Dephcon Posted February 5, 2016 Share Posted February 5, 2016 I see there was an update to the container, it's grabbing packages but it dies after "reading package list" ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We do accept donations at: https://www.linuxserver.io/donations ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- finding fastest mirror 1. ubuntu.mirror.rafal.ca Latency: 16 ms Org: None Status: Up to date Speed: 10 Mbps 2. archive.ubuntu.mirror.rafal.ca (current) Latency: 16 ms Org: Rafa? Rzeczkowski Status: Up to date Speed: 1 Gbps 3. mirror.csclub.uwaterloo.ca Latency: 30 ms Org: University of Waterloo Computer Science Club Status: Up to date Speed: 1 Gbps New config file saved to /defaults/sources.list We are now refreshing packages from apt repositories, this *may* take a while Ign http://ubuntu.mirror.rafal.ca trusty InRelease Get:1 http://ubuntu.mirror.rafal.ca trusty-updates InRelease [64.4 kB] Get:2 http://ubuntu.mirror.rafal.ca trusty-security InRelease [64.4 kB] Get:3 http://ubuntu.mirror.rafal.ca trusty Release.gpg [933 B] Get:4 http://ubuntu.mirror.rafal.ca trusty Release [58.5 kB] Get:5 http://ubuntu.mirror.rafal.ca trusty-updates/main Sources [313 kB] Hit http://ppa.launchpad.net trusty InRelease Get:6 http://ubuntu.mirror.rafal.ca trusty-updates/restricted Sources [5,219 B] Get:7 http://ubuntu.mirror.rafal.ca trusty-updates/universe Sources [186 kB] Get:8 http://ubuntu.mirror.rafal.ca trusty-updates/multiverse Sources [5,113 B] Get:9 http://ubuntu.mirror.rafal.ca trusty-updates/main amd64 Packages [875 kB] Hit http://ppa.launchpad.net trusty/main amd64 Packages Get:10 http://ubuntu.mirror.rafal.ca trusty-updates/restricted amd64 Packages [23.4 kB] Get:11 http://ubuntu.mirror.rafal.ca trusty-updates/universe amd64 Packages [436 kB] Get:12 http://ubuntu.mirror.rafal.ca trusty-updates/multiverse amd64 Packages [14.1 kB] Get:13 http://ubuntu.mirror.rafal.ca trusty-security/main Sources [129 kB] Get:14 http://ubuntu.mirror.rafal.ca trusty-security/restricted Sources [3,920 B] Get:15 http://ubuntu.mirror.rafal.ca trusty-security/universe Sources [37.9 kB] Get:16 http://ubuntu.mirror.rafal.ca trusty-security/multiverse Sources [2,164 B] Get:17 http://ubuntu.mirror.rafal.ca trusty-security/main amd64 Packages [517 kB] Get:18 http://ubuntu.mirror.rafal.ca trusty-security/restricted amd64 Packages [20.2 kB] Get:19 http://ubuntu.mirror.rafal.ca trusty-security/universe amd64 Packages [160 kB] Get:20 http://ubuntu.mirror.rafal.ca trusty-security/multiverse amd64 Packages [4,643 B] Get:21 http://ubuntu.mirror.rafal.ca trusty/main Sources [1,335 kB] Get:22 http://ubuntu.mirror.rafal.ca trusty/restricted Sources [5,335 B] Get:23 http://ubuntu.mirror.rafal.ca trusty/universe Sources [7,926 kB] Get:24 http://ubuntu.mirror.rafal.ca trusty/multiverse Sources [211 kB] Get:25 http://ubuntu.mirror.rafal.ca trusty/main amd64 Packages [1,743 kB] Get:26 http://ubuntu.mirror.rafal.ca trusty/restricted amd64 Packages [16.0 kB] Get:27 http://ubuntu.mirror.rafal.ca trusty/universe amd64 Packages [7,589 kB] Get:28 http://ubuntu.mirror.rafal.ca trusty/multiverse amd64 Packages [169 kB] Fetched 21.9 MB in 3s (7,128 kB/s) Reading package lists... So if I delete the container and the image, couchpotato will boot up. BUT if I stop/restart the container the same shit happens with it dying after updating the repos. Quote Link to comment
