papnikol Posted November 20, 2010 Share Posted November 20, 2010 Hi, I bought an EARS 2TB few days ago and run preclear These were the results i got: root@Tower:~# screen -r 6946 = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 30C, Elapsed Time: 27:56:04 ============================================================================ == == Disk /dev/sdc has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 19,20c19,20 < Offline data collection status: (0x80) Offline data collection activity < was never started. --- > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. 54c54 < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 --- > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 11 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 12 67c67 < 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 --- > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 ============================================================================ Having had some problems with an EARS few weeks ago i decided to run preclear a second time, just to be sure. I have been away for some time and when i came back i reconnected using screen. I guess preclear was over and i saw this screen: > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x3035) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 > 3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always - 1091 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 > 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 > 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 > 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15 > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 > 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 > 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > ============================================================================ So, what does that mean? Could preclear, have stoped abruptly? Quote Link to comment
DigitalDivide Posted November 21, 2010 Share Posted November 21, 2010 Popped in an old drive which I thought I would use as a cache drive. However when running preclear I got the following results which I assume means the drive is bad. = unRAID server Pre-Clear disk /dev/sde = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 37C, Elapsed Time: 4:28:07 ============================================================================ == == Disk /dev/sde has NOT been precleared successfully == skip=9400 count=200 returned 05789 instead of 00000 skip=9600 count=200 returned 01230 instead of 00000 skip=10200 count=200 returned 60876 instead of 00000 skip=10400 count=200 returned 61084 inst ead of 00000 skip=10600 count=200 returned 63468 instead of 00000 skip=11200 count=200 returned 4407 7 instead of 00000 skip=11800 count=200 returned 33034 instead of 00000 skip=12400 count=200 returne d 28664 instead of 00000 skip=12600 count=200 returned 18660 instead of 00000 skip=13000 count=200 r eturned 31690 instead of 00000 ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 50c50 < 1 Raw_Read_Error_Rate 0x000f 060 051 006 Pre-fail Always - 139464863 --- > 1 Raw_Read_Error_Rate 0x000f 061 051 006 Pre-fail Always - 110916534 54c54 < 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 403149332 --- > 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 404672174 57c57 < 195 Hardware_ECC_Recovered 0x001a 060 051 000 Old_age Always --- > 195 Hardware_ECC_Recovered 0x001a 061 051 000 Old_age Always ============================================================================ Quote Link to comment
Joe L. Posted November 21, 2010 Share Posted November 21, 2010 Popped in an old drive which I thought I would use as a cache drive. However when running preclear I got the following results which I assume means the drive is bad. It indicates that zeros written to the drive are not being read back as zeros. (Could be an effect of a poor power supply and the drive being sensitive to noise on the supply line, or, a defective drive, or even a defective port on the disk controller.) It certainly indicates you do not want to trust it for your data. Joe L Quote Link to comment
DigitalDivide Posted November 21, 2010 Share Posted November 21, 2010 It must be the drive. I just ran a preclear in the same slot on a WD 2TB EARS drive and had no errors. Actually I've used that same slot the last 3 or 4 times for a preclear and that was the only drive with problems. Thanks Joe. Quote Link to comment
fonzie Posted November 23, 2010 Share Posted November 23, 2010 I just precleared two drives for the first time (I'm setting up my first unRAID server). The drives area Hitachi Deskstar 2TB and a WD20EARS. I think everything went accordingly but I can't really make heads or tails of the preclear results so I'm hoping I can be assisted. Here is the first part of the results: Nov 20 23:03:44 media preclear_disk-start[2081]: smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Nov 20 23:03:44 media preclear_disk-start[2081]: Home page is http://smartmontools.sourceforge.net/ Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: === START OF INFORMATION SECTION === Nov 20 23:03:44 media preclear_disk-start[2081]: Device Model: Hitachi HDS722020ALA330 Nov 20 23:03:44 media preclear_disk-start[2081]: Serial Number: JK11A8YBKPVMMF Nov 20 23:03:44 media preclear_disk-start[2081]: Firmware Version: JKAOA3EA Nov 20 23:03:44 media preclear_disk-start[2081]: User Capacity: 2,000,398,934,016 bytes Nov 20 23:03:44 media preclear_disk-start[2081]: Device is: Not in smartctl database [for details use: -P showall] Nov 20 23:03:44 media preclear_disk-start[2081]: ATA Version is: 8 Nov 20 23:03:44 media preclear_disk-start[2081]: ATA Standard is: ATA-8-ACS revision 4 Nov 20 23:03:44 media preclear_disk-start[2081]: Local Time is: Sat Nov 20 23:03:43 2010 PST Nov 20 23:03:44 media preclear_disk-start[2081]: SMART support is: Available - device has SMART capability. Nov 20 23:03:44 media preclear_disk-start[2081]: SMART support is: Enabled Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: === START OF READ SMART DATA SECTION === Nov 20 23:03:44 media preclear_disk-start[2081]: SMART overall-health self-assessment test result: PASSED Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: General SMART Values: Nov 20 23:03:44 media preclear_disk-start[2081]: Offline data collection status: (0x84)^IOffline data collection activity Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Nov 20 23:03:44 media preclear_disk-start[2081]: Self-test execution status: ( 0)^IThe previous self-test routine completed Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^Iwithout error or no self-test has ever Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^Ibeen run. Nov 20 23:03:44 media preclear_disk-start[2081]: Total time to complete Offline Nov 20 23:03:44 media preclear_disk-start[2081]: data collection: ^I^I (23212) seconds. Nov 20 23:03:44 media preclear_disk-start[2081]: Offline data collection Nov 20 23:03:44 media preclear_disk-start[2081]: capabilities: ^I^I^I (0x5b) SMART execute Offline immediate. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^IAuto Offline data collection on/off support. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISuspend Offline collection upon new Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^Icommand. