[Solved] Cannot start array


IG82

Recommended Posts

Just upgraded my N36L microserver from 5.0.6 up to 6.0 and I cannot get the array to start.  I used a new freshly formatted/installed flash drive, copying the config directory (minus the plugin directory).

 

Upon hitting Start I get the below quickly, it then goes back to the same screen listing changeable device assignments:

 

Spinning up all drives ... Restart SMB ... Start NFS

 

Attached is the diagnostics zip.

 

Thanks for the help

Ian

hp1-diagnostics-20150620-2126.zip

Link to comment

Not sure if this is your problem or not, but its a line I don't have in my logs

 

Jun 20 21:26:12 hp1 emhttp: get_message: /boot/config/._Pro.key (-4)

 

Do you have a file named ._Pro.key in your config folder?

 

I'm wondering if the ._ maybe messing everything up?

 

 

Link to comment

Ah, thought I changed a setting to show hidden files but apparently it didn't work in Finder.

 

There was a ._Pro.key and ._go and ._plugins, I have removed these now.  Tried restarting but the issue still persists, only change to my eyes is that line has dropped from the syslog.

 

Attached is a new diagnostics set but I don't think there is anything other than the dropped line.

hp1-diagnostics-20150620-2255.zip

Link to comment

Don't think it is key related, it comes up Pro as expected with the full compliment of slots.

 

I have tried a different key, and also creating the key in Windows instead of OS X with the same result.

 

Will PM jonp and see if I can get him to look at the thread.

 

Also just tried my 5.0.6 key and the array starts as it should with no problems.

Link to comment

It looks like your cache drive is reporting as "not present.

 

Did you assign and remove a cache drive?

 

I noticed that too, have never had a cache drive in this machine.  The drive in the vars file may have been in the server but it would have been a long time ago!  I would have moved from 1TB WD to 2TB WD then 4TB Seagate.

 

I have tried changing the cache drive to no slots on the main page but this makes no difference.

 

It's very frustrating, 5.0.6 had a persistent issue with not shutting down cleanly.  No plugins at all as I run a separate XenServer, no solutions in the previous support thread.  Now I cannot perform an upgrade to the latest version.

Link to comment

Please edit the file 'config/disk.cfg' on your flash.  The top of it will look like:

 

# Generated settings:
spindownDelay="15"
queueDepth="1"
spinupGroups="no"
defaultFormat="2"
startState=""
md_num_stripes="1280"
md_write_limit="768"
md_sync_window="384"

 

Completely delete this line:

 

startState=""

 

Post back if this solves the problem.

Link to comment

Please edit the file 'config/disk.cfg' on your flash.  The top of it will look like:

 

# Generated settings:
spindownDelay="15"
queueDepth="1"
spinupGroups="no"
defaultFormat="2"
startState=""
md_num_stripes="1280"
md_write_limit="768"
md_sync_window="384"

 

Completely delete this line:

 

startState=""

 

Post back if this solves the problem.

 

Woohoo!

 

Yes Tom, that resolved the issue.  Many thanks for solving the issue.

 

Cheers

Ian

Link to comment
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.