CHBMB Posted February 5, 2016 Share Posted February 5, 2016 I see there was an update to the container, it's grabbing packages but it dies after "reading package list" ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We do accept donations at: https://www.linuxserver.io/donations ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- finding fastest mirror 1. ubuntu.mirror.rafal.ca Latency: 16 ms Org: None Status: Up to date Speed: 10 Mbps 2. archive.ubuntu.mirror.rafal.ca (current) Latency: 16 ms Org: Rafa? Rzeczkowski Status: Up to date Speed: 1 Gbps 3. mirror.csclub.uwaterloo.ca Latency: 30 ms Org: University of Waterloo Computer Science Club Status: Up to date Speed: 1 Gbps New config file saved to /defaults/sources.list We are now refreshing packages from apt repositories, this *may* take a while Ign http://ubuntu.mirror.rafal.ca trusty InRelease Get:1 http://ubuntu.mirror.rafal.ca trusty-updates InRelease [64.4 kB] Get:2 http://ubuntu.mirror.rafal.ca trusty-security InRelease [64.4 kB] Get:3 http://ubuntu.mirror.rafal.ca trusty Release.gpg [933 B] Get:4 http://ubuntu.mirror.rafal.ca trusty Release [58.5 kB] Get:5 http://ubuntu.mirror.rafal.ca trusty-updates/main Sources [313 kB] Hit http://ppa.launchpad.net trusty InRelease Get:6 http://ubuntu.mirror.rafal.ca trusty-updates/restricted Sources [5,219 B] Get:7 http://ubuntu.mirror.rafal.ca trusty-updates/universe Sources [186 kB] Get:8 http://ubuntu.mirror.rafal.ca trusty-updates/multiverse Sources [5,113 B] Get:9 http://ubuntu.mirror.rafal.ca trusty-updates/main amd64 Packages [875 kB] Hit http://ppa.launchpad.net trusty/main amd64 Packages Get:10 http://ubuntu.mirror.rafal.ca trusty-updates/restricted amd64 Packages [23.4 kB] Get:11 http://ubuntu.mirror.rafal.ca trusty-updates/universe amd64 Packages [436 kB] Get:12 http://ubuntu.mirror.rafal.ca trusty-updates/multiverse amd64 Packages [14.1 kB] Get:13 http://ubuntu.mirror.rafal.ca trusty-security/main Sources [129 kB] Get:14 http://ubuntu.mirror.rafal.ca trusty-security/restricted Sources [3,920 B] Get:15 http://ubuntu.mirror.rafal.ca trusty-security/universe Sources [37.9 kB] Get:16 http://ubuntu.mirror.rafal.ca trusty-security/multiverse Sources [2,164 B] Get:17 http://ubuntu.mirror.rafal.ca trusty-security/main amd64 Packages [517 kB] Get:18 http://ubuntu.mirror.rafal.ca trusty-security/restricted amd64 Packages [20.2 kB] Get:19 http://ubuntu.mirror.rafal.ca trusty-security/universe amd64 Packages [160 kB] Get:20 http://ubuntu.mirror.rafal.ca trusty-security/multiverse amd64 Packages [4,643 B] Get:21 http://ubuntu.mirror.rafal.ca trusty/main Sources [1,335 kB] Get:22 http://ubuntu.mirror.rafal.ca trusty/restricted Sources [5,335 B] Get:23 http://ubuntu.mirror.rafal.ca trusty/universe Sources [7,926 kB] Get:24 http://ubuntu.mirror.rafal.ca trusty/multiverse Sources [211 kB] Get:25 http://ubuntu.mirror.rafal.ca trusty/main amd64 Packages [1,743 kB] Get:26 http://ubuntu.mirror.rafal.ca trusty/restricted amd64 Packages [16.0 kB] Get:27 http://ubuntu.mirror.rafal.ca trusty/universe amd64 Packages [7,589 kB] Get:28 http://ubuntu.mirror.rafal.ca trusty/multiverse amd64 Packages [169 kB] Fetched 21.9 MB in 3s (7,128 kB/s) Reading package lists... So if I delete the container and the image, couchpotato will boot up. BUT if I stop/restart the container the same shit happens with it dying after updating the repos. From talking to Sparklyballs about this he's aware of a problem with pip and is looking at a possible fix, bear with us.... Quote Link to comment
CHBMB Posted February 6, 2016 Share Posted February 6, 2016 So if I delete the container and the image, couchpotato will boot up. BUT if I stop/restart the container the same shit happens with it dying after updating the repos. New Couchpotato build should be up to fix this now.. Quote Link to comment
