having an Unraid system.

E.g. potential new customers, app devs who want to make a template and check it's there but who are not using Unraid themselves...

Thanks. I guess the part of the announcement about it having a new home made me think it was moving.

The CA preview moved from being a page on the main LT site to being its own site.

I am having some trouble getting the submit page to recognize my app. I submitted my repo like 4 hours ago and it still shows

Current apps: 0

Visible in CA: 0

Hidden from CA: 0

Submission Status: Auto Approved.

When I originally submitted I had my mediaforge.xml template in the root of my repo but I moved that within minutes of submitting to CA and it still shows 0

Here is my repo url: https://github.com/braydin72/MediaForge

Hi,

I noticed an ownership issue with the latest community.applications-2026.07.11-x86_64-1.txz.

The package contents are shipped with the wrong owner/group:

andrewzawadzki/staff

instead of:

root/root

After installation, the Unraid overlay layer contained files owned by:

501:games

for example:

/var/local/overlay/usr/local/emhttp/plugins/community.applications/*

Even the overlay parent directories were affected:

/var/local/overlay/usr
/var/local/overlay/usr/local
/var/local/overlay/usr/local/emhttp
/var/local/overlay/usr/local/emhttp/plugins

owned by:

501:games

The issue persists after reboot because the plugin package is extracted into the overlay during startup.

I verified that the problem comes directly from the TXZ package:

tar -tvf community.applications-2026.07.11-x86_64-1.txz

showed all files with:

andrewzawadzki/staff

There is no ownership correction in the PLG install script, so upgradepkg applies the package metadata as-is.

Repacking the TXZ with:

chown -R root:root .
tar cJpf ...

and reinstalling fixed the ownership.

Could you please check the build process for the 2026.07.11 package?

Thanks!

Hi @Squid, small heads-up on the new app-card layout in the latest CA update: on the cards, the app name overlaps the bottom of the icon.

The cause looks like the icon is 8rem tall (img.ca_displayIcon) but .ca_iconArea only reserves 6.4rem and has no overflow, so the icon spills ~1.6rem past its box and the title right below it runs into it. It showed up with the recent "cleaner app-card titles" rework (dropping the category line and lowering the title's padding-top).

Two easy options if it helps:

.ca_iconArea { height: 8rem; } /* container gets the icon's real height */

.ca_holder .ca_applicationName { padding-top: 2.5rem; } /* or just push the title clear of the icon */

Thanks for all the work on CA!

Edited July 12Jul 12 by Junker der Provinz