CDLehner Posted March 5, 2017 Share Posted March 5, 2017 1 minute ago, CHBMB said: What folder is moonlight in? /mnt/user/unMOVIES/BD Quote Link to comment
CHBMB Posted March 5, 2017 Share Posted March 5, 2017 9 minutes ago, CDLehner said: /mnt/user/unMOVIES/BD I dunno tbh, I'm confused by it all, still think it's a Plex setup issue rather than a fundamental bug.... Quote Link to comment
CDLehner Posted March 5, 2017 Share Posted March 5, 2017 5 minutes ago, CHBMB said: I dunno tbh, I'm confused by it all, still think it's a Plex setup issue rather than a fundamental bug.... I don't disagree; although it was fine, for quite a while. An update, that caught up with me I guess PM'd Quote Link to comment
CHBMB Posted March 5, 2017 Share Posted March 5, 2017 (edited) Going to mark @CDLehner's issue as solved via PM. (movies-BD was mapped to /movies not /movies-BD within Plex) Edited March 5, 2017 by CHBMB Quote Link to comment
CDLehner Posted March 6, 2017 Share Posted March 6, 2017 22 minutes ago, CHBMB said: Going to mark @CDLehner's issue as solved via PM. (movies-BD was mapped to /movies not /movies-BD within Plex) Yes; and many thanks to CHBMB! I think like a lot of guys, who don't understand this stuff...backwards and forwards; it does still confuse me, how the set-up error...could have worked for months, and then not. But...I'm just happy to have it working again. Quote Link to comment
kleyden Posted March 6, 2017 Share Posted March 6, 2017 (edited) @CHBMB I should have known that's what you were looking for...I had recently deleted it from appdata. I've re-installed the docker & it seems to have the proper permissions... root@unLeyden:~# ls -la /mnt/user/appdata/ total 16 drwxrwxrwx 1 nobody users 26 Mar 5 19:27 ./ drwxrwxrwx 1 nobody users 68 Mar 4 00:21 ../ drwxrwxrwx 1 nobody users 14 Mar 5 19:26 PleXa-SauRus2/ BTW, the docker is still not working Edited March 6, 2017 by kleyden Quote Link to comment
CHBMB Posted March 6, 2017 Share Posted March 6, 2017 @kleyden OK, try deleting it again and instead of /mnt/user/ try /mnt/cache as the location Quote Link to comment
kleyden Posted March 6, 2017 Share Posted March 6, 2017 @CHBMB Essentially that's the same appdata folder with a different path; but that did it brother man...plex seems to be functioning as expected again!!! So, does that mean their is still some residual data linked to the initial path, even after I deleted it through MC, that was causing this to not function? Quote Link to comment
CHBMB Posted March 6, 2017 Share Posted March 6, 2017 (edited) It's an issue with the fuse fs on Unraid.... supposed to be fixed and it only seems to affect some users, haven't worked iut why yet though. @kleyden In your Unraid webui settings shares => appdata What have you got set for Use cache disk: and Enable Copy-on-write: ? Edited March 6, 2017 by CHBMB Quote Link to comment
kleyden Posted March 6, 2017 Share Posted March 6, 2017 (edited) shares => appdata Use cache disk: Only Enable Copy-on-write: Auto Edited March 6, 2017 by kleyden Quote Link to comment
binhex Posted March 6, 2017 Share Posted March 6, 2017 9 hours ago, CHBMB said: It's an issue with the fuse fs on Unraid.... supposed to be fixed and it only seems to affect some users, haven't worked iut why yet though. ive raised a bug for this but got bogged down in the toing and froing between LT and myself, it def is a bug that exists, the slightly worrying thing is by default LT suggest a fuse path for appdata (/mnt/user/appdata), i think you chimed in too on this particular issue @CHBMB it might be worth bringing this up again. Quote Link to comment
Positivo58 Posted March 6, 2017 Share Posted March 6, 2017 I went ahead and installed Plex Media Server from linuxserver, but when I run the WebGUI, in the top left-hand corner I get the message: Looking for servers ... A server could not be found. Download and install Plex Media Server, and it will appear here. The following is the Docker Run Command: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="Plex" --net="host" -e TZ="America/Los_Angeles" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="latest" -v "/mnt/user/appdata/plex":"/config":rw linuxserver/plex 4d3227607bcf2f4f482c75ec82da423687926fb03282b645d8ba29c7411d0c7a Also, here's the docker container's log: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 10-adduser: executing... ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We gratefully accept donations at:https://www.linuxserver.io/donations/ ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- [cont-init.d] 10-adduser: exited 0. [cont-init.d] 30-dbus: executing... [cont-init.d] 30-dbus: exited 0. [cont-init.d] 40-chown-files: executing... [cont-init.d] 40-chown-files: exited 0. [cont-init.d] 50-plex-update: executing... ##################################################### # Login via the webui at http://<ip>:32400/web # # and restart the docker, because there was no # # plex token found in the preference file # ##################################################### [cont-init.d] 50-plex-update: exited 0. [cont-init.d] done. [services.d] starting services Starting dbus-daemon Starting Plex Media Server. [services.d] done. dbus[268]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permitted Starting Avahi daemon Found user 'avahi' (UID 106) and group 'avahi' (GID 