huladaddy Posted February 6, 2016 Share Posted February 6, 2016 General question... What should we do about apps like couchpotato that have their own internal updating mechanism... What happens when couchpotato updates itself, then there is a container update? Should we force couchpotato (and others like sickrage, etc.) to not automatically update themselves? Quote Link to comment
mr-hexen Posted February 6, 2016 Share Posted February 6, 2016 General question... What should we do about apps like couchpotato that have their own internal updating mechanism... What happens when couchpotato updates itself, then there is a container update? Should we force couchpotato (and others like sickrage, etc.) to not automatically update themselves? Correct, you do not want the App auto-updating itself. If CP announces to you there's an update, just restart the docker. This ensures the docker container is shutdown correctly during the restart process. Quote Link to comment
kostecki Posted February 6, 2016 Share Posted February 6, 2016 My guess is that this is a CP bug that it must be a non-zero number. That seems like a fair guess. Hopefully it'll be fixed at some point, but i can live with kinda-working. Thanks to both of you, mr-hexen and CHBMB! Quote Link to comment
Dephcon Posted February 7, 2016 Share Posted February 7, 2016 New Couchpotato build should be up to fix this now.. confirmed working, thanks. Quote Link to comment
hernandito Posted February 8, 2016 Share Posted February 8, 2016 I just encountered an issue where my Docker Utilization was way up. I followed the instructions on this post: http://lime-technology.com/forum/index.php?topic=45249.msg439980#msg439980 And listed that I had 2 entries from CP docker that were 18GB. I deleted the log file per the post. After roughly 90 minutes, I checked again and I see that the CP log file is already up to 323MB. Is there a way to "fix" this other than running the log deletion script? Is anyone elses log files for CP that big? I do have roughly 152 in my wanted movies list and 8 NZB indexers set up in CP. I do not use torrents w/ CP. Could it be that this is unusually high? Thanks, H. Quote Link to comment
mr-hexen Posted February 8, 2016 Share Posted February 8, 2016 I just encountered an issue where my Docker Utilization was way up. I followed the instructions on this post: http://lime-technology.com/forum/index.php?topic=45249.msg439980#msg439980 And listed that I had 2 entries from CP docker that were 18GB. I deleted the log file per the post. After roughly 90 minutes, I checked again and I see that the CP log file is already up to 323MB. Is there a way to "fix" this other than running the log deletion script? Is anyone elses log files for CP that big? I do have roughly 152 in my wanted movies list and 8 NZB indexers set up in CP. I do not use torrents w/ CP. Could it be that this is unusually high? Thanks, H. Do you have debugging turned on in the CP Settings?? Quote Link to comment
hernandito Posted February 8, 2016 Share Posted February 8, 2016 I just encountered an issue where my Docker Utilization was way up. I followed the instructions on this post: http://lime-technology.com/forum/index.php?topic=45249.msg439980#msg439980 And listed that I had 2 entries from CP docker that were 18GB. I deleted the log file per the post. After roughly 90 minutes, I checked again and I see that the CP log file is already up to 323MB. Is there a way to "fix" this other than running the log deletion script? Is anyone elses log files for CP that big? I do have roughly 152 in my wanted movies list and 8 NZB indexers set up in CP. I do not use torrents w/ CP. Could it be that this is unusually high? Thanks, H. Do you have debugging turned on in the CP Settings?? Debuggig and Development are both unchecked. Quote Link to comment