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^IOffline surface scan supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISelf-test supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^INo Conveyance Self-test supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISelective Self-test supported. Nov 20 23:03:44 media preclear_disk-start[2081]: SMART capabilities: (0x0003)^ISaves SMART data before entering Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^Ipower-saving mode. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISupports SMART auto save timer. Nov 20 23:03:44 media preclear_disk-start[2081]: Error logging capability: (0x01)^IError logging supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^IGeneral Purpose Logging supported. Nov 20 23:03:44 media preclear_disk-start[2081]: Short self-test routine Nov 20 23:03:44 media preclear_disk-start[2081]: recommended polling time: ^I ( 1) minutes. Nov 20 23:03:44 media preclear_disk-start[2081]: Extended self-test routine Nov 20 23:03:44 media preclear_disk-start[2081]: recommended polling time: ^I ( 255) minutes. Nov 20 23:03:44 media preclear_disk-start[2081]: SCT capabilities: ^I (0x003d)^ISCT Status supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISCT Feature Control supported. Nov 20 23:03:44 media preclear_disk-start[2081]: ^I^I^I^I^ISCT Data Table supported. Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: SMART Attributes Data Structure revision number: 16 Nov 20 23:03:44 media preclear_disk-start[2081]: Vendor Specific SMART Attributes with Thresholds: Nov 20 23:03:44 media preclear_disk-start[2081]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Nov 20 23:03:44 media preclear_disk-start[2081]: 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 105 Nov 20 23:03:44 media preclear_disk-start[2081]: 3 Spin_Up_Time 0x0007 132 132 024 Pre-fail Always - 616 (Average 478) Nov 20 23:03:44 media preclear_disk-start[2081]: 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 14 Nov 20 23:03:44 media preclear_disk-start[2081]: 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 35 Nov 20 23:03:44 media preclear_disk-start[2081]: 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 21 Nov 20 23:03:44 media preclear_disk-start[2081]: 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14 Nov 20 23:03:44 media preclear_disk-start[2081]: 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14 Nov 20 23:03:44 media preclear_disk-start[2081]: 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 14 Nov 20 23:03:44 media preclear_disk-start[2081]: 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: SMART Error Log Version: 0 Nov 20 23:03:44 media preclear_disk-start[2081]: No Errors Logged Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: SMART Self-test log structure revision number 1 Nov 20 23:03:44 media preclear_disk-start[2081]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:03:44 media preclear_disk-start[2081]: SMART Selective self-test log data structure revision number 1 Nov 20 23:03:44 media preclear_disk-start[2081]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Nov 20 23:03:44 media preclear_disk-start[2081]: 1 0 0 Not_testing Nov 20 23:03:44 media preclear_disk-start[2081]: 2 0 0 Not_testing Nov 20 23:03:44 media preclear_disk-start[2081]: 3 0 0 Not_testing Nov 20 23:03:44 media preclear_disk-start[2081]: 4 0 0 Not_testing Nov 20 23:03:44 media preclear_disk-start[2081]: 5 0 0 Not_testing Nov 20 23:03:44 media preclear_disk-start[2081]: Selective self-test flags (0x0): Nov 20 23:03:44 media preclear_disk-start[2081]: After scanning selected spans, do NOT read-scan remainder of disk. Nov 20 23:03:44 media preclear_disk-start[2081]: If Selective self-test is pending on power-up, resume after 0 minute delay. Nov 20 23:03:44 media preclear_disk-start[2081]: Nov 20 23:09:40 media preclear_disk-start[3090]: smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Nov 20 23:09:40 media preclear_disk-start[3090]: Home page is http://smartmontools.sourceforge.net/ Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: === START OF INFORMATION SECTION === Nov 20 23:09:40 media preclear_disk-start[3090]: Device Model: WDC WD20EARS-00MVWB0 Nov 20 23:09:40 media preclear_disk-start[3090]: Serial Number: WD-WMAZA1184432 Nov 20 23:09:40 media preclear_disk-start[3090]: Firmware Version: 51.0AB51 Nov 20 23:09:40 media preclear_disk-start[3090]: User Capacity: 2,000,398,934,016 bytes Nov 20 23:09:40 media preclear_disk-start[3090]: Device is: Not in smartctl database [for details use: -P showall] Nov 20 23:09:40 media preclear_disk-start[3090]: ATA Version is: 8 Nov 20 23:09:40 media preclear_disk-start[3090]: ATA Standard is: Exact ATA specification draft version not indicated Nov 20 23:09:40 media preclear_disk-start[3090]: Local Time is: Sat Nov 20 23:09:40 2010 PST Nov 20 23:09:40 media preclear_disk-start[3090]: SMART support is: Available - device has SMART capability. Nov 20 23:09:40 media preclear_disk-start[3090]: SMART support is: Enabled Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: === START OF READ SMART DATA SECTION === Nov 20 23:09:40 media preclear_disk-start[3090]: SMART overall-health self-assessment test result: PASSED Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: General SMART Values: Nov 20 23:09:40 media preclear_disk-start[3090]: Offline data collection status: (0x82)^IOffline data collection activity Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^Iwas completed without error. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Nov 20 23:09:40 media preclear_disk-start[3090]: Self-test execution status: ( 0)^IThe previous self-test routine completed Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^Iwithout error or no self-test has ever Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^Ibeen run. Nov 20 23:09:40 media preclear_disk-start[3090]: Total time to complete Offline Nov 20 23:09:40 media preclear_disk-start[3090]: data collection: ^I^I (39000) seconds. Nov 20 23:09:40 media preclear_disk-start[3090]: Offline data collection Nov 20 23:09:40 media preclear_disk-start[3090]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^IAuto Offline data collection on/off support. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISuspend Offline collection upon new Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^Icommand. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^IOffline surface scan supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISelf-test supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^IConveyance Self-test supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISelective Self-test supported. Nov 20 23:09:40 media preclear_disk-start[3090]: SMART capabilities: (0x0003)^ISaves SMART data before entering Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^Ipower-saving mode. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISupports SMART auto save timer. Nov 20 23:09:40 media preclear_disk-start[3090]: Error logging capability: (0x01)^IError logging supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^IGeneral Purpose Logging supported. Nov 20 23:09:40 media preclear_disk-start[3090]: Short self-test routine Nov 20 23:09:40 media preclear_disk-start[3090]: recommended polling time: ^I ( 2) minutes. Nov 20 23:09:40 media preclear_disk-start[3090]: Extended self-test routine Nov 20 23:09:40 media preclear_disk-start[3090]: recommended polling time: ^I ( 255) minutes. Nov 20 23:09:40 media preclear_disk-start[3090]: Conveyance self-test routine Nov 20 23:09:40 media preclear_disk-start[3090]: recommended polling time: ^I ( 5) minutes. Nov 20 23:09:40 media preclear_disk-start[3090]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISCT Feature Control supported. Nov 20 23:09:40 media preclear_disk-start[3090]: ^I^I^I^I^ISCT Data Table supported. Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: SMART Attributes Data Structure revision number: 16 Nov 20 23:09:40 media preclear_disk-start[3090]: Vendor Specific SMART Attributes with Thresholds: Nov 20 23:09:40 media preclear_disk-start[3090]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Nov 20 23:09:40 media preclear_disk-start[3090]: 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 3 Spin_Up_Time 0x0027 168 168 021 Pre-fail Always - 6566 Nov 20 23:09:40 media preclear_disk-start[3090]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21 Nov 20 23:09:40 media preclear_disk-start[3090]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 21 Nov 20 23:09:40 media preclear_disk-start[3090]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19 Nov 20 23:09:40 media preclear_disk-start[3090]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 Nov 20 23:09:40 media preclear_disk-start[3090]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 59 Nov 20 23:09:40 media preclear_disk-start[3090]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: SMART Error Log Version: 1 Nov 20 23:09:40 media preclear_disk-start[3090]: No Errors Logged Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: SMART Self-test log structure revision number 1 Nov 20 23:09:40 media preclear_disk-start[3090]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: Nov 20 23:09:40 media preclear_disk-start[3090]: SMART Selective self-test log data structure revision number 1 Nov 20 23:09:40 media preclear_disk-start[3090]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Nov 20 23:09:40 media preclear_disk-start[3090]: 1 0 0 Not_testing Nov 20 23:09:40 media preclear_disk-start[3090]: 2 0 0 Not_testing Nov 20 23:09:40 media preclear_disk-start[3090]: 3 0 0 Not_testing Nov 20 23:09:40 media preclear_disk-start[3090]: 4 0 0 Not_testing Nov 20 23:09:40 media preclear_disk-start[3090]: 5 0 0 Not_testing Nov 20 23:09:40 media preclear_disk-start[3090]: Selective self-test flags (0x0): Nov 20 23:09:40 media preclear_disk-start[3090]: After scanning selected spans, do NOT read-scan remainder of disk. Nov 20 23:09:40 media preclear_disk-start[3090]: If Selective self-test is pending on power-up, resume after 0 minute delay. Nov 20 23:09:40 media preclear_disk-start[3090]: Quote Link to comment
fonzie Posted November 23, 2010 Share Posted November 23, 2010 Second part of the results: Nov 22 00:27:33 media preclear_disk-finish[3334]: smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Nov 22 00:27:33 media preclear_disk-finish[3334]: Home page is http://smartmontools.sourceforge.net/ Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: === START OF INFORMATION SECTION === Nov 22 00:27:33 media preclear_disk-finish[3334]: Device Model: Hitachi HDS722020ALA330 Nov 22 00:27:33 media preclear_disk-finish[3334]: Serial Number: JK11A8YBKPVMMF Nov 22 00:27:33 media preclear_disk-finish[3334]: Firmware Version: JKAOA3EA Nov 22 00:27:33 media preclear_disk-finish[3334]: User Capacity: 2,000,398,934,016 bytes Nov 22 00:27:33 media preclear_disk-finish[3334]: Device is: Not in smartctl database [for details use: -P showall] Nov 22 00:27:33 media preclear_disk-finish[3334]: ATA Version is: 8 Nov 22 00:27:33 media preclear_disk-finish[3334]: ATA Standard is: ATA-8-ACS revision 4 Nov 22 00:27:33 media preclear_disk-finish[3334]: Local Time is: Mon Nov 22 00:27:32 2010 PST Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART support is: Available - device has SMART capability. Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART support is: Enabled Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: === START OF READ SMART DATA SECTION === Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART overall-health self-assessment test result: PASSED Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: General SMART Values: Nov 22 00:27:33 media preclear_disk-finish[3334]: Offline data collection status: (0x84)^IOffline data collection activity Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Nov 22 00:27:33 media preclear_disk-finish[3334]: Self-test execution status: ( 0)^IThe previous self-test routine completed Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^Iwithout error or no self-test has ever Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^Ibeen run. Nov 22 00:27:33 media preclear_disk-finish[3334]: Total time to complete Offline Nov 22 00:27:33 media preclear_disk-finish[3334]: data collection: ^I^I (23212) seconds. Nov 22 00:27:33 media preclear_disk-finish[3334]: Offline data collection Nov 22 00:27:33 media preclear_disk-finish[3334]: capabilities: ^I^I^I (0x5b) SMART execute Offline immediate. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^IAuto Offline data collection on/off support. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISuspend Offline collection upon new Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^Icommand. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^IOffline surface scan supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISelf-test supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^INo Conveyance Self-test supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISelective Self-test supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART capabilities: (0x0003)^ISaves SMART data before entering Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^Ipower-saving mode. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISupports SMART auto save timer. Nov 22 00:27:33 media preclear_disk-finish[3334]: Error logging capability: (0x01)^IError logging supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^IGeneral Purpose Logging supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: Short self-test routine Nov 22 00:27:33 media preclear_disk-finish[3334]: recommended polling time: ^I ( 1) minutes. Nov 22 00:27:33 media preclear_disk-finish[3334]: Extended self-test routine Nov 22 00:27:33 media preclear_disk-finish[3334]: recommended polling time: ^I ( 255) minutes. Nov 22 00:27:33 media preclear_disk-finish[3334]: SCT capabilities: ^I (0x003d)^ISCT Status supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISCT Feature Control supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: ^I^I^I^I^ISCT Data Table supported. Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART Attributes Data Structure revision number: 16 Nov 22 00:27:33 media preclear_disk-finish[3334]: Vendor Specific SMART Attributes with Thresholds: Nov 22 00:27:33 media preclear_disk-finish[3334]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Nov 22 00:27:33 media preclear_disk-finish[3334]: 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 105 Nov 22 00:27:33 media preclear_disk-finish[3334]: 3 Spin_Up_Time 0x0007 132 132 024 Pre-fail Always - 616 (Average 478) Nov 22 00:27:33 media preclear_disk-finish[3334]: 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 14 Nov 22 00:27:33 media preclear_disk-finish[3334]: 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 35 Nov 22 00:27:33 media preclear_disk-finish[3334]: 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 46 Nov 22 00:27:33 media preclear_disk-finish[3334]: 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 14 Nov 22 00:27:33 media preclear_disk-finish[3334]: 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14 Nov 22 00:27:33 media preclear_disk-finish[3334]: 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 14 Nov 22 00:27:33 media preclear_disk-finish[3334]: 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART Error Log Version: 0 Nov 22 00:27:33 media preclear_disk-finish[3334]: No Errors Logged Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART Self-test log structure revision number 1 Nov 22 00:27:33 media preclear_disk-finish[3334]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 00:27:33 media preclear_disk-finish[3334]: SMART Selective self-test log data structure revision number 1 Nov 22 00:27:33 media preclear_disk-finish[3334]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Nov 22 00:27:33 media preclear_disk-finish[3334]: 1 0 0 Not_testing Nov 22 00:27:33 media preclear_disk-finish[3334]: 2 0 0 Not_testing Nov 22 00:27:33 media preclear_disk-finish[3334]: 3 0 0 Not_testing Nov 22 00:27:33 media preclear_disk-finish[3334]: 4 0 0 Not_testing Nov 22 00:27:33 media preclear_disk-finish[3334]: 5 0 0 Not_testing Nov 22 00:27:33 media preclear_disk-finish[3334]: Selective self-test flags (0x0): Nov 22 00:27:33 media preclear_disk-finish[3334]: After scanning selected spans, do NOT read-scan remainder of disk. Nov 22 00:27:33 media preclear_disk-finish[3334]: If Selective self-test is pending on power-up, resume after 0 minute delay. Nov 22 00:27:33 media preclear_disk-finish[3334]: Nov 22 04:20:46 media preclear_disk-finish[14155]: smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Nov 22 04:20:46 media preclear_disk-finish[14155]: Home page is http://smartmontools.sourceforge.net/ Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: === START OF INFORMATION SECTION === Nov 22 04:20:46 media preclear_disk-finish[14155]: Device Model: WDC WD20EARS-00MVWB0 Nov 22 04:20:46 media preclear_disk-finish[14155]: Serial Number: WD-WMAZA1184432 Nov 22 04:20:46 media preclear_disk-finish[14155]: Firmware Version: 51.0AB51 Nov 22 04:20:46 media preclear_disk-finish[14155]: User Capacity: 2,000,398,934,016 bytes Nov 22 04:20:46 media preclear_disk-finish[14155]: Device is: Not in smartctl database [for details use: -P showall] Nov 22 04:20:46 media preclear_disk-finish[14155]: ATA Version is: 8 Nov 22 04:20:46 media preclear_disk-finish[14155]: ATA Standard is: Exact ATA specification draft version not indicated Nov 22 04:20:46 media preclear_disk-finish[14155]: Local Time is: Mon Nov 22 04:20:46 2010 PST Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART support is: Available - device has SMART capability. Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART support is: Enabled Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: === START OF READ SMART DATA SECTION === Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART overall-health self-assessment test result: PASSED Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: General SMART Values: Nov 22 04:20:46 media preclear_disk-finish[14155]: Offline data collection status: (0x84)^IOffline data collection activity Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^IAuto Offline Data Collection: Enabled. Nov 22 04:20:46 media preclear_disk-finish[14155]: Self-test execution status: ( 0)^IThe previous self-test routine completed Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^Iwithout error or no self-test has ever Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^Ibeen run. Nov 22 04:20:46 media preclear_disk-finish[14155]: Total time to complete Offline Nov 22 04:20:46 media preclear_disk-finish[14155]: data collection: ^I^I (39000) seconds. Nov 22 04:20:46 media preclear_disk-finish[14155]: Offline data collection Nov 22 04:20:46 media preclear_disk-finish[14155]: capabilities: ^I^I^I (0x7b) SMART execute Offline immediate. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^IAuto Offline data collection on/off support. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISuspend Offline collection upon new Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^Icommand. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^IOffline surface scan supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISelf-test supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^IConveyance Self-test supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISelective Self-test supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART capabilities: (0x0003)^ISaves SMART data before entering Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^Ipower-saving mode. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISupports SMART auto save timer. Nov 22 04:20:46 media preclear_disk-finish[14155]: Error logging capability: (0x01)^IError logging supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^IGeneral Purpose Logging supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: Short self-test routine Nov 22 04:20:46 media preclear_disk-finish[14155]: recommended polling time: ^I ( 2) minutes. Nov 22 04:20:46 media preclear_disk-finish[14155]: Extended self-test routine Nov 22 04:20:46 media preclear_disk-finish[14155]: recommended polling time: ^I ( 255) minutes. Nov 22 04:20:46 media preclear_disk-finish[14155]: Conveyance self-test routine Nov 22 04:20:46 media preclear_disk-finish[14155]: recommended polling time: ^I ( 5) minutes. Nov 22 04:20:46 media preclear_disk-finish[14155]: SCT capabilities: ^I (0x3035)^ISCT Status supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISCT Feature Control supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: ^I^I^I^I^ISCT Data Table supported. Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART Attributes Data Structure revision number: 16 Nov 22 04:20:46 media preclear_disk-finish[14155]: Vendor Specific SMART Attributes with Thresholds: Nov 22 04:20:46 media preclear_disk-finish[14155]: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE Nov 22 04:20:46 media preclear_disk-finish[14155]: 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 3 Spin_Up_Time 0x0027 168 168 021 Pre-fail Always - 6566 Nov 22 04:20:46 media preclear_disk-finish[14155]: 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21 Nov 22 04:20:46 media preclear_disk-finish[14155]: 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 50 Nov 22 04:20:46 media preclear_disk-finish[14155]: 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19 Nov 22 04:20:46 media preclear_disk-finish[14155]: 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 Nov 22 04:20:46 media preclear_disk-finish[14155]: 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 60 Nov 22 04:20:46 media preclear_disk-finish[14155]: 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART Error Log Version: 1 Nov 22 04:20:46 media preclear_disk-finish[14155]: No Errors Logged Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART Self-test log structure revision number 1 Nov 22 04:20:46 media preclear_disk-finish[14155]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: Nov 22 04:20:46 media preclear_disk-finish[14155]: SMART Selective self-test log data structure revision number 1 Nov 22 04:20:46 media preclear_disk-finish[14155]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Nov 22 04:20:46 media preclear_disk-finish[14155]: 1 0 0 Not_testing Nov 22 04:20:46 media preclear_disk-finish[14155]: 2 0 0 Not_testing Nov 22 04:20:46 media preclear_disk-finish[14155]: 3 0 0 Not_testing Nov 22 04:20:46 media preclear_disk-finish[14155]: 4 0 0 Not_testing Nov 22 04:20:46 media preclear_disk-finish[14155]: 5 0 0 Not_testing Nov 22 04:20:46 media preclear_disk-finish[14155]: Selective self-test flags (0x0): Nov 22 04:20:46 media preclear_disk-finish[14155]: After scanning selected spans, do NOT read-scan remainder of disk. Nov 22 04:20:46 media preclear_disk-finish[14155]: If Selective self-test is pending on power-up, resume after 0 minute delay. Nov 22 04:20:46 media preclear_disk-finish[14155]: Quote Link to comment
fonzie Posted November 23, 2010 Share Posted November 23, 2010 final part Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Disk /dev/sdb has been successfully precleared Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Ran 1 preclear-disk cycle Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Using :Read block size = 8225280 Bytes Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Pre Read Time : 7:43:57 (71 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Zeroing time : 7:24:16 (75 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Post Read Time : 14:01:46 (39 MB/s) Nov 22 04:20:46 media preclear_disk-diff[14168]: == Last Cycle's Total Time : 29:11:07 Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Total Elapsed Time 29:11:07 Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Disk Start Temperature: 26C Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: == Current Disk Temperature: 27C, Nov 22 04:20:46 media preclear_disk-diff[14168]: == Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: S.M.A.R.T. error count differences detected after pre-clear Nov 22 04:20:46 media preclear_disk-diff[14168]: note, some 'raw' values may change, but not be an indication of a problem Nov 22 04:20:46 media preclear_disk-diff[14168]: 19,20c19,20 Nov 22 04:20:46 media preclear_disk-diff[14168]: < Offline data collection status: (0x82)^IOffline data collection activity Nov 22 04:20:46 media preclear_disk-diff[14168]: < ^I^I^I^I^Iwas completed without error. Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > Offline data collection status: (0x84)^IOffline data collection activity Nov 22 04:20:46 media preclear_disk-diff[14168]: > ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 22 04:20:46 media preclear_disk-diff[14168]: 54c54 Nov 22 04:20:46 media preclear_disk-diff[14168]: < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Nov 22 04:20:46 media preclear_disk-diff[14168]: 63c63 Nov 22 04:20:46 media preclear_disk-diff[14168]: < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 59 Nov 22 04:20:46 media preclear_disk-diff[14168]: --- Nov 22 04:20:46 media preclear_disk-diff[14168]: > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 60 Nov 22 04:20:46 media preclear_disk-diff[14168]: ============================================================================ Nov 22 04:20:46 media preclear_disk-diff[14168]: Quote Link to comment
nukhem Posted November 25, 2010 Share Posted November 25, 2010 Here are my results using a brand new WD20EARS jumpered hdd after around 26hours of preclearing, is there anything bad about the drive? Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: S.M.A.R.T. error count differences detected after pre-clear Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: note, some 'raw' values may change, but not be an indication of a problem Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: 19,20c19,20 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < Offline data collection status: (0x80)^IOffline data collection activity Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < ^I^I^I^I^Iwas never started. Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: --- Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > Offline data collection status: (0x84)^IOffline data collection activity Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: 54c54 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: --- Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: 58c58 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: --- Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: 63c63 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 8 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: --- Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 9 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: 67c67 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: < 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: --- Nov 25 18:55:43 Apollo preclear_disk-diff[6570]: > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Quote Link to comment
Joe L. Posted November 25, 2010 Share Posted November 25, 2010 final part Everything looks quite normal. Enjoy your new drive. Quote Link to comment
Joe L. Posted November 25, 2010 Share Posted November 25, 2010 Here are my results using a brand new WD20EARS jumpered hdd after around 26hours of preclearing, is there anything bad about the drive? Nothing looks bad at all. Enjoy your new drive. Quote Link to comment
DoeBoye Posted November 26, 2010 Share Posted November 26, 2010 Sadly, second EARS drive in a row to fail preclear. Tried it twice, using different sata cables and controller cards. Here are the results. Is this a bad drive, or something else? = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = = = = = = = = Elapsed Time: 8:18:41 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 = = = = = = = Elapsed Time: 8:18:46 dd: writing `/dev/sdf': Input/output error 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000276461 s, 0.0 kB/s =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = = = = = = = Elapsed Time: 8:18:51 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area = = = = = = Elapsed Time: 8:18:56 dd: writing `/dev/sdf': Input/output error 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000272606 s, 0.0 kB/s =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = = = = = = Elapsed Time: 8:19:01 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes = = = = = Elapsed Time: 8:19:06 dd: writing `/dev/sdf': Input/output error 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000682 s, 0.0 kB/s dd: writing `/dev/sdf': Input/output error 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000501175 s, 0.0 kB/s =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = = = = = Elapsed Time: 8:19:08 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state = = = = Elapsed Time: 8:19:13 dd: writing `/dev/sdf': Input/output error 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000991289 s, 0.0 kB/s =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning = = = Elapsed Time: 8:19:18 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries = = Elapsed Time: 8:19:23 Restarting udevd =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Verifying the clear has been successful. = Elapsed Time: 8:19:38 =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Elapsed Time: 8:19:43 ============================================================================ == == SORRY: Disk /dev/sdf MBR could NOT be precleared == == out4= 00000 == out5= 00000 ============================================================================ 0+0 records in 0+0 records out 0 bytes (0 B) copied, 1.783e-05 s, 0.0 kB/s 0000000 root@Tower:/boot# Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 [1] 4262 -bash: 4: command not found root@Tower:/boot# -bash: Step: command not found Quote Link to comment
