tron Posted November 10, 2017 Share Posted November 10, 2017 Just wanted to say thanks for making this. Works great with my connection, get the exact results I spected. Quote Link to comment
dmacias Posted November 10, 2017 Author Share Posted November 10, 2017 Just wanted to say thanks for making this. Works great with my connection, get the exact results I spected.Your welcome. What speed is your connection? Quote Link to comment
FreeMan Posted November 14, 2017 Share Posted November 14, 2017 Noticed an interesting artifact... I went into settings and changed "Save speed values as" from bits to bytes. My graph now shows: You'll note the nice jump where Comcast/Xfinity took us down unannounced on Sat night for 6 hours, but, when service resumed, my speed approximately doubled! I can give up 6 hours of access for that... However, on Sunday, I decided to change from bits to bytes and now, my speed looks rather wimpy... Is it possible to save the results in one format (your choice), but display them according the choice I made in settings? In the meantime, I'm reverting back to bits. I appreciate this fine tool (yes, you can see just how crappy my connection was in October), and I'll live with it either way. Thanks! Quote Link to comment
dmacias Posted November 14, 2017 Author Share Posted November 14, 2017 (edited) 37 minutes ago, FreeMan said: Is it possible to save the results in one format (your choice), but display them according the choice I made in settings? That's a good idea. It's possible since the units are saved in the speedtest.xml for each test. I'll update the plugin to show whatever unit is selected in the settings. This will not affect the speedtest image just the graph and table. The image is always in bits. Edited November 14, 2017 by dmacias 1 Quote Link to comment
FreeMan Posted November 17, 2017 Share Posted November 17, 2017 I just noticed that there's a link to what I presume is the standard speedtest.net graphic showing the tested speed. The hover over says "click to show image", but when I click, nothing happens. It doesn't show in the WebGUI page, nor does it open a new tab in Firefox 56.0.2 or 57.0 (both 64-bit). Not so sure I'm thrilled with 57.0, but that's not your responsibility... Quote Link to comment
ljm42 Posted November 17, 2017 Share Posted November 17, 2017 27 minutes ago, FreeMan said: I just noticed that there's a link to what I presume is the standard speedtest.net graphic showing the tested speed. The hover over says "click to show image", but when I click, nothing happens. It doesn't show in the WebGUI page, nor does it open a new tab in Firefox 56.0.2 or 57.0 (both 64-bit). If you turn the charts off you'll see the graphic Quote Link to comment
FreeMan Posted November 17, 2017 Share Posted November 17, 2017 If you turn the charts off you'll see the graphicAh, got it. I'll give that a shot. ThanksSent from Tapatalk Quote Link to comment
FreeMan Posted November 17, 2017 Share Posted November 17, 2017 20 hours ago, ljm42 said: If you turn the charts off you'll see the graphic Hey, whadayaknow, that works! Thanks for the tip. Quote Link to comment
DJRon Posted November 26, 2017 Share Posted November 26, 2017 I noticed some postings a while back about the ability to export; but nothing recently. Is there plans to add an export to csv or even pdf maybe down the road? Quote Link to comment
dmacias Posted November 26, 2017 Author Share Posted November 26, 2017 I noticed some postings a while back about the ability to export; but nothing recently. Is there plans to add an export to csv or even pdf maybe down the road?It's already in xml format on the flash drive in the speedtest plugin config directory. I could put a button on the settings page to download that file. Quote Link to comment
DJRon Posted December 14, 2017 Share Posted December 14, 2017 On 11/26/2017 at 10:59 AM, dmacias said: On 11/26/2017 at 10:29 AM, DJRon said: I noticed some postings a while back about the ability to export; but nothing recently. Is there plans to add an export to csv or even pdf maybe down the road? It's already in xml format on the flash drive in the speedtest plugin config directory. I could put a button on the settings page to download that file. I was looking to get it in a spreadsheet; which I was able to do after getting the algorithm right to translate the LINUX time to a human readable format. Quote Link to comment
tron Posted December 15, 2017 Share Posted December 15, 2017 On 11/10/2017 at 8:43 AM, dmacias said: On 11/10/2017 at 8:35 AM, tron said: Just wanted to say thanks for making this. Works great with my connection, get the exact results I spected. Your welcome. What speed is your connection? I apologize, never saw this comment. I have 50mbit up and down through FIOS. Quote Link to comment