hernandito Posted February 8, 2016 Share Posted February 8, 2016 Two hours after my post above the log is at 750MB Quote Link to comment
Nem Posted February 8, 2016 Share Posted February 8, 2016 how would I migrate from needo's couchpotato to this one? Can I simply create the new container and move the files over from my cache drive? Quote Link to comment
hernandito Posted February 8, 2016 Share Posted February 8, 2016 how would I migrate from needo's couchpotato to this one? Can I simply create the new container and move the files over from my cache drive? I would COPY the needo files in case there are some differences. In fact, you could run both versions at the same time, provided you are pointing to different different /conf folders and have diferent external ports. For example.... if you files are currently in /mnt/cache/appdata/couchpotato Copy that folder so you have something like /mnt/cache/appdata/couchpotato2 POint the needo /config to /mnt/cache/appdata/couchpotato Point the linuxserver /config to /mnt/cache/appdata/couchpotato2 Remember to give them different external ports. This way, you can even copy the setting of one to the other in case the old files dont work with the new ones. Quote Link to comment
ciarlill Posted February 12, 2016 Share Posted February 12, 2016 I had a problem with the logs growing like crazy, but it was because I left auto-update enabled. This was causing it download an update, and try to run the daemon for the new version. It could not launch because 5050 was still in use by the last process. So it just kept try to re-launch the updated version over and over constantly. I disabled the auto-update and restarted the docker and all looks good now. EDIT: Looks like this may not have had to do with auto-update, but rather restarting CPS from the WebUI. Instead, restart the docker. Quote Link to comment
nu11P4nD4 Posted February 18, 2016 Share Posted February 18, 2016 I'm having a problem with CouchPotato passing the movie category to NZBGet so my movies aren't flagged as movies. This is causing all downloads that CouchPotato sends to NZBGet to save to the /mnt/cache/Download instead of /mnt/cache/Download/completed/Movies. However if i move the files from /mnt/cache/Download to /mnt/cache/download/Dompleted/Movies CouchPotato will post process them correctly. Here's my config for CouchPotato [nzbget] username = nzbget category = Movies delete_failed = True manual = 0 enabled = 1 priority = 0 ssl = 0 host = http://10.10.10.10:8001/ password = Here's the config in NZBGet: Category1.Name=Movies Category1.DestDir=${MainDir}/completed/Movies Category1.Unpack=yes Category1.PostScript= Category1.Aliases=movies Screenshot of docker mapping attached. Headphones and Sonarr are sending categories properly.. Any thoughts? Quote Link to comment
CHBMB Posted February 18, 2016 Share Posted February 18, 2016 Dunno if the trailing slash will make any difference in the CP docker download mappings other than that no. It does work, so it must be something you've misconfigured. Quote Link to comment
nu11P4nD4 Posted February 18, 2016 Share Posted February 18, 2016 Corrected the / but i'm still running into the issue.. Everything works, the nzb files are sent to NZBGet and download properly, they just default to no category and aren't sorted... never had this issue with sab which i've been running for 6 years.. I might have to go back Quote Link to comment
