Conson Droppa Posted October 13, 2016 Share Posted October 13, 2016 Upgrade Spigot to latest Minecraft Build (The way I did it for 1.10.2) FYI for users of this Docker I though i would share the way I upgraded one of my McMyAdmin Dockers to Spigot 1.10.2. It may be the long way around or overkill but it worked. There is very little info out there to do this. Even on Spigot and McMyAdmin forums. Maybe a McMyAdmin 3 (Amp) Docker will solve this. But I think Amp is like docker. Not sure, never looked into it. May be redundant to run a framework in a framework. As discussed earlier, McMyAdmin 2 will only self build Vanilla minecraft, no forks. Also, I am not sure how to, or if it is possible to run the BuildTools.jar directly in the unRaid environment. So I did the following to bypass this. BACKUP WOLRD(S)/NETHER/THE END FOLDERS Setup Spigot as if I was going to run the server on my Mac. - Made a Spigot directory on mac - downloaded and ran Buildtools.jar - started serve on mac - accepted EULA.txt file - joined server via Minecraft client in case any files needed to be built. (not sure if needed) - logged off server - stopped server On unRaid - stopped particular McMyAdmin docker running Spigot - navigated to minecraft folder in the AppData/McMyAdmin folder (or whatever you named it) - copied/merged/replaced files and folders which are highlighted in the attached screenshot - renamed file spigot_x.xx.x to spigot.jar as that is what is required. I examined each file and folder minecraft created and uses and I am not sure if I copied too much, too little or just the right ones but it worked great. This allowed me to go from 1.9.2 to 1.10.2. In the future Microsoft/Mojang/Spigot may change file/folder tree architecture which may break this method. Proceed at your own risk and make good backups before attempting. Link to comment
Conson Droppa Posted November 9, 2016 Share Posted November 9, 2016 Can someone shed some light on how to maybe correct this. It is happening to all my instances of McMyAdmin. Log for one of the dockers below. *** Running /etc/my_init.d/20_apt_update.sh... finding fastest mirror Getting list of mirrors...done. Testing latency to mirror(s) Getting list of launchpad URLs...done. Looking up 3 status(es) 1. pubmirrors.dal.corespace.com (current) Latency: 45.53 ms Org: Corespace Status: Up to date Speed: 1 Gbps 2. reflector.westga.edu Latency: 50.18 ms Org: University of West Georgia Status: Up to date Speed: 45 Mbps 3. mirrors.wikimedia.org Latency: 51.00 ms Org: Wikimedia Foundation Status: Up to date Speed: 10 Gbps pubmirrors.dal.corespace.com (current) is the currently used mirror. Skipping file generation We are now refreshing packages from apt repositories, this *may* take a while Ign http://pubmirrors.dal.corespace.com trusty InRelease Get:1 http://pubmirrors.dal.corespace.com trusty-updates InRelease [65.9 kB] Hit http://ppa.launchpad.net trusty InRelease Hit http://ppa.launchpad.net trusty/main amd64 Packages Get:2 http://pubmirrors.dal.corespace.com trusty-security InRelease [65.9 kB] Hit http://pubmirrors.dal.corespace.com trusty Release.gpg Get:3 http://pubmirrors.dal.corespace.com trusty-updates/main Sources [476 kB] Get:4 http://pubmirrors.dal.corespace.com trusty-updates/restricted Sources [5,921 B] Get:5 http://pubmirrors.dal.corespace.com trusty-updates/universe Sources [214 kB] Get:6 http://pubmirrors.dal.corespace.com trusty-updates/multiverse Sources [7,374 B] Get:7 http://pubmirrors.dal.corespace.com trusty-updates/main amd64 Packages [1,139 kB] Get:8 http://pubmirrors.dal.corespace.com trusty-updates/restricted amd64 Packages [20.4 kB] Get:9 http://pubmirrors.dal.corespace.com trusty-updates/universe amd64 Packages [502 kB] Get:10 http://pubmirrors.dal.corespace.com trusty-updates/multiverse amd64 Packages [15.2 kB] Get:11 http://pubmirