tjb_altf4 Posted May 20, 2018 Share Posted May 20, 2018 Sounds like a configuration problem. CP isn't perfect, but I've never seen the behaviour you describe. Quote Link to comment
jang430 Posted June 18, 2018 Share Posted June 18, 2018 Hi. I recently downloaded this. I am also using linuxserver's Deluge. linuxserver's sonarr connects to linuxserver's deluge properly. but linuxserver's couchpotato cannot "see" deluge. Deluge's network type is set to Host, is that right? My Unraid's IP is 192.168.1.104, using port 8112. Instead of using localhost:588xx, I'm using 192.168.1.104:8112 for my Deluge setting. Username I used is admin, password, I have since changed to blank. I've also added label to couchpotato movies. Same goes in Deluge. Any ideas? Quote Link to comment
jang430 Posted June 18, 2018 Share Posted June 18, 2018 Anyone?Sent from my iPhone using Tapatalk Quote Link to comment
sparklyballs Posted June 18, 2018 Share Posted June 18, 2018 (edited) 17 hours ago, jang430 said: Hi. I recently downloaded this. I am also using linuxserver's Deluge. linuxserver's sonarr connects to linuxserver's deluge properly. but linuxserver's couchpotato cannot "see" deluge. Deluge's network type is set to Host, is that right? My Unraid's IP is 192.168.1.104, using port 8112. Instead of using localhost:588xx, I'm using 192.168.1.104:8112 for my Deluge setting. Username I used is admin, password, I have since changed to blank. I've also added label to couchpotato movies. Same goes in Deluge. Any ideas? make a user for deluge as per the Add User to the authentication file section here https://dev.deluge-torrent.org/wiki/UserGuide/ThinClient#AddUsertotheauthenticationfile the file being in /config/auth set remote connections on in deluge via the webui then restart the deluge docker (screenie shows it off which is wrong, lol) then in couch use 58846 and the credentials to match the deluge user Edited June 18, 2018 by sparklyballs Quote Link to comment
jang430 Posted June 18, 2018 Share Posted June 18, 2018 (edited) hi @sparklyballs, I think this is the command I should be running? echo "alice:MyC0mpL3xPass:10" >> ~/.config/deluge/auth How do I run it inside the docker app? Edit: I found this- docker exec -it deluge echo "alice:MyC0mpL3xPass:10" >> ~/.config/deluge/auth Is this correct? Thanks Edited June 18, 2018 by jang430 Quote Link to comment
CHBMB Posted June 19, 2018 Share Posted June 19, 2018 1 hour ago, jang430 said: hi @sparklyballs, I think this is the command I should be running? echo "alice:MyC0mpL3xPass:10" >> ~/.config/deluge/auth How do I run it inside the docker app? Edit: I found this- docker exec -it deluge echo "alice:MyC0mpL3xPass:10" >> ~/.config/deluge/auth Is this correct? Thanks Quote Link to comment
jang430 Posted June 19, 2018 Share Posted June 19, 2018 Sorry, I'm lost with @sparklyballsinstructions as to how to add a deluge user, with the deluge app being in a docker container. Kindly point out. I'd also like to let you know that deluge with Sonarr is working fine, and can communicate, and send torrents to deluge properly. CP can't see deluge. @CHBMB, sorry I totally didn't understand what you're pointing out with the link above. Quote Link to comment
JonathanM Posted June 19, 2018 Share Posted June 19, 2018 1 hour ago, jang430 said: Sorry, I'm lost with @sparklyballsinstructions as to how to add a deluge user, with the deluge app being in a docker container. Look in your appdata deluge folder. Is the auth file not right there? I think you are way over-complicating things. Quote Link to comment
CHBMB Posted June 19, 2018 Share Posted June 19, 2018 6 hours ago, jang430 said: Sorry, I'm lost with @sparklyballsinstructions as to how to add a deluge user, with the deluge app being in a docker container. Kindly point out. I'd also like to let you know that deluge with Sonarr is working fine, and can communicate, and send torrents to deluge properly. CP can't see deluge. @CHBMB, sorry I totally didn't understand what you're pointing out with the link above. Did you click on the bit in the red box. Step by step instructions to do what you want. Quote Link to comment
jang430 Posted June 20, 2018 Share Posted June 20, 2018 @jonathanm, thanks, I indeed overthinked it @CHBMB, sorry, I didn't. Instead, I clicked on ? . Your instructions did the trick. Do I need to change write permissions if downloaded with the new username and password that I created? I used xxxxx:xxxxxx:10. Will I have problems moving files here and there? Permission issues? Last question, Sonarr currently connecting to Deluge with default admin as username, and password. Do I have to change it? Although I confirmed it's connecting as it is. Quote Link to comment