107). Successfully dropped root privileges. avahi-daemon 0.6.32-rc starting up. No service file found in /etc/avahi/services. *** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. *** socket() failed: Address family not supported by protocol Failed to create IPv6 socket, proceeding in IPv4 only mode socket() failed: Address family not supported by protocol Joining mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1. New relevant interface virbr0.IPv4 for mDNS. Joining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1. New relevant interface docker0.IPv4 for mDNS. Joining mDNS multicast group on interface br0.IPv4 with address 10.134.50.50. New relevant interface br0.IPv4 for mDNS. Network interface enumeration completed. Registering new address record for 192.168.122.1 on virbr0.IPv4. Registering new address record for 172.17.0.1 on docker0.IPv4. Registering new address record for 10.134.50.50 on br0.IPv4. Server startup complete. Host name is NPIC145C8.local. Local service cookie is 341767704. I'm new to unRaid and Docker and I would appreciate any help with this. Thank you. Quote Link to comment
trurl Posted March 6, 2017 Share Posted March 6, 2017 1 hour ago, Positivo58 said: I went ahead and installed Plex Media Server from linuxserver, but when I run the WebGUI, in the top left-hand corner I get the message: Looking for servers ... I get that occasionally, Try closing the Plex webUI and opening it again. If that still doesn't do it, try logging out of Plex and logging in again. Quote Link to comment
Positivo58 Posted March 6, 2017 Share Posted March 6, 2017 30 minutes ago, trurl said: I get that occasionally, Try closing the Plex webUI and opening it again. If that still doesn't do it, try logging out of Plex and logging in again. Hello. I tried your suggestion, but unfortunately, I did not work for me. Thank you. Quote Link to comment
CHBMB Posted March 6, 2017 Share Posted March 6, 2017 43 minutes ago, Positivo58 said: Hello. I tried your suggestion, but unfortunately, I did not work for me. Thank you. Try deleting /mnt/user/appdata/plex and then try again, but this time change /mnt/user/appdata/plex to /mnt/cache/appdata/plex and grab the logs from that initial startup, then if it doesn't work, post them here. Quote Link to comment
Positivo58 Posted March 6, 2017 Share Posted March 6, 2017 1 hour ago, CHBMB said: Try deleting /mnt/user/appdata/plex and then try again, but this time change /mnt/user/appdata/plex to /mnt/cache/appdata/plex and grab the logs from that initial startup, then if it doesn't work, post them here. I went ahead and made the location of the config: root@localhost:# /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/docker run -d --name="Plex" --net="host" -e TZ="America/Los_Angeles" -e HOST_OS="unRAID" -e "PUID"="99" -e "PGID"="100" -e "VERSION"="latest" -v "/mnt/cache/appdata/plex":"/config":rw linuxserver/plex 707aa47c6c81405099befb5ac336ca504d4451e47a3c415ca5f25b2dca4d216d The command finished successfully! When I ran the WebGUI again, I still have the same issue. Here's the log: ##################################################### # Login via the webui at http://<ip>:32400/web # # and restart the docker, because there was no # # preference file found, possibly first startup. # ##################################################### [cont-init.d] 50-plex-update: exited 0. [cont-init.d] done. [services.d] starting services Starting Plex Media Server. Starting dbus-daemon [services.d] done. dbus[266]: [system] org.freedesktop.DBus.Error.AccessDenied: Failed to set fd limit to 65536: Operation not permitted Starting Avahi daemon Found user 'avahi' (UID 106) and group 'avahi' (GID 107). Successfully dropped root privileges. avahi-daemon 0.6.32-rc starting up. No service file found in /etc/avahi/services. *** WARNING: Detected another IPv4 mDNS stack running on this host. This makes mDNS unreliable and is thus not recommended. *** socket() failed: Address family not supported by protocol Failed to create IPv6 socket, proceeding in IPv4 only mode socket() failed: Address family not supported by protocol Joining mDNS multicast group on interface virbr0.IPv4 with address 192.168.122.1. New relevant interface virbr0.IPv4 for mDNS. Joining mDNS multicast group on interface docker0.IPv4 with address 172.17.0.1. New relevant interface docker0.IPv4 for mDNS. Joining mDNS multicast group on interface br0.IPv4 with address 10.134.50.50. New relevant interface br0.IPv4 for mDNS. Network interface enumeration completed. Registering new address record for 192.168.122.1 on virbr0.IPv4. Registering new address record for 172.17.0.1 on docker0.IPv4. Registering new address record for 10.134.50.50 on br0.IPv4. Server startup complete. Host name is NPIC145C8.local. Local service cookie is 1765669136. Exception AttributeError: "'ZipArchive' object has no attribute '_zip'" in <bound method ZipArchive.__del__ of <Framework.components.data.ZipArchive object at 0x2b7d9a882190>> ignored Quote Link to comment
CHBMB Posted March 7, 2017 Share Posted March 7, 2017 @Positivo58's issue is solved, as it turns out it was an issue with the VLAN/network setup preventing PMS from pulling the Plex token initially. 1 Quote Link to comment
