June 11, 20179 yr Hello i'm not sure what i might be doing wrong but i keep getting this error. Any help would be great. root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="MakeMKV-RDP" --net="bridge" -e TZ="America/Los_Angeles" -e HOST_OS="unRAID" -e "WIDTH"="1280" -e "HEIGHT"="720" -p 3389:3389/tcp -p 8080:8080/tcp -v "/mnt/user/Downloads/completed/":"/unRaid":rw -v "/mnt/user/appdata/MKV/":"/config":rw --device=/dev/sr0:/dev/sr0 tobbenb/makemkv-rdp 3c62c383d79e632340e145c35e18830888aa56988bcb26425a7ebdd8b743A424 /usr/bin/docker: Error response from daemon: linux runtime spec devices: error gathering device information while adding custom device "/dev/sr0": lstat /dev/sr0: no such file or directory.The command failed.
June 11, 20179 yr I had the same issue as I don't have an optical drive. If this is also your problem remove the /dev/sr0 line from the advanced options. Hope that helps!
June 12, 20179 yr 4 hours ago, mikedpitt420 said: I had the same issue as I don't have an optical drive. If this is also your problem remove the /dev/sr0 line from the advanced options. Hope that helps! How do i access that file it does not create the file or folder so how do i got about editing it? I'm a bit new to this thank you.
June 12, 20179 yr Hit "Advanced View" at the top right, and remove the "extra parameters" line referencing the optical drive like the attached picture. I believe I made the same mistake and it's in this forum post a few pages back. I think that most people use this for use with an optical drive so the author included those parameters. I just use them for ISO and BDMV index files, so my container also failed in this same way as I don't have an optical drive. Edited June 12, 20179 yr by mikedpitt420
June 12, 20179 yr 4 minutes ago, mikedpitt420 said: Hit "Advanced View" at the top right, and remove the "extra parameters" line referencing the optical drive like the attached picture. That worked thank you're a life saver.
June 13, 20179 yr Is the error that states that you have anydvd enabled normal or how do i disable it? Or should i just ignore it?
June 14, 20179 yr Author 12 hours ago, cherritaker said: Is the error that states that you have anydvd enabled normal or how do i disable it? Or should i just ignore it? It's not possible to disable. It means that you use an iso or a folder that has already been ripped and decrypted. So nothing to worry about.
June 16, 20179 yr On 6/14/2017 at 4:47 AM, saarg said: It's not possible to disable. It means that you use an iso or a folder that has already been ripped and decrypted. So nothing to worry about. Ok thank you very much.
July 24, 20178 yr Author 8 minutes ago, RedXon said: Does this work with an USB 3.0 Bluray drive? Yes it should work.
September 17, 20178 yr the license key seems to fail to work now. Every time I start this docker, it replaces settings.conf with a blank file with no key, then when the UI loads it says the license is expired. I also checked and both the settings.conf and screen.conf modify times match the time the docker starts. Is it stuck this way or am I doing something wrong? Edited September 18, 20178 yr by mikedpitt420
September 18, 20178 yr Author I haven't touched it for ages apart from updating the version. I have e entry used it myself and had no problem with the config being blanked. Maybe if you remove it completely and install it again it will work.
September 19, 20178 yr I removed the docker and image and data, reinstalled, and now I don't even have a settings.conf file. It worked and just threw the "this is a 30 day trial" warning. So I suppose this just needs removed and redone every 30 days then?
September 19, 20178 yr 56 minutes ago, mikedpitt420 said: I removed the docker and image and data, reinstalled, and now I don't even have a settings.conf file. It worked and just threw the "this is a 30 day trial" warning. So I suppose this just needs removed and redone every 30 days then? Look here --> http://www.makemkv.com/forum2/viewtopic.php?f=5&t=1053 But I have a script that add a new key to to MakeMKV when I boot my server. //Peter
September 19, 20178 yr Nope still same behavior. When I start the docker it erases settings.conf with a blank file without the key
September 19, 20178 yr Author 5 hours ago, mikedpitt420 said: Nope still same behavior. When I start the docker it erases settings.conf with a blank file without the key You need to supply more info about your setup. Docker template and where stuff are stored. What do you mean by a blank file? Just an empty file or is there content? Provide the output of the below command inside the makemkv appdata folder/config I just tried installing it fresh and have no problems here, so it's related to your setup.
September 19, 20178 yr Apologies. The only thing even slightly different about my setup is I have no optical drive. The docker installs to /mnt/cache/appdata/makemkv. When I install the docker now, there is no settings.conf file at all, and it gives me the 30 day warning. If I then stop the doctor, create a settings.conf file and add the line with the code in it, then restart the docker the settings.conf file reverts to not having the key. Note the modify time for settings.conf in the 2nd set of terminal windows, and you can see it's been modified as the docker starts and the app key is gone
September 19, 20178 yr Author I don't see anything wrong there. I also did not use an optical drive when I tested a new install. Can you post a screenshot of the template for the container and click the Show advanced settings line? Your setting files shows that it was created by makemkv 1.10.5, but a fresh install should say 1.10.7. Have you tried changing some settings the first time the container starts, and then go see if the file exists?
September 19, 20178 yr There's the settings for the template. I'm sorry I don't quite understand what you mean by changing some settings. What should I change?
September 20, 20178 yr Author Go into settings in makemkv the first time it starts and change a setting, hit apply and then check the config folder. Have you tried installing with appdata in a folder you never used before?
November 19, 20178 yr Just to follow up, I just keep reinstalling every 30 days as I still haven't found a way around this.
November 20, 20178 yr Author 41 minutes ago, mikedpitt420 said: Just to follow up, I just keep reinstalling every 30 days as I still haven't found a way around this. You haven't answered my last post, so not easy to help you.
November 20, 20178 yr Honestly wasn't trying to be rude. I just didn't want to put it in a directory of another name so that was my solution. Apologies. If it would help someone else I'd gladly do it.
November 20, 20178 yr Author 8 hours ago, mikedpitt420 said: Honestly wasn't trying to be rude. I just didn't want to put it in a directory of another name so that was my solution. Apologies. If it would help someone else I'd gladly do it. Wouldn't it help you to get it fixed?
December 1, 20178 yr How can i go about getting the USB 3.0 BD-Drive detected mine shows as no drive available. I plugged it and i can hear it spinning the movie but i can't seem to find a way for unraid or MAKeMkv to detect it. Is there a option i have to run on or something? Thanks.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.