mostlydave Posted June 22, 2015 Share Posted June 22, 2015 I'm on unraid v6, I just got home from vacation and updated to 6.0, my server is now acting strange. I can access sabnzb docker but after a while it becomes unresponsive and won't load. When that happens the web interface also stops working. I can access the server via putty and my shares and other dockers (Plex, sonarr, couchpotato) are still loading and working. The fist time this happened I tried a powerdown and powerdown -r command with no luck so I hard rebooted and that kicked off a parity check. How do I clean reboot now and diagnose whatever is causing the freeze up? I want to check if maybe there is an update for the sabnzb docker or disable it and see if it still freezes up, but I don't want to hard reboot and cause another parity check if I don't have to! Any help will be super appreciated! Edit: Attached Syslog, and noticed that unmenu loads, hopefully that will we helpful syslog-2015-06-22.txt Link to comment
dgaschk Posted June 22, 2015 Share Posted June 22, 2015 See Console Commands in my sig. Link to comment
mostlydave Posted June 23, 2015 Author Share Posted June 23, 2015 anyone have any advice on diagnosing what is causing the web interface freeze up? Link to comment
dgaschk Posted June 23, 2015 Share Posted June 23, 2015 See here: http://lime-technology.com/forum/index.php?topic=39257.0 Link to comment
mostlydave Posted June 23, 2015 Author Share Posted June 23, 2015 See here: http://lime-technology.com/forum/index.php?topic=39257.0 I have seen that and attached a syslog to my first post, am I missing something? Link to comment
dgaschk Posted June 23, 2015 Share Posted June 23, 2015 Start in SAFE-mode and see if problem still occurs. Link to comment
mostlydave Posted June 23, 2015 Author Share Posted June 23, 2015 It actually seems to me like it's my sabznb docker, it freezes up and when I try to restart it via the docker page the web ui becomes unresponsive. I'm going to see if I can find some console commands to restart or stop that docker and see what happens. Link to comment
mostlydave Posted June 24, 2015 Author Share Posted June 24, 2015 Well, I'm unable to stop or start sabnzbd with dock stop or docker start commands. I have no errors in my syslog in unmenu. I'm at a loss at this point. I'm not sure how to boot into safe mode without access to the gui or where to go from here. I have access to unmenu but not the regular web gui, I have been unable to a clean reboot. at this point I'm thinking of trying to restart after this latest parity check finishes and removing sabnzbd and trying nzbget instead. Anyone have any ideas or tips? Link to comment
dgaschk Posted June 24, 2015 Share Posted June 24, 2015 SAFE-mode is a boot selection. The option will appear in the display before the OS boots. Link to comment
dgaschk Posted June 24, 2015 Share Posted June 24, 2015 Well, I'm unable to stop or start sabnzbd with dock stop or docker start commands. I have no errors in my syslog in unmenu. I'm at a loss at this point. I'm not sure how to boot into safe mode without access to the gui or where to go from here. I have access to unmenu but not the regular web gui, I have been unable to a clean reboot. at this point I'm thinking of trying to restart after this latest parity check finishes and removing sabnzbd and trying nzbget instead. Anyone have any ideas or tips? Ask in the dedicated forum. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.