brimnac Posted March 8, 2017 Share Posted March 8, 2017 Hi - forgive my ignorance on this, and accept apologies in advance if I'm doing anything wrong. I looked (briefly, admittedly) to see if anyone else was experiencing this. I had to redo my Plex a while back, and it seems like the system now uses 100% of the CPU 100% of the time, once Plex is started. I have a gigantic library, so it could be updating stuff like thumbnails, but my drive isn't getting any smaller. I'm using Unassigned Devices to mount an SSD for Plex only. It's set as a Slave in the docker. If log files or whatever are needed, let me know what settings to turn on for the logging and I'll include those. If someone else has awareness, or this is answered earlier in the thread, thank you to anyone who can assist. Quote Link to comment
CHBMB Posted March 8, 2017 Share Posted March 8, 2017 The generation of metadata, chapter icons, all sorts of things, best idea would be to carefully sift through the Plex settings as it'll be something in there no doubt. Quote Link to comment
mlounsbury Posted March 8, 2017 Share Posted March 8, 2017 (edited) Not sure if there's an answer to this, and I know not everyone has Plex Pass, but is there an option for us to be able to do post processing of DVR'd shows? I know that there's an option for a post processing script in the DVR section, and there's some guides out there that show how to do it with MCEBuddy and Comskip and a post processing script, but I think that only really applies to people running it on Windows, Linux, or Mac. Are we out in the cold when it comes to this, and our only real option is to come up with something outside of Plex that removes the commercials from shows after Plex has recorded the show and puts it into the library? EDIT: Guess I should have searched the thread first, looks like someone asked a few months ago: Edited March 8, 2017 by mlounsbury Searched the thread and found the answer Quote Link to comment
leejbarker Posted March 8, 2017 Share Posted March 8, 2017 I've just started using Plex Docker on Unraid. Plex version 1.4.3.3433. Upon adding fresh media everything works fine. However, when I restart the server, the media won't play. It is still recognised by Plex (showing in the library), but simply won't play. I try restarting the docker etc but that still doesn't work. Interestingly, everything seemed to be working fine in LimeTech version of Plex Docker, which I think is 1.3 ****, so might be a fault on the Plex end. Does anyone have any suggestions? Quote Link to comment
leejbarker Posted March 8, 2017 Share Posted March 8, 2017 11 minutes ago, leejbarker said: I've just started using Plex Docker on Unraid. Plex version 1.4.3.3433. Upon adding fresh media everything works fine. However, when I restart the server, the media won't play. It is still recognised by Plex (showing in the library), but simply won't play. I try restarting the docker etc but that still doesn't work. Interestingly, everything seemed to be working fine in LimeTech version of Plex Docker, which I think is 1.3 ****, so might be a fault on the Plex end. Does anyone have any suggestions? Ok, I've fixed my error. I had previously set my Transcoding folder to use RAM instead of the Cache. I looked through the Plex Server log and saw there was a permission error on the Transcoding part. I changed the Transcoding folder to the Cache / Appdata folder and it's working normally again. Quote Link to comment
saarg Posted March 8, 2017 Share Posted March 8, 2017 13 hours ago, mlounsbury said: Not sure if there's an answer to this, and I know not everyone has Plex Pass, but is there an option for us to be able to do post processing of DVR'd shows? I know that there's an option for a post processing script in the DVR section, and there's some guides out there that show how to do it with MCEBuddy and Comskip and a post processing script, but I think that only really applies to people running it on Windows, Linux, or Mac. Are we out in the cold when it comes to this, and our only real option is to come up with something outside of Plex that removes the commercials from shows after Plex has recorded the show and puts it into the library? EDIT: Guess I should have searched the thread first, looks like someone asked a few months ago: There is a possibility to run a post process script for the DVR version I'm told and you can use it on unraid. We have not added comskip to Plex as Plex doesn't support the comskip file that tells the player where to jump to. Comskip doesn't cut the recorded files at all. It just writes it to an index file for the player to read. Mcebuddy is windows only as far as I know. Quote Link to comment
Banderaz Posted March 8, 2017 Share Posted March 8, 2017 Hi, just migrated to unraid 6.3.2 after been on 5.0.5 for a very long time Trying to add this Plex docker, but when adding https://hub.docker.com/r/linuxserver/plex/ (from first post) to the list of Template repositories, I do not get any new Plex mediaservers, just the default from LimeTech (who aparently do not update plex any more) Can someone please point me in the right direction? Thank you Quote Link to comment
Squid Posted March 8, 2017 Share Posted March 8, 2017 (edited) Install Community Applications The notion of repositories isn't really used anymore within unRaid (and that's not the repository URL that you posted) Edited March 8, 2017 by Squid 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.