jang430 Posted June 20, 2018 Share Posted June 20, 2018 I have my Sabnzbd download to /downloads/, which, in my case, is /mnt/user/appdata/downloads/. So when Sonarr finds NZBs, it sends to Sab, and downloads to that folder. After which, Sonarr picks it up during post process. In Deluge, I transfer completed downloads to /downloads/ as well, using the same folder. It's still being picked up by Sonarr. I read that we have to be consistent, hence, in CP, I also use /downloads/, so it can be picked up during post process. Won't there be any chance wherein Sonarr and CP both see the same files, and there might be an occassion that it's the same title? E.g. Suits TV show, and just in case, there is another Suits The Movie. What's the best practice? Will it be possible to have CP monitor /downloads/Couchpotato? And have Deluge download all shows labelled Movies to /downloads/ Couchpotato? Quote Link to comment
jang430 Posted June 23, 2018 Share Posted June 23, 2018 Hi. Don't know where exactly to post, so I'll ask here. I'm using CP/ Deluge. I have CP searching for movies via magnetdl, and rarbg. When it finds one, it sends it to Deluge for download. In my Deluge, I have files downloading at /downloads/deluge/temp, and CP label of movies get moved to /downloads/couchpotato/complete upon completion. I have in my CP renamer settings to rename movies from /downloads/couchpotato/complete/ to /movies (a share on my array). The movie gets downloaded, and Movie appears in /downloads/couchpotato/complete/, CP sees it, ang moves it to /movies (share), but on an occasion or two, the main movie isn't there. All the other nfo files, that come with the folder is there, but the main movie is neither in /movies (share) nor /downloads/couchpotato/complete/. But I did see it finish download. Don't know where to start troubleshooting. Hope you can shed some light. Deluge settings: Stop seeding when ratio reaches: 0 CP Downloader settings: Deluge is checked Lablel: movies Directory: left blank Completed Directory: left blank Remove Torrent: unticked Remove Files: unticked Quote Link to comment
bdee1 Posted September 11, 2018 Share Posted September 11, 2018 (edited) for while now, whenever I launch couchpotato, i just get the left navbar and the right side is just blank white. If I try to add a movie, it says "movie didn't add properly, check logs" when i look in the logs, its chock full of errors. below is a small sample. any idea how to troubleshoot this? 09-10 20:11:01 ERROR [31m[tato.core.plugins.renamer] Failed checking snatched: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/renamer.py", line 956, in checkSnatched rels = list(fireEvent('release.with_status', ['snatched', 'seeding', 'missing'], single = True)) File "/app/couchpotato/couchpotato/core/plugins/release/main.py", line 536, in withStatus for ms in db.get_many('release_status', s): File "/app/couchpotato/libs/CodernityDB/database.py", line 991, in get_many "Index `%s` doesn't exists" % index_name) IndexNotFoundException: Index `release_status` doesn't exists [0m 09-10 20:12:01 ERROR [31m[tato.core.plugins.renamer] Failed checking snatched: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/renamer.py", line 956, in checkSnatched rels = list(fireEvent('release.with_status', ['snatched', 'seeding', 'missing'], single = True)) File "/app/couchpotato/couchpotato/core/plugins/release/main.py", line 536, in withStatus for ms in db.get_many('release_status', s): File "/app/couchpotato/libs/CodernityDB/database.py", line 991, in get_many "Index `%s` doesn't exists" % index_name) IndexNotFoundException: Index `release_status` doesn't exists [0m 09-10 20:13:01 ERROR [31m[tato.core.plugins.renamer] Failed checking snatched: Traceback (most recent call last): File "/app/couchpotato/couchpotato/core/plugins/renamer.py", line 956, in checkSnatched rels = list(fireEvent('release.with_status', ['snatched', 'seeding', 'missing'], single = True)) File "/app/couchpotato/couchpotato/core/plugins/release/main.py", line 536, in withStatus for ms in db.get_many('release_status', s): File "/app/couchpotato/libs/CodernityDB/database.py", line 991, in get_many "Index `%s` doesn't exists" % index_name) IndexNotFoundException: Index `release_status` doesn't exists Edited September 11, 2018 by bdee1 found log files. Quote Link to comment