CHBMB Posted February 18, 2016 Share Posted February 18, 2016 Corrected the / but i'm still running into the issue.. Everything works, the nzb files are sent to NZBGet and download properly, they just default to no category and aren't sorted... never had this issue with sab which i've been running for 6 years.. I might have to go back It does work with NZBGet and Couch, so it has to be the way you've set it up. I'm working at the moment, so can't really offer much more at the moment I'm afraid. Quote Link to comment
Squid Posted February 18, 2016 Share Posted February 18, 2016 Corrected the / but i'm still running into the issue.. Everything works, the nzb files are sent to NZBGet and download properly, they just default to no category and aren't sorted... never had this issue with sab which i've been running for 6 years.. I might have to go back Based upon your config files, it should be working (assuming ${MainDir} is set correctly). I know that it works no problems whatsoever if you don't give it a full path for the destination, and just rather set nzbget to automatically append the category to {DestDir} Quote Link to comment
nu11P4nD4 Posted February 19, 2016 Share Posted February 19, 2016 Sorry, I've been busy with work. So the issue seems to have resolved itself...I turned off NZBGet, turned the SAB switch on, had a few SAB downloads fail cause I don't have it installed. Turned off SAB and reenabled NZBGet.. definitely a glitch in the matrix.. confuses the hell out of me but it work! NZBGet downloads are now being flagged as Movies i'm a happy camper. thanks guys Quote Link to comment
CHBMB Posted February 19, 2016 Share Posted February 19, 2016 Turn it on and off again...... Quote Link to comment
sparklyballs Posted February 19, 2016 Share Posted February 19, 2016 Turn it on and off again...... but then it'd be off. Quote Link to comment
CHBMB Posted February 19, 2016 Share Posted February 19, 2016 Turn it on and off again...... but then it'd be off. Nobody likes a smart arse.... You're clearly feeling better then. Quote Link to comment
splnut Posted February 24, 2016 Share Posted February 24, 2016 When I checked out my Unraid server today I noticed CouchPotato was not running. I stopped/started, deleted/re-downloaded and deleted config folder. Any suggestions on what could be causing this? Docker Logs: root@Tower:~# docker logs CouchPotato *** Running /etc/my_init.d/00_regen_ssh_host_keys.sh... *** Running /etc/my_init.d/10_add_user_abc.sh... ------------------------------------- _ _ _ | |___| (_) ___ | / __| | |/ _ \ | \__ \ | | (_) | |_|___/ |_|\___/ |_| Brought to you by linuxserver.io We do accept donations at: https://www.linuxserver.io/donations ------------------------------------- GID/UID ------------------------------------- User uid: 99 User gid: 100 ------------------------------------- *** Running /etc/my_init.d/20_apt_update.sh... finding fastest mirror Getting list of mirrors...done. Testing 73 mirror(s) [60/73] 82% connection to ftp.unina.it: [Errno 111] Connection refused [73/73] 100% Getting list of launchpad URLs...done. Looking up 3 status(es) [3/3] 100% 1. cosmos.cites.illinois.edu Latency: 32 ms Org: University of Illinois Status: Up to date Speed: 100 Mbps 2. mirrors.usinternet.com Latency: 36 ms Org: US Internet Status: Up to date Speed: 1 Gbps 3. mirror.umd.edu Latency: 40 ms Org: University of Maryland Status: Up to date Speed: 1 Gbps New config file saved to /defaults/sources.list We are now refreshing packages from apt repositories, this *may* take a while Ign http://cosmos.cites.illinois.edu trusty InRelease Get:1 http://cosmos.cites.illinois.edu trusty-updates InRelease [65.9 kB] Get:2 http://ppa.launchpad.net trusty InRelease [15.5 kB] Get:3 http://cosmos.cites.illinois.edu trusty-security InRelease [65.9 kB] Get:4 http://cosmos.cites.illinois.edu trusty Release.gpg [933 B] Get:5 http://cosmos.cites.illinois.edu