Reallocated sectors on Parity


28 posts in this topic Last Reply

Recommended Posts

I am seeing a similar issue just after upgrading to v6 Not sure if this is a coincidence but I do know that drive was showing fine on v5 this is my parity drive as well.

 

1 Raw Read Error Rate 0x002f 200 200 051 Pre-fail Always - 2

3 Spin Up Time 0x0027 119 116 021 Pre-fail Always - 7025

4 Start Stop Count 0x0032 097 097 000 Old age Always - 3746

5 Reallocated Sector Ct 0x0033 200 200 140 Pre-fail Always - 1

7 Seek Error Rate 0x002e 200 200 000 Old age Always - 0

9 Power On Hours 0x0032 069 069 000 Old age Always - 22768

10 Spin Retry Count 0x0032 100 100 000 Old age Always - 0

11 Calibration Retry Count 0x0032 100 100 000 Old age Always - 0

12 Power Cycle Count 0x0032 100 100 000 Old age Always - 169

192 Power-Off Retract Count 0x0032 200 200 000 Old age Always - 142

193 Load Cycle Count 0x0032 186 186 000 Old age Always - 43355

194 Temperature Celsius 0x0022 107 103 000 Old age Always - 40

196 Reallocated Event Count 0x0032 199 199 000 Old age Always - 1

197 Current Pending Sector 0x0032 200 200 000 Old age Always - 0

198 Offline Uncorrectable 0x0030 200 200 000 Old age Offline - 0

199 UDMA CRC Error Count 0x0032 200 200 000 Old age Always - 2

200 Multi Zone Error Rate 0x0008 200 200 000 Old age Offline - 0

 

I went ahead and ordered a new drive but I won't be able to install it for over a week. I leave Monday for trip :( I just hope all will be fine while I am gone and it holds out until I get home on the 10th!

It would have "showed fine" in v5 since v5 has no notifications for this. None pending or uncorrectable so 1 allocation is probably not a problem as long as it doesn't keep increasing.
Link to post

I am seeing a similar issue just after upgrading to v6 Not sure if this is a coincidence but I do know that drive was showing fine on v5 this is my parity drive as well.

 

1 Raw Read Error Rate 0x002f 200 200 051 Pre-fail Always - 2

3 Spin Up Time 0x0027 119 116 021 Pre-fail Always - 7025

4 Start Stop Count 0x0032 097 097 000 Old age Always - 3746

5 Reallocated Sector Ct 0x0033 200 200 140 Pre-fail Always - 1

7 Seek Error Rate 0x002e 200 200 000 Old age Always - 0

9 Power On Hours 0x0032 069 069 000 Old age Always - 22768

10 Spin Retry Count 0x0032 100 100 000 Old age Always - 0

11 Calibration Retry Count 0x0032 100 100 000 Old age Always - 0

12 Power Cycle Count 0x0032 100 100 000 Old age Always - 169

192 Power-Off Retract Count 0x0032 200 200 000 Old age Always - 142

193 Load Cycle Count 0x0032 186 186 000 Old age Always - 43355

194 Temperature Celsius 0x0022 107 103 000 Old age Always - 40

196 Reallocated Event Count 0x0032 199 199 000 Old age Always - 1

197 Current Pending Sector 0x0032 200 200 000 Old age Always - 0

198 Offline Uncorrectable 0x0030 200 200 000 Old age Offline - 0

199 UDMA CRC Error Count 0x0032 200 200 000 Old age Always - 2

200 Multi Zone Error Rate 0x0008 200 200 000 Old age Offline - 0

 

I went ahead and ordered a new drive but I won't be able to install it for over a week. I leave Monday for trip :( I just hope all will be fine while I am gone and it holds out until I get home on the 10th!

 

If you are worried about it, just turn off the server while you are away.

Link to post

Weird  Drive Firmware / BIOS / OS interactions

 

I had a glitch on a SSD in my HTPC's boot drive (OCZ)

 

 

Everything was fine

I run Hard Disk Sentinel on all my windows systems

 

enabled the AHCI drivers in XP

no reallocated sectors

 

rebooted

 

Windows loaded and my HTPC came up

and I had 2048 reallocated sectors on the drive

 

There are drive firmware glitches but your drive sounds very near replacement time.

 

if it were in one of my unRaids

... I'd check the Warranty (probably over)

... I'd start with three preclears

... and then run Spinrite on it

... replace the drive in the near future if the above doesn't make things appear dramatically better

 

 

Bobby

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.