garycase Posted September 1, 2015 Share Posted September 1, 2015 A note was added to the OP pointing to the other announcement thread. Good idea, but it's buried at the very bottom of the fairly long announcement post. Suggest it should be (a) VERY obvious (perhaps larger font); and (b) be at the top of the thread; and © a more aggressive note ==> i.e. instead of "... please see this thread regarding plugin support." something along the lines of "IMPORTANT: Review this thread regarding plugin support in v6.1 BEFORE you upgrade to this version." Quote Link to comment
johnny121b Posted September 1, 2015 Share Posted September 1, 2015 I don't see mention anywhere on a streamlined way of going from 5.06 to 6.1. I know the plugin situation is in disarray right now, and that most/all will not be compatible, but can you still migrate while preserving drive/share info? Quote Link to comment
Squid Posted September 1, 2015 Share Posted September 1, 2015 I don't see mention anywhere on a streamlined way of going from 5.06 to 6.1. I know the plugin situation is in disarray right now, and that most/all will not be compatible, but can you still migrate while preserving drive/share info? http://lime-technology.com/wiki/index.php/Upgrading_to_UnRAID_v6 Quote Link to comment
itimpi Posted September 1, 2015 Share Posted September 1, 2015 I don't see mention anywhere on a streamlined way of going from 5.06 to 6.1. The fastest way is using the plugin option in the GUI. That will automatically disable all existing v5 plugins and add-ons but it will bring forward your disk and basic settings. I know the plugin situation is in disarray right now, and that most/all will not be compatible, but can you still migrate while preserving drive/share info? Yes - that is what doing it via the GUI will achieve. There is also the Upgrade to v6 guide that covers all aspects of upgrading and how to do it manually. In particular it discusses the pros and cons of plugins and dockers which is one area where you need to make decisions for v6. Quote Link to comment
johnny121b Posted September 1, 2015 Share Posted September 1, 2015 Squid- thanks for the reference. I'd seen that. I presume it IS valid for 6 AND 6.1...... Itimpi- I don't remember any "plugin option" in the 5.06 GUI, but I'll look when I get home. Quote Link to comment
itimpi Posted September 1, 2015 Share Posted September 1, 2015 Itimpi- I don't remember any "plugin option" in the 5.06 GUI, but I'll look when I get home. There is the announcement thread covering this method of update. I have never tried it, so I am not sure exactly sure how reliable that method of update is proving to be. Quote Link to comment
niven Posted September 1, 2015 Share Posted September 1, 2015 Thanks! really nice! Quote Link to comment
JimPhreak Posted September 1, 2015 Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Quote Link to comment
smdion Posted September 1, 2015 Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Jim.. are you back on baremetal.. cuz I'm having this as well as a guest on ESXi? Quote Link to comment
JimPhreak Posted September 1, 2015 Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Jim.. are you back on baremetal.. cuz I'm having this as well as a guest on ESXi? Nope, I'm still on ESXi 5.5 as a guest. Quote Link to comment
limetech Posted September 1, 2015 Author Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Jim.. are you back on baremetal.. cuz I'm having this as well as a guest on ESXi? Nope, I'm still on ESXi 5.5 as a guest. You guys maybe try this. Type: /usr/local/emhttp/plugins/dyanmix/scripts/monitor at the console and let's see what it outputs. Quote Link to comment
itimpi Posted September 1, 2015 Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Been lots of reports of this. Normally resolved by Disabling/Enabling notifications via Settings. Quote Link to comment
limetech Posted September 1, 2015 Author Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Been lots of reports of this. Normally resolved by Disabling/Enabling notifications via Settings. Would be nice to know why this happens in a VM. Quote Link to comment