Joe L. Posted November 26, 2010 Share Posted November 26, 2010 Sadly, second EARS drive in a row to fail preclear. Tried it twice, using different sata cables and controller cards. Here are the results. Is this a bad drive, or something else? Impossible to tell from that output the root cause. Obviously the drive is not writable. Were both drives in the same drive cage? Using the same power connector? Perhaps that is it. Were they both dropped by the same UPS delivery person? Perhaps that is the answer. Can you get a SMART report from the drive? Does it respond to an hdparm command? smartctl -a -d ata /dev/sdf hdparm -I /dev/sdf Joe L. Quote Link to comment
DoeBoye Posted November 26, 2010 Share Posted November 26, 2010 Hi Joe, Thanks for the quick response! In answer to your queries: Were both drives in the same drive cage? Yup. Regular non-hot-swap 4in3s Using the same power connector? hmmm... Good question. Not entirely sure. I swapped sata cable and port, but not sure about power supply cable. I'll try that next. As far as the power supply itself, it's a Corsair 750watt... Were they both dropped by the same UPS delivery person? Nope. I bought 2 at once at first. One was fine, second was bad. Returned for new one. It is also misbehaving... Can you get a SMART report from the drive? Does it respond to an hdparm command? Here it is: (NOTE: Drive changed from sdf to sda because I swapped controller cable after it failed the first time this morning) Linux 2.6.32.9-unRAID. root@Tower:~# smartctl -a -d ata /dev/sda smartctl version 5.38 [i486-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA0821403 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Nov 25 23:43:10 2010 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (35880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 198 165 021 Pre-fail Always - 5058 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 14 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 198 194 000 Old_age Always - 48 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 21 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 12 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 34 194 Temperature_Celsius 0x0022 121 116 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@Tower:~# Here's HDPARM result: root@Tower:~# hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: WDC WD20EARS-00MVWB0 Serial Number: WD-WMAZA0821403 Firmware Revision: 51.0AB51 Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5 Standards: Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 3907029168 device size with M = 1024*1024: 1907729 MBytes device size with M = 1000*1000: 2000398 MBytes (2000 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * SATA-I signaling speed (1.5Gb/s) * SATA-II signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * unknown 76[12] DMA Setup Auto-Activate optimization * Software settings preservation * SMART Command Transport (SCT) feature set * SCT LBA Segment Access (AC2) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] (vendor specific) unknown 206[13] (vendor specific) Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 366min for SECURITY ERASE UNIT. 366min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50014ee655c212e6 NAA : 5 IEEE OUI : 14ee Unique ID : 655c212e6 Checksum: correct root@Tower:~# Quote Link to comment
joelones Posted November 27, 2010 Share Posted November 27, 2010 Hey Joe L., not sure what to make of this output seems like others experienced similar results with EARS in previous posts. Hopefully nothing too bad, thought I'd post the results anyway. First drive I preclear with these results with the same controller. Added jumper on pins 7 & 8 before preclear. The drive is a brand new WD15EARS. Thanks in advance. Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: ============================================================================ Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Disk /dev/sdh has been successfully precleared Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Ran 1 preclear-disk cycle Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Using :Read block size = 8225280 Bytes Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Last Cycle's Pre Read Time : 5:45:46 (72 MB/s) Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Last Cycle's Zeroing time : 7:09:59 (58 MB/s) Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Last Cycle's Post Read Time : 13:00:29 (32 MB/s) Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Last Cycle's Total Time : 25:57:21 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Total Elapsed Time 25:57:21 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Disk Start Temperature: 26C Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Current Disk Temperature: 29C, Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: == Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: ============================================================================ Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: S.M.A.R.T. error count differences detected after pre-clear Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: note, some 'raw' values may change, but not be an indication of a problem Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: 19,20c19,20 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < Offline data collection status: (0x80)^IOffline data collection activity Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < ^I^I^I^I^Iwas never started. Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: --- Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > Offline data collection status: (0x84)^IOffline data collection activity Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > ^I^I^I^I^Iwas suspended by an interrupting command from host. Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: 54c54 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: --- Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: 58c58 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: --- Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 1 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: 63c63 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 7 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: --- Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 9 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: 67c67 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: < 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: --- Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: ============================================================================ Nov 26 17:32:27 Clara-Belle preclear_disk-diff[30942]: Quote Link to comment
