September 23, 201510 yr Hi, Running 6.1.3 3 Plug Ins No KVM Everyday I loose web access, cant telnet and no console. Requires hard unclean cycle to recover. Working from home today so I left the syslog open via dynamix on browser window. (see pastebin link) http://pastebin.com/wAWN4Xh9 Whats also curious is that I left PLEX running in a seperate browser tab and can watch content. However cant reach server via telnet or web browser. Crashes happen daily. Not liking that. -Jason
September 24, 201510 yr If you boot into safe mode, does this problem occur? Need to narrow down if this is the result of a plugin or not.
September 24, 201510 yr Author I will boot into safe mode later and check. I cant reach the web GUI but I can open a telnet session. I just checked and I can reach the plug ins by web going to their port. Ie Plex 192.168.2.47:32400 same with sickbeard at 8081 and sabnzbd at 8080. However I am not able to reach 192.168.2.47/Main
September 24, 201510 yr I will boot into safe mode later and check. I cant reach the web GUI but I can open a telnet session. I just checked and I can reach the plug ins by web going to their port. Ie Plex 192.168.2.47:32400 same with sickbeard at 8081 and sabnzbd at 8080. However I am not able to reach 192.168.2.47/Main If you can run a telnet session, then when the problem next occurs you can try using the 'diagnostics' command from the telnet session. This will create a ZIP file in the logs folder on the USB drive which you can post here to see if anyone can spot an issue.
September 24, 201510 yr Author Talk about timing. It all just went down. I went to the telnet session but it had the hash/ pound # char and I couldnt enter command. Grrrr.
September 24, 201510 yr Author okay I am running without plug ins will have the sys log open. thanks!
September 25, 201510 yr Author Here is what happened: Sep 24 18:58:21 Tower kernel: traps: emhttp[1437] general protection ip:2b590d899312 sp:7ffce542caf8 error:0 in ld-2.17.so[2b590d880000+23000] I still have telnet access so ran diagnostics. WebGUI is not available. Only running Plex via plug in and it is accessible.
September 25, 201510 yr Here is what happened: Sep 24 18:58:21 Tower kernel: traps: emhttp[1437] general protection ip:2b590d899312 sp:7ffce542caf8 error:0 in ld-2.17.so[2b590d880000+23000] I still have telnet access so ran diagnostics. WebGUI is not available. Only running Plex via plug in and it is accessible. I thought you were in safe mode? Safe mode should disable all plugins from the system.
September 25, 201510 yr Author I was curious to see if I could run with just Plex. Currently in safe mode at the moment for past 10 minutes or so. Will let you know how it goes. Thanks again.
September 25, 201510 yr Author Safe mode results: Sys log, http://pastebin.com/utSeym9D I've attached the diagnostics file which I ran after the kernel fault. tower-diagnostics-20150925-0804.zip
September 26, 201510 yr Author ok so after the safe mode kernel issue i rebooted into safe mode but this time i unplugged the ethernet cable and went to safe mode. Its been stable for a few hours now. Could it be the realtek chipset?
Archived
This topic is now archived and is closed to further replies.