JimPhreak Posted September 1, 2015 Share Posted September 1, 2015 You guys maybe try this. Type: /usr/local/emhttp/plugins/dyanmix/scripts/monitor at the console and let's see what it outputs. I just get the following output: root@SPE-UNRAID:~# /usr/local/emhttp/plugins/dyanmix/scripts/monitor -bash: /usr/local/emhttp/plugins/dyanmix/scripts/monitor: No such file or directory Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Been lots of reports of this. Normally resolved by Disabling/Enabling notifications via Settings. Yes that fixes it. Quote Link to comment
RobJ Posted September 1, 2015 Share Posted September 1, 2015 Would the .../dyanmix/... be the problem? (Dyan Cannon nice, Dyan Mix not so...) Quote Link to comment
smdion Posted September 1, 2015 Share Posted September 1, 2015 Would the .../dyanmix/... be the problem? (Dyan Cannon nice, Dyan Mix not so...) Well... aren't you a keen eye. Nice spot! Quote Link to comment
beire Posted September 1, 2015 Share Posted September 1, 2015 Just updated and seeing this in my logs once every minute: crond[1988]: exit status 127 from user root /usr/local/emhttp/plugins/dyanmix/scripts/monitor &> /dev/null Been lots of reports of this. Normally resolved by Disabling/Enabling notifications via Settings. Would be nice to know why this happens in a VM. Same error on bare metal here. Don't think it's vm esxi related. Upgraded from 6.0 final. Quote Link to comment
bonienl Posted September 1, 2015 Share Posted September 1, 2015 Would the .../dyanmix/... be the problem? (Dyan Cannon nice, Dyan Mix not so...) You hit the nail on the head ... The installation script has a typo (really all of us overlooked this), but RobJ has a keen eye sed -i 's|sbin/monitor|emhttp/plugins/[color=red]dyanmix[/color]/scripts/monitor|g' Quote Link to comment
limetech Posted September 1, 2015 Author Share Posted September 1, 2015 Would the .../dyanmix/... be the problem? (Dyan Cannon nice, Dyan Mix not so...) You hit the nail on the head ... The installation script has a typo (really all of us overlooked this), but RobJ has a keen eye sed -i 's|sbin/monitor|emhttp/plugins/[color=red]dyanmix[/color]/scripts/monitor|g' Holy Typo Batman! Problem fixed (updated plugin files on github). Quote Link to comment
JimPhreak Posted September 1, 2015 Share Posted September 1, 2015 Seeing the following messages in my console. Not showing up in my log accessed through the webGUI. Quote Link to comment
KentBrockman Posted September 2, 2015 Share Posted September 2, 2015 I just upgraded to 6.1 from 6.0.1 and it all seemed to go just fine. I just have one strange problem with some of my dockers. The version column is shown as "Not Available", but they all seems to be working just fine. Any idea what this could be? Quote Link to comment
KeeWay Posted September 2, 2015 Share Posted September 2, 2015 I just upgraded to v6.1 and it all seemed to work fine but now i can't seem to see my disks browsing from the network any longer. i used to be able to see the disks as shares and i could work with the actual files on those disks but now they are not visible. Is there a setting that i need to turn on to see them again? Thanks James Quote Link to comment
trurl Posted September 2, 2015 Share Posted September 2, 2015 I just upgraded to v6.1 and it all seemed to work fine but now i can't seem to see my disks browsing from the network any longer. i used to be able to see the disks as shares and i could work with the actual files on those disks but now they are not visible. Is there a setting that i need to turn on to see them again? Thanks James See the release notes in the first post of this thread about Enable Disk Shares. Quote Link to comment
Vocatus Posted September 2, 2015 Share Posted September 2, 2015 Hi, I'm running 5.0.5 x86; is it possible to upgrade directly to v6.1 x64? (CPU is 64-bit) Thanks Quote Link to comment
BRiT Posted September 2, 2015 Share Posted September 2, 2015 Hi, I'm running 5.0.5 x86; is it possible to upgrade directly to v6.1 x64? (CPU is 64-bit) Thanks Yes, but only after you remove any and all plugins from v5. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.