Traxxus Posted November 28, 2010 Share Posted November 28, 2010 So got an RMA hard drive in for the one I posted about last time about a week or so ago. It went much faster, took about 30 hours with no errors except for the stuff at the end. Nov 27 17:36:29 Tower dhcpcd[1272]: sending DHCP_REQUEST for 192.168.1.101 to 192.168.1.1 Nov 27 17:36:29 Tower dhcpcd[1272]: dhcpIPaddrLeaseTime=86400 in DHCP server response. Nov 27 17:36:29 Tower dhcpcd[1272]: dhcpT1value is missing in DHCP server response. Assuming 43200 sec Nov 27 17:36:29 Tower dhcpcd[1272]: dhcpT2value is missing in DHCP server response. Assuming 75600 sec Nov 27 17:36:29 Tower dhcpcd[1272]: DHCP_ACK received from (192.168.1.1) and Nov 26 17:50:52 Tower preclear_disk-start[2172]: SMART Self-test log structure revision number 1 Nov 26 17:50:52 Tower preclear_disk-start[2172]: No self-tests have been logged. [To run self-tests, use: smartctl -t] Nov 26 17:50:52 Tower preclear_disk-start[2172]: Nov 26 17:50:52 Tower preclear_disk-start[2172]: Nov 26 17:50:52 Tower preclear_disk-start[2172]: SMART Selective self-test log data structure revision number 1 Nov 26 17:50:52 Tower preclear_disk-start[2172]: SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS Nov 26 17:50:52 Tower preclear_disk-start[2172]: 1 0 0 Not_testing Nov 26 17:50:52 Tower preclear_disk-start[2172]: 2 0 0 Not_testing Nov 26 17:50:52 Tower preclear_disk-start[2172]: 3 0 0 Not_testing Nov 26 17:50:52 Tower preclear_disk-start[2172]: 4 0 0 Not_testing Nov 26 17:50:52 Tower preclear_disk-start[2172]: 5 0 0 Not_testing Nov 26 17:50:52 Tower preclear_disk-start[2172]: Selective self-test flags (0x0): Entire syslog and smart report is attached just in case. It will be the first parity drive for this new server with my two 2 TB drives. Not testing what and why not? syslog-2010-11-28.txt smart.txt Quote Link to comment
SCSI Posted November 29, 2010 Share Posted November 29, 2010 This is what I got after preclear on a new WD 2TB black. Looks like it is good except for the SMART error. Any suggestions? =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 27C, Elapsed Time: 21:19:57 ============================================================================ == == Disk /dev/sdf has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 19,20c19,20 < Offline data collection status: (0x80) Offline data collection activity < was never started. --- > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15 ============================================================================ Quote Link to comment
PeterB Posted November 29, 2010 Share Posted November 29, 2010 I'm not sure what to make of the data collection never started/suspended, but I had exactly the same SMART report from my WD20EARS (green): S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 97 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 98 I believe that the load_cycle is normal, but I'm puzzled by the change in seek error rate parameters (although the error count is zero?). Quote Link to comment
Joe L. Posted November 29, 2010 Share Posted November 29, 2010 I'm not sure what to make of the data collection never started/suspended, but I had exactly the same SMART report from my WD20EARS (green): S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 97 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 98 I believe that the load_cycle is normal, but I'm puzzled by the change in seek error rate parameters (although the error count is zero?). The value 253 is used by manufacturers as an initial value until the drive is put into use. All you are seeing is the new "starting" value of 200 being instantiated. Perfectly normal. Quote Link to comment
Joe L. Posted November 29, 2010 Share Posted November 29, 2010 This is what I got after preclear on a new WD 2TB black. Looks like it is good except for the SMART error. Any suggestions? =========================================================================== = unRAID server Pre-Clear disk /dev/sdf = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 27C, Elapsed Time: 21:19:57 ============================================================================ == == Disk /dev/sdf has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 19,20c19,20 < Offline data collection status: (0x80) Offline data collection activity < was never started. --- > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 15 ============================================================================ What error? I do not see any. Quote Link to comment
PeterB Posted November 29, 2010 Share Posted November 29, 2010 The value 253 is used by manufacturers as an initial value until the drive is put into use. All you are seeing is the new "starting" value of 200 being instantiated. Perfectly normal. Ah. okay - thanks for the explanation and reassurance! Quote Link to comment
actionfreak Posted November 30, 2010 Share Posted November 30, 2010 Maybe this should go in the support forum but I figured I would post it here first. I have been seeing a lot of drive errors in my Norco 4220 lately. Two of my recent drives start showing errors as soon as I put them in multiple slots. This last drive has failed at exactly 99% of the preclear disk pre-read. The first time my server froze up and was unresponsive and I had to restart it. It is currently in slot 9 if you count from left to right from top to bottom. I also put it in slot 17 with the same result. I tried to preclear it last night and didn't notice anything wrong but woke up this morning to see this in the syslog followed by 2 gigs of drive error logs. Nov 30 05:30:33 Tower kernel: sas: command 0xecd99540, task 0xceea1540, timed out: BLK_EH_NOT_HANDLED Nov 30 05:30:33 Tower kernel: sas: Enter sas_scsi_recover_host Nov 30 05:30:33 Tower kernel: sas: trying to find task 0xceea1540 Nov 30 05:30:33 Tower kernel: sas: sas_scsi_find_task: aborting task 0xceea1540 Nov 30 05:30:33 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1701:mvs_abort_task:rc= 5 Nov 30 05:30:33 Tower kernel: sas: sas_scsi_find_task: querying task 0xceea1540 Nov 30 05:30:33 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1645:mvs_query_task:rc= 5 Nov 30 05:30:33 Tower kernel: sas: sas_scsi_find_task: task 0xceea1540 failed to abort Nov 30 05:30:33 Tower kernel: sas: task 0xceea1540 is not at LU: I_T recover Nov 30 05:30:33 Tower kernel: sas: I_T nexus reset for dev 0700000000000000 Nov 30 05:30:33 Tower kernel: sas: I_T 0700000000000000 recovered Nov 30 05:30:33 Tower kernel: sas: --- Exit sas_scsi_recover_host Nov 30 05:31:04 Tower kernel: sas: command 0xecd99540, task 0xd0c6d900, timed out: BLK_EH_NOT_HANDLED Nov 30 05:31:04 Tower kernel: sas: Enter sas_scsi_recover_host Nov 30 05:31:04 Tower kernel: sas: trying to find task 0xd0c6d900 Nov 30 05:31:04 Tower kernel: sas: sas_scsi_find_task: aborting task 0xd0c6d900 Nov 30 05:31:04 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1701:mvs_abort_task:rc= 5 Nov 30 05:31:04 Tower kernel: sas: sas_scsi_find_task: querying task 0xd0c6d900 Nov 30 05:31:04 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1645:mvs_query_task:rc= 5 Nov 30 05:31:04 Tower kernel: sas: sas_scsi_find_task: task 0xd0c6d900 failed to abort Nov 30 05:31:04 Tower kernel: sas: task 0xd0c6d900 is not at LU: I_T recover Nov 30 05:31:04 