vurt Posted December 25, 2018 Share Posted December 25, 2018 (edited) <deleted> Edited December 25, 2018 by vurt Quote Link to comment
Lebowski Posted January 13, 2019 Share Posted January 13, 2019 Did anyone else have CP go nuts with CPU usage today? restarting the docker seemed to correct the issue for me. Quote Link to comment
trackstarjc2003 Posted January 15, 2019 Share Posted January 15, 2019 CouchPotato just completely stopped working for me today. The app launches in docker, but I can not get the webpage to come up. Restart, reinstall, reboot, nothing has any effect..... Quote Link to comment
trurl Posted January 15, 2019 Share Posted January 15, 2019 2 minutes ago, trackstarjc2003 said: CouchPotato just completely stopped working for me today. The app launches in docker, but I can not get the webpage to come up. Restart, reinstall, reboot, nothing has any effect..... Tools - Diagnostics, attach complete diagnostics zip file to your next post. Quote Link to comment
trackstarjc2003 Posted January 15, 2019 Share Posted January 15, 2019 38 minutes ago, trurl said: Tools - Diagnostics, attach complete diagnostics zip file to your next post. Attached ehomeserver-diagnostics-20190115-0007.zip Quote Link to comment
Lebowski Posted January 15, 2019 Share Posted January 15, 2019 (edited) I have seen the light and moved over to radarr. Couch served me well. RIP.... Edited January 15, 2019 by Lebowski Quote Link to comment
aptalca Posted January 15, 2019 Share Posted January 15, 2019 We have a new build of couchpotato and we are looking for testers. This is a multi-arch build, meaning x86_64, arm and aarch64 builds are all hosted in the same repo and when you pull latest, your system should automatically get the correct arch. They also use our new build system. If you're willing to test, please first back up your existing config folder, then replace the image linuxserver/couchpotato in container settings with lspipepr/couchpotato and save. Then let us know here if it all goes well. Following successful tests, these builds will be published in the original repo. Thanks Quote Link to comment
trurl Posted January 15, 2019 Share Posted January 15, 2019 10 hours ago, trackstarjc2003 said: Attached ehomeserver-diagnostics-20190115-0007.zip You have a ridiculously large (80G) docker image. This is usually a sign that someone has been filling up their docker image and to solve the problem they increase its size. It will not solve the problem, it just makes it take longer to fill. If you have your applications correctly configured it is very unlikely you would ever need even 20G. See the "Docker Image Filling Up" section of the Docker FAQ: https://forums.unraid.net/topic/57181-real-docker-faq/ Quote Link to comment
trackstarjc2003 Posted January 15, 2019 Share Posted January 15, 2019 1 hour ago, trurl said: You have a ridiculously large (80G) docker image. This is usually a sign that someone has been filling up their docker image and to solve the problem they increase its size. It will not solve the problem, it just makes it take longer to fill. If you have your applications correctly configured it is very unlikely you would ever need even 20G. See the "Docker Image Filling Up" section of the Docker FAQ: https://forums.unraid.net/topic/57181-real-docker-faq/ Yes, it a large docker file. But I don't see how that would prevent CouchPotato from running. Quote Link to comment
trurl Posted January 15, 2019 Share Posted January 15, 2019 23 minutes ago, trackstarjc2003 said: Yes, it a large docker file. But I don't see how that would prevent CouchPotato from running. Filling the docker image sometimes leads to corruption of its filesystem. Quote Link to comment
trackstarjc2003 Posted January 15, 2019 Share Posted January 15, 2019 4 hours ago, trurl said: Filling the docker image sometimes leads to corruption of its filesystem. Yes, but the docker currently only has 8g used. devid 1 size 80.00GiB used 8.02GiB I'm just not sure why/how this is relevant. Quote Link to comment
trackstarjc2003 Posted January 19, 2019 Share Posted January 19, 2019 Installed the Couchpotato app from Binhex today. Its working just fine. There was also an update for the Linuxserverio app, but that did not resolve the issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.