chops Posted January 2, 2018 Share Posted January 2, 2018 OP, I opened an issue on your github at add support of emailing results. Though, after taking another look, I think that may not be the correct place. Let me know if you need me to cancel that and recreate it somewhere else. https://github.com/dmacias72/speedtest/issues/1 Quote Link to comment
dmacias Posted January 2, 2018 Author Share Posted January 2, 2018 48 minutes ago, chops said: OP, I opened an issue on your github at add support of emailing results. Though, after taking another look, I think that may not be the correct place. Let me know if you need me to cancel that and recreate it somewhere else. https://github.com/dmacias72/speedtest/issues/1 That's a repo for a standalone version I created for someone. The plugin is still in my unRAID plugins repo. That repo is mostly dead and I've been creating separate repos for each plugin. So I'll create an unRAID-speedtest repo. But to answer your question I could create an unRAID notification, a toggle for notifications on or off in settings. Then a notification would be sent for each speedtest. It would use the unRAID notification system to relay the results. In the future I could also add different thresholds for warnings. Quote Link to comment
chops Posted January 9, 2018 Share Posted January 9, 2018 That's a repo for a standalone version I created for someone. The plugin is still in my unRAID plugins repo. That repo is mostly dead and I've been creating separate repos for each plugin. So I'll create an unRAID-speedtest repo. But to answer your question I could create an unRAID notification, a toggle for notifications on or off in settings. Then a notification would be sent for each speedtest. It would use the unRAID notification system to relay the results. In the future I could also add different thresholds for warnings.Okay. I didn't think it looked quite right. Keep me posted on that. I'll help with what I can. I think the use of the unraid notification would be the best route for most people. It doesn't really work for what I'm hoping to achieve though. I'll pm you about what I'm trying to do, maybe you can give me some better ideas. Either way, I'm still on board for assisting with the developing an international with the unraid notifications. Sent from my Pixel 2 using Tapatalk Quote Link to comment
dmacias Posted January 13, 2018 Author Share Posted January 13, 2018 I added notifications and alert only notifications. So you can receive a notice for every speedtest or for only speedtest that fall below a certain Mbps or ping. Either one will use the thresholds. I also removed all python 2 packages from the plugin and require NerdPack for python. 1 Quote Link to comment
ljm42 Posted January 14, 2018 Share Posted January 14, 2018 1) I just enabled notifications (with no thresholds) and ran a manual test. For some reason the notification says "FAIL"? Notice [TOWER] - Speedtest Ping [FAIL] <server name> [7.89 km] 41 ms DL: 223.9 Mbps UL: 11.7 Mbps While I'm at it here are a couple of other ideas... 2) Currently the "share" images are loaded via http: http://www.speedtest.net/result/6966318233.png When you are accessing the unRAID webgui via https, this results in a "mixed-content" warning. Would you be open to tweaking the url before loading the image, either making it protocol-relative: //www.speedtest.net/result/6966318233.png or just forcing to https? https://www.speedtest.net/result/6966318233.png 3) Also, since the Speedtest and History tabs are missing from the Scheduler page: /Settings/Scheduler would it be possible to add a link from there back to the tool page? /Tools/SpeedtestTools Without that it is a little difficult to navigate. thanks! Quote Link to comment
dmacias Posted January 15, 2018 Author Share Posted January 15, 2018 3 hours ago, ljm42 said: 1) I just enabled notifications (with no thresholds) and ran a manual test. For some reason the notification says "FAIL"? Notice [TOWER] - Speedtest Ping [FAIL] <server name> [7.89 km] 41 ms DL: 223.9 Mbps UL: 11.7 Mbps While I'm at it here are a couple of other ideas... 2) Currently the "share" images are loaded via http: http://www.speedtest.net/result/6966318233.png When you are accessing the unRAID webgui via https, this results in a "mixed-content" warning. Would you be open to tweaking the url before loading the image, either making it protocol-relative: //www.speedtest.net/result/6966318233.png or just forcing to https? https://www.speedtest.net/result/6966318233.png 3) Also, since the Speedtest and History tabs are missing from the Scheduler page: /Settings/Scheduler would it be possible to add a link from there back to the tool page? /Tools/SpeedtestTools Without that it is a little difficult to navigate. thanks! 1) fixed 2) I just replaced protocol with whatever is in use 3) I'll have to think about that. Adding another tab would be confusing since it's part of the Scheduler page. Maybe a click on the tab when it's active to go back. Quote Link to comment