trusty-updates/main Sources [325 kB] Get:6 http://ppa.launchpad.net trusty/main amd64 Packages [2,942 B] Get:7 http://cosmos.cites.illinois.edu trusty-updates/restricted Sources [5,217 B] Get:8 http://cosmos.cites.illinois.edu trusty-updates/universe Sources [189 kB] Get:9 http://cosmos.cites.illinois.edu trusty-updates/multiverse Sources [5,498 B] Get:10 http://cosmos.cites.illinois.edu trusty-updates/main amd64 Packages [897 kB] Get:11 http://cosmos.cites.illinois.edu trusty-updates/restricted amd64 Packages [23.5 kB] Get:12 http://cosmos.cites.illinois.edu trusty-updates/universe amd64 Packages [ 438 kB] Get:13 http://cosmos.cites.illinois.edu trusty-updates/multiverse amd64 Packages [14.3 kB] Get:14 http://cosmos.cites.illinois.edu trusty Release [58.5 kB] Get:15 http://cosmos.cites.illinois.edu trusty-security/main Sources [132 kB] Get:16 http://cosmos.cites.illinois.edu trusty-security/restricted Sources [3,92 0 B] Get:17 http://cosmos.cites.illinois.edu trusty-security/universe Sources [37.9 k B] Get:18 http://cosmos.cites.illinois.edu trusty-security/multiverse Sources [2,54 8 B] Get:19 http://cosmos.cites.illinois.edu trusty-security/main amd64 Packages [530 kB] Get:20 http://cosmos.cites.illinois.edu trusty-security/restricted amd64 Package s [20.2 kB] Get:21 http://cosmos.cites.illinois.edu trusty-security/universe amd64 Packages [161 kB] Get:22 http://cosmos.cites.illinois.edu trusty-security/multiverse amd64 Package s [4,852 B] Get:23 http://cosmos.cites.illinois.edu trusty/main Sources [1,335 kB] Get:24 http://cosmos.cites.illinois.edu trusty/restricted Sources [5,335 B] Get:25 http://cosmos.cites.illinois.edu trusty/universe Sources [7,926 kB] Get:26 http://cosmos.cites.illinois.edu trusty/multiverse Sources [211 kB] Get:27 http://cosmos.cites.illinois.edu trusty/main amd64 Packages [1,743 kB] Get:28 http://cosmos.cites.illinois.edu trusty/restricted amd64 Packages [16.0 k B] Get:29 http://cosmos.cites.illinois.edu trusty/universe amd64 Packages [7,589 kB ] Get:30 http://cosmos.cites.illinois.edu trusty/multiverse amd64 Packages [169 kB ] Fetched 22.0 MB in 7s (3,113 kB/s) Reading package lists... Preconfiguring packages ... (Reading database ... 23181 files and directories currently installed.) Preparing to unpack .../libssl-dev_1.0.1f-1ubuntu2.17_amd64.deb ... Unpacking libssl-dev:amd64 (1.0.1f-1ubuntu2.17) over (1.0.1f-1ubuntu2.16) ... Preparing to unpack .../libssl1.0.0_1.0.1f-1ubuntu2.17_amd64.deb ... Unpacking libssl1.0.0:amd64 (1.0.1f-1ubuntu2.17) over (1.0.1f-1ubuntu2.16) ... Setting up libssl1.0.0:amd64 (1.0.1f-1ubuntu2.17) ... Setting up libssl-dev:amd64 (1.0.1f-1ubuntu2.17) ... Processing triggers for libc-bin (2.19-0ubuntu6.6) ... *** Running /etc/my_init.d/30_update.sh... Cloning into '/app/couchpotato'... fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. /etc/my_init.d/30_update.sh: line 7: cd: /app/couchpotato: No such file or direc tory fatal: Not a git repository (or any of the parent directories): .git *** /etc/my_init.d/30_update.sh failed with status 128 *** Killing all processes... Quote Link to comment
kgregg Posted February 25, 2016 Share Posted February 25, 2016 long time sickbeard/sonarr/sabnzbd/bittorrent/torguard user on a win10 pc. first time CP user on any platform/OS. for giggles, i installed CP and SAB dockers today. i have the two apps configured but not certain i have CP set to use my acct with toguard when using torrents from KAT or TPB. did not see where to enter torguard userid/password in CP. really need to get the (torrent, not HTTP) proxy dialed in and soon. appreciate any advice. thanks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.