rtorrent (bubbaraid): torrents will not start

Hi,

On my bubbaraid system, rtorrent will not start any torrents!

I press the start icon on the wtorrent page, nothing happens     This is my config file, hope anyone can help me out here!

# This is the resource file for rTorrent. 
# BubbaRaid expects this file to be in /root/.rtorrent.rc
#
# Based on original .rtorrent.rc file from http://libtorrent.rakshasa.no/
# Modified by Bubba for BubbaRaid
#
# This assumes the following directory structure:
# 
# /mnt/disk1/torrents/downloading - Temporaray location for torrents while downloading (see "directory")
# /mnt/disk1/torrents/complete      - Torrents are moved here when complete (see "on_finished")
# /mnt/disk1/torrents/auto             - The 'autoload' directory for rtorrent to use.  Place a file 
#                                                    in here, and rtorrent loads it automatically.
#
# /mnt/disk1/torrents/downloading/rtorrent.session - for storing rtorrent session information
#

# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 250

# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50

# Maximum number of simultanious uploads per torrent.
#max_uploads = 15

# Global upload and download rate in KiB. "0" for unlimited.
#download_rate = 0
#upload_rate = 50

# Default directory to save the downloaded torrents.
directory = /mnt/disk1/torrents/downloading

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /mnt/disk1/torrents/downloading/rtorrent.session

# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = watch_directory,5,5,load_start=/mnt/disk1/torrents/auto/*.torrent
schedule = untied_directory,5,5,stop_untied=

# Close torrents when diskspace is low. */
#schedule = low_diskspace,5,60,close_low_diskspace=100M

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=500,200M,2000

execute_log = /var/log/rtorrent.log

# When the torrent finishes, it executes "mv -n <base_path> ~/Download/"
# and then sets the destination directory to "~/Download/". (0.7.7 )
on_finished = move_complete,"execute=mv,-u,$d.get_base_path=,/mnt/disk1/torrents/complete/ .set_directory=/mnt/disk1/torrents/complete/"

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
port_range = 6890-6999

# Set up XMLRPC port same as in lighttpd config
scgi_port = 127.0.0.1:5000

# Start opening ports at a random position within the port range.
#port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no

# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,enable_retry,prefer_plaintext

#
# Do not modify the following parameters unless you know what you're doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10

# Max number of files to keep open simultaniously.
#max_open_files = 128

# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>


# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"

# Remove a scheduled event.
#schedule_remove = "ip_tick1"
       

Perhaps worth mentioning that I am behind a firewall, but that this firewall never caused any problems before. Rtorrent DID work at some point ...

Cheers.

Mark

EDIT: I have bigger problems now (http://lime-technology.com/forum/index.php?topic=4006.msg35285#msg35285) -- this one will have to wait until those are solved...