ljm42 Posted January 15, 2018 Share Posted January 15, 2018 49 minutes ago, dmacias said: 1) fixed 2) I just replaced protocol with whatever is in use 3) I'll have to think about that. Adding another tab would be confusing since it's part of the Scheduler page. Maybe a click on the tab when it's active to go back. Thanks, it works great! For #3, I was thinking along the lines of maybe adding a plain link right below the list of tabs? Quote Link to comment
lovswr Posted January 15, 2018 Share Posted January 15, 2018 I really like this utility, but unfortunately when I upgraded from 6.35 to 6.4 it stopped working. It keeps saying that I need Python 2 but of course that was already installed. I even uninstalled NerdPack (which contains python 2.7) & then uninstalled Speedtest - restarted my server & reinstalled both. I still get the below error when I try to run it. Is Speedtest not compatible with server version 6.4? This plugin requires python 2 from the NerdPack plugin https://raw.githubusercontent.com/dmacias72/unRAID-NerdPack/master/plugin/NerdPack.plg Quote Link to comment
dmacias Posted January 15, 2018 Author Share Posted January 15, 2018 I really like this utility, but unfortunately when I upgraded from 6.35 to 6.4 it stopped working. It keeps saying that I need Python 2 but of course that was already installed. I even uninstalled NerdPack (which contains python 2.7) & then uninstalled Speedtest - restarted my server & reinstalled both. I still get the below error when I try to run it. Is Speedtest not compatible with server version 6.4? This plugin requires python 2 from the NerdPack plugin https://raw.githubusercontent.com/dmacias72/unRAID-NerdPack/master/plugin/NerdPack.plgNerdPack doesn't inherently install anything. You have to go to Settings/NerdPack and select the packages you wish installed and click apply. They will be installed immediately and on reboot.I will put that in the pop-up notification also. In the future I plan on allowing plugins to call NerdPack or the repo to install packages like python2. No need to worry about version. Quote Link to comment
Wob76 Posted January 15, 2018 Share Posted January 15, 2018 (edited) Hi, I love the addition of notifications, but I am having problems with it set for Alert Only, it seems to send me both pass and fails. Enable Notifications: Yes Enable Alert Only Notification: Yes Ping Threshold (ms): 0 (I also tried 999) Download Threshold (Mbit/s): 10 Download Threshold (Mbit/s): 5 I have notifications set up for email and pushover, I revice pass messages via email and pop-up But fails are sent via email, pop-up AND pushover too. So it seems the Alert option is only affecting the pushover notification, rather than all notification types. Wob Edited January 15, 2018 by Wob76 Quote Link to comment
dmacias Posted January 15, 2018 Author Share Posted January 15, 2018 Hi, I love the addition of notifications, but I am having problems with it set for Alert Only, it seems to send me both pass and fails. Enable Notifications: Yes Enable Alert Only Notification: Yes Ping Threshold (ms): 0 (I also tried 999) Download Threshold (Mbit/s): 10 Download Threshold (Mbit/s): 5 I have notifications set up for email and pushover, I revice pass messages via email and pop-up But fails are sent via email, pop-up AND pushover too. So it seems the Alert option is only affecting the pushover notification, rather than all notification types. WobSorry for the confusion the Alert is actually a Warning so it follows the warnings settings in Notifications. I initially set it up as alerts but I figured should be more of a warning notification. So I'll change it to read Enable Warning Only Notification: But anyway, it will display the failure(s) in the message next to [Fail]. Either Ping, Download and/or Upload failures. The thresholds for download and upload are for the lower limit. So if you speedtest falls below 10 or 5 you'll get a notification.The ping will notify for anything over the ping you specify. Which one is failing? What are the settings when it failed and what are the results? Quote Link to comment
Wob76 Posted January 15, 2018 Share Posted January 15, 2018 Both the Fail and Pass seem to work according to how I set the Thresholds. But what I actually want is to ONLY see Alert\Warning notifications, I thought selecting "Enable Alert Only Notification" would filter out the Pass notifications, but they still seem to come into my email and pop-ups. Wob Quote Link to comment
dmacias Posted January 16, 2018 Author Share Posted January 16, 2018 3 hours ago, Wob76 said: Both the Fail and Pass seem to work according to how I set the Thresholds. But what I actually want is to ONLY see Alert\Warning notifications, I thought selecting "Enable Alert Only Notification" would filter out the Pass notifications, but they still seem to come into my email and pop-ups. Wob Thanks. I fixed the logic and changed the wording Quote Link to comment
Recommended Posts
Posted by truckerCLOCK,
5 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.