Tower kernel: sas: I_T nexus reset for dev 0700000000000000 Nov 30 05:31:04 Tower kernel: sas: I_T 0700000000000000 recovered Nov 30 05:31:04 Tower kernel: sas: --- Exit sas_scsi_recover_host Nov 30 05:31:35 Tower kernel: sas: command 0xecd99540, task 0xd0c6d900, timed out: BLK_EH_NOT_HANDLED Nov 30 05:31:35 Tower kernel: sas: Enter sas_scsi_recover_host Nov 30 05:31:35 Tower kernel: sas: trying to find task 0xd0c6d900 Nov 30 05:31:35 Tower kernel: sas: sas_scsi_find_task: aborting task 0xd0c6d900 Nov 30 05:31:35 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1701:mvs_abort_task:rc= 5 Nov 30 05:31:35 Tower kernel: sas: sas_scsi_find_task: querying task 0xd0c6d900 Nov 30 05:31:35 Tower kernel: /usr/src/sas/trunk/mvsas_tgt/mv_sas.c 1645:mvs_query_task:rc= 5 Nov 30 05:31:35 Tower kernel: sas: sas_scsi_find_task: task 0xd0c6d900 failed to abort Nov 30 05:31:35 Tower kernel: sas: task 0xd0c6d900 is not at LU: I_T recover Nov 30 05:31:35 Tower kernel: sas: I_T nexus reset for dev 0700000000000000 Nov 30 05:31:35 Tower kernel: sas: I_T 0700000000000000 recovered Nov 30 05:31:35 Tower kernel: sas: --- Exit sas_scsi_recover_host Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5.00: device reported invalid CHS sector 0 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] Result: hostbyte=0x00 driverbyte=0x08 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] Sense Key : 0xb [current] [descriptor] Nov 30 05:31:58 Tower kernel: Descriptor sense data with sense descriptors (in hex): Nov 30 05:31:58 Tower kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Nov 30 05:31:58 Tower kernel: 00 00 00 f6 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] ASC=0x0 ASCQ=0x0 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] CDB: cdb[0]=0x28: 28 00 e7 30 fe f8 00 02 00 00 Nov 30 05:31:58 Tower kernel: end_request: I/O error, dev sdf, sector 3878747896 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843487 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843488 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843489 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843490 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843491 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843492 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843493 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843494 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843495 Nov 30 05:31:58 Tower kernel: Buffer I/O error on device sdf, logical block 484843496 Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] Result: hostbyte=0x00 driverbyte=0x08 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] Sense Key : 0xb [current] [descriptor] Nov 30 05:31:58 Tower kernel: Descriptor sense data with sense descriptors (in hex): Nov 30 05:31:58 Tower kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Nov 30 05:31:58 Tower kernel: 00 00 00 f6 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] ASC=0x0 ASCQ=0x0 Nov 30 05:31:58 Tower kernel: sd 2:0:4:0: [sdf] CDB: cdb[0]=0x28: 28 00 e7 30 fe f8 00 00 08 00 Nov 30 05:31:58 Tower kernel: end_request: I/O error, dev sdf, sector 3878747896 Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Nov 30 05:31:58 Tower kernel: ata5: translated ATA stat/err 0x41/04 to SCSI SK/ASC/ASCQ 0xb/00/00 Nov 30 05:31:58 Tower kernel: ata5: status=0x41 { DriveReady Error } Nov 30 05:31:58 Tower kernel: ata5: error=0x04 { DriveStatusError } Quote Link to comment
actionfreak Posted November 30, 2010 Share Posted November 30, 2010 Also, when I start the preclear, I see this log. Nov 30 07:48:56 Tower preclear_disk-start[4093]: A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. Quote Link to comment
Joe L. Posted November 30, 2010 Share Posted November 30, 2010 Also, when I start the preclear, I see this log. Nov 30 07:48:56 Tower preclear_disk-start[4093]: A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. It is trying to invoke the smartctl program on your drive. The drive is not responding. (for whatever reason) You can try to see if typing smartctl -T permissive -d ata -a /dev/sdf and see if it responds with a smart report. Quote Link to comment
jbuszkie Posted December 2, 2010 Author Share Posted December 2, 2010 Joe, I'm trying to preclear 4 2T samsung drives. 3 are chugging along but one failed right after zeroing. I grabbed the first smart report as the drive, now, is un responsive. There are some errors reported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0 3 Spin_Up_Time 0x0023 066 066 025 Pre-fail Always - 10438 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 181 Unknown_Attribute 0x0022 252 252 000 Old_age Always - 0 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 7 200 Multi_Zone_Error_Rate 0x002a 252 252 000 Old_age Always - 0 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 SMART Error Log Version: 1 ATA Error Count: 7 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d0 01 00 4f c2 00 08 00:00:13.498 SMART READ DATA b0 d0 01 00 4f c2 00 08 00:00:13.498 SMART READ DATA b0 da 00 00 4f c2 00 08 00:00:13.498 SMART RETURN STATUS b0 da 00 00 4f c2 00 08 00:00:13.497 SMART RETURN STATUS ec 00 00 00 00 00 00 08 00:00:13.497 IDENTIFY DEVICE Error 6 occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d1 01 01 4f c2 00 08 00:00:10.913 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 d0 01 00 4f c2 00 08 00:00:10.913 SMART READ DATA b0 da 00 00 4f c2 00 08 00:00:10.912 SMART RETURN STATUS b0 da 00 00 4f c2 00 08 00:00:10.912 SMART RETURN STATUS ec 00 00 00 00 00 00 08 00:00:10.912 IDENTIFY DEVICE Error 5 occurred at disk power-on lifetime: 2 hours (0 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d0 01 00 4f c2 00 08 00:00:08.413 SMART READ DATA b0 d0 01 00 4f c2 00 08 00:00:08.413 SMART READ DATA b0 da 00 00 4f c2 00 08 00:00:08.413 SMART RETURN STATUS b0 da 00 00 4f c2 00 08 00:00:08.412 SMART RETURN STATUS ec 00 00 00 00 00 00 08 00:00:08.412 IDENTIFY DEVICE Error 4 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 00 00 00 00 00 00 08 00:00:07.044 IDENTIFY DEVICE 60 d1 00 18 ea e6 40 08 00:00:07.044 READ FPDMA QUEUED 60 d1 00 18 e9 e6 40 08 00:00:07.044 READ FPDMA QUEUED 60 d1 00 18 e8 e6 40 08 00:00:07.044 READ FPDMA QUEUED 60 d1 00 18 e7 e6 40 08 00:00:07.044 READ FPDMA QUEUED Error 3 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- b0 d1 01 01 4f c2 00 08 00:00:06.651 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 d0 01 00 4f c2 00 08 00:00:06.650 SMART READ DATA b0 da 00 00 4f c2 00 08 00:00:06.650 SMART RETURN STATUS b0 da 00 00 4f c2 00 08 00:00:06.649 SMART RETURN STATUS ec 00 00 00 00 00 00 08 00:00:06.649 IDENTIFY DEVICE SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. I'll try power cycling once the other drives finish (about 2 hours or so) and see if the drive comes back.. and grab another SMART report... but my guess is this drive might be a dud! Do you concur? Quote Link to comment
Joe L. Posted December 2, 2010 Share Posted December 2, 2010 I'm guessing it could just as easily be a loose/bad cable to the drive. But do not touch them now... Only do that after stopping the array cleanly and then powering down. (It could be either the power or data cable, or, if in a drive tray, it might not be seated well in the connectors.) Joe L. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.