sneakybifta Posted October 4, 2018 Share Posted October 4, 2018 On 5/15/2018 at 5:08 PM, cferrero said: What I could find, the issue with bandwidth limits is caused by a bugged libtorrent library (v 1.1.5). Linuxserver.io rebased the image to Alpine Edge that pulls that version which doesn't work with Deluge 1.3.15 Here's a how-to using Unraid that makes Deluge stop ignoring the bandwidth limit. Unfortunately, it's based on simply downgrading to an older version rather than any proper fix. Quote Link to comment
DZMM Posted October 14, 2018 Share Posted October 14, 2018 Quick poll - what do you guys have for your Bandwidth settings?I haven't touched the default half-open connections or the max connections attempts per second on my 200/200 line, and I wonder if I should. I use two private trackers IPT and Torrentday Quote Link to comment
5unny Posted November 6, 2018 Share Posted November 6, 2018 I have a strange issue with my Deluge container, initially once it is running it will operate fine but after a period I can't access the webui or restart/stop the container. The only method I've found to get it running again is by rebooting unraid but the same issue will occur after a period of time. No idea what the cause is, used to work fine with no issues but struggling to get past this, any ideas what it could be? Quote Link to comment
JeffreyVrancken Posted November 10, 2018 Share Posted November 10, 2018 On 11/6/2018 at 11:29 AM, 5unny said: I have a strange issue with my Deluge container, initially once it is running it will operate fine but after a period I can't access the webui or restart/stop the container. The only method I've found to get it running again is by rebooting unraid but the same issue will occur after a period of time. No idea what the cause is, used to work fine with no issues but struggling to get past this, any ideas what it could be? Same here! Removing and reinstalling didn’t help either. Quote Link to comment
NNate Posted November 10, 2018 Share Posted November 10, 2018 (edited) Yeah, happening here too. Never had an issue until today. For now I've rolled back to previous release 145 (Go to edit and for repository just put a :145 at the end so it says linuxserver/deluge:145) Working so far, but time will tell Edited November 10, 2018 by NNate 1 Quote Link to comment
captainnapalm Posted November 10, 2018 Share Posted November 10, 2018 Since the most recent update, I can't access the daemon. Tried restarting the container to no avail. Will also be rolling back. Quote Link to comment
AHillman Posted November 10, 2018 Share Posted November 10, 2018 I've been having issues with the docker lately, crashes... I tried to update it and now I cannot open it... Logs indicate: ImportError: Error relocating /usr/lib/python2.7/site-packages/cryptography/hazmat/bindings/_openssl.so: SSL_CTX_set_psk_client_callback: symbol not found Can anyone help me? Quote Link to comment
Max Posted November 10, 2018 Share Posted November 10, 2018 5 hours ago, NNate said: Yeah, happening here too. Never had an issue until today. For now I've rolled back to previous release 145 (Go to edit and for repository just put a :145 at the end so it says linuxserver/deluge:145) Working so far, but time will tell thanks this fixed it for me too. 3 hours ago, AHillman said: I've been having issues with the docker lately, crashes... I tried to update it and now I cannot open it... Logs indicate: ImportError: Error relocating /usr/lib/python2.7/site-packages/cryptography/hazmat/bindings/_openssl.so: SSL_CTX_set_psk_client_callback: symbol not found Can anyone help me? rolling back is the only option for now. Quote Link to comment
EDalcin Posted November 11, 2018 Share Posted November 11, 2018 On 11/10/2018 at 8:07 AM, JeffreyVrancken said: Same here! Removing and reinstalling didn’t help either. Same here. Using transmission instead. But I love Deluge... Quote Link to comment
NNate Posted November 11, 2018 Share Posted November 11, 2018 2 hours ago, EDalcin said: Same here. Using transmission instead. But I love Deluge... Just roll back to the previous release 145. Not a big deal. Quote Link to comment
NatasAZ Posted November 12, 2018 Share Posted November 12, 2018 On 11/11/2018 at 6:43 AM, NNate said: Just roll back to the previous release 145. Not a big deal. Thank you for the tip. Rolling back fixed it for me as well. Quote Link to comment
Brettv Posted November 17, 2018 Share Posted November 17, 2018 anyone have an issue with 145 not saving preferences upon docker restart? Quote Link to comment
5unny Posted December 2, 2018 Share Posted December 2, 2018 Thanks for the tip, I rolled it back but still seem to have an issue where it drops off and I can't get back in without rebooting. Wondering if its an issue related to Unraid. Been through the logs and noticed 2 errors but not sure if they are directly related; Nov 28 17:29:13 Server kernel: CPU: 2 PID: 3756 Comm: deluge-web Not tainted 4.14.26-unRAID #1 and; Server nginx: 2018/12/02 [error] 1878#1878: *693231 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.0.15, server: , request: "POST /plugins/dynamix.docker.manager/include/Events.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock", host: "192.168.0.16", referrer: "http://192.168.0.16/Docker" Quote Link to comment
deuxcolors Posted December 2, 2018 Share Posted December 2, 2018 1 hour ago, 5unny said: Thanks for the tip, I rolled it back but still seem to have an issue where it drops off and I can't get back in without rebooting. Wondering if its an issue related to Unraid. Are you adding or deleting a lot of files, or one very large file? This version of Deluge (possibly others as well) has a flaw that if large or multiple files are being affected the connection to the daemon is lost, and you are left starring at a blank screen. However if you can be patient, once the instructions/actions are completed the the connection is reestablished... It's a pain, but in the case of my workflow it is set up in such a way that I can't (don't want) to mess with it. Quote Link to comment
