HellDiverUK Posted July 26, 2015 Share Posted July 26, 2015 OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported? Quote Link to comment
Squid Posted July 26, 2015 Share Posted July 26, 2015 OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported? Not supported at this time Quote Link to comment
HellDiverUK Posted July 26, 2015 Author Share Posted July 26, 2015 OK, so my cache drive runs pretty warm, because it's rammed up against the CPU heatsink. It's running around 40C normally, but when Plex is transcoding it'll head well up past 55C. It's well within it's operating temp (0-70C), but UnRAID's temp warning keeps going off. I want the temp warning for the HDDs to be around 50C, but the SSD to be 65C. So, how do I change the warning temp for one particular drive? Or is this not supported? Not supported at this time My subtle way of requesting it to be supported. Quote Link to comment
MajorArchitect Posted February 29, 2020 Share Posted February 29, 2020 one way of changing alerts for drive temps is under Settings/Disk Settings Quote Link to comment
MajorArchitect Posted February 29, 2020 Share Posted February 29, 2020 (edited) You should also be able to change it per drive by going to MAIN then clicking the drive and changing the values Click Disk Change Value Edited February 29, 2020 by MajorArchitect 1 Quote Link to comment
JonathanM Posted February 29, 2020 Share Posted February 29, 2020 @MajorArchitect, did you happen to notice the thread you are responding to is almost 5 years old, and the solution has been in place for a while. 1 Quote Link to comment
MajorArchitect Posted February 29, 2020 Share Posted February 29, 2020 @jonathanm Yes. This was the first to pop up on google for me though. After posting here I saw the new thread and posted there as well. I wanted to make sure people can find a solution. I've had unRaid since 2016 but I'm new to posting on the forms, so I'm open to advice. Thanks! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.