5unny Posted December 2, 2018 Share Posted December 2, 2018 5 hours ago, deuxcolors said: Are you adding or deleting a lot of files, or one very large file? This version of Deluge (possibly others as well) has a flaw that if large or multiple files are being affected the connection to the daemon is lost, and you are left starring at a blank screen. However if you can be patient, once the instructions/actions are completed the the connection is reestablished... It's a pain, but in the case of my workflow it is set up in such a way that I can't (don't want) to mess with it. Not currently, I can't get it to run for long enough before I get locked out. Is it worth rolling back to an earlier version or a way to run the instruction/actions, it's been around 5 days since the last reboot with the docker running. Would you mind sharing your workflow? Not experienced any issues bar this since running unraid, this one is just annoying! Quote Link to comment
CorneliousJD Posted December 5, 2018 Share Posted December 5, 2018 From the issues last month that had us roll back to :145 - are those still present or have those been fixed? Deluge right now is my only container not at :latest and would like to get it updated again to the latest and greatest if those issues have been fixed. Thanks in advance for anyone that knows! Quote Link to comment
Brettv Posted December 6, 2018 Share Posted December 6, 2018 i tried the latest version yesterday, and had the same issues. So sticking with 145 for now Quote Link to comment
5unny Posted December 6, 2018 Share Posted December 6, 2018 (edited) 145 doesn't seem to work for me still have the same issue Edited December 7, 2018 by 5unny Quote Link to comment
Max Posted December 8, 2018 Share Posted December 8, 2018 On 12/5/2018 at 7:50 PM, CorneliousJD said: From the issues last month that had us roll back to :145 - are those still present or have those been fixed? Deluge right now is my only container not at :latest and would like to get it updated again to the latest and greatest if those issues have been fixed. Thanks in advance for anyone that knows! On 12/6/2018 at 12:43 PM, Brettv said: i tried the latest version yesterday, and had the same issues. So sticking with 145 for now On 12/6/2018 at 9:23 PM, 5unny said: 145 doesn't seem to work for me still have the same issue guys did u guys tried updating it after removing that ":145" part. cause 3 days back i tried it and its been workin great ever since then. yeah at first when i removed that 145 part i was having same issues i was having a month back, but then i tried updating it using force update function, then i got updated to the lastest version ever since then its been working great for me. Quote Link to comment
deuxcolors Posted December 8, 2018 Share Posted December 8, 2018 On 12/2/2018 at 10:53 PM, 5unny said: Not currently, I can't get it to run for long enough before I get locked out. Is it worth rolling back to an earlier version or a way to run the instruction/actions, it's been around 5 days since the last reboot with the docker running. Would you mind sharing your workflow? Not experienced any issues bar this since running unraid, this one is just annoying! Sorry for the late reply. My workflow is nothing special I use Radaar and Sonaar to automatically get me what I want and ship it over to Deluge. I've tried working with other BitTorrent clients and it never plays ball the way I want it to. On the side I have Transmission Torrent when I need really big files that I know will choke up Deluge. On the update side I will remove 145 today and get back to you all with the result. Quote Link to comment
deuxcolors Posted December 8, 2018 Share Posted December 8, 2018 Update Deluge to the latest version. Seems to work fine. Make sure to Force Update it after you remove the :145 Quote Link to comment
LSL1337 Posted December 10, 2018 Share Posted December 10, 2018 I don't auto update Deluge. The auto update and back-up plugin runs, so it stops deluge every week i guess, to make a backup. Last time it reset the webui password back to normal, and radarr/sonarr couldn't connect to deluge anymore. Anyone else had this issue before, that your webui password was changed back to 'deluge'? is there a way I can hardcode this somehow, maybe via a parameter or something? thanks! Quote Link to comment
ccsnet Posted January 20, 2019 Share Posted January 20, 2019 Hi all - I have the docker installed all OK how ever any settings I enter seem to be lost when I restart the docker. I assume it is a config file / access rights issue how ever a quick search did not reveal the answer... can any one assist (apologises if I'm been a numpty and it is on the forum some where). Thanks Terran Quote Link to comment
LSL1337 Posted January 20, 2019 Share Posted January 20, 2019 (edited) hi my docker.img is filling up deluge Size: 280M Logs: 547.0MB in the last weeks, deluge and deluge-web has high cpu usage? any ideas? where can i even find these files I guess it's in the docker.img, cos they are not in the 'mapped' files. I'm not a docker/linux expert (as you can see) thanks! OK: I restarted the docker, and now the log size is 0, but i guess it will grow to this size in 1-2 days. anyone else with similiar issues? Edited January 21, 2019 by LSL1337 Quote Link to comment
trurl Posted January 21, 2019 Share Posted January 21, 2019 2 hours ago, LSL1337 said: my docker.img is filling up Have you read the "Docker Image Filling Up" section in the Docker FAQ: https://forums.unraid.net/topic/57181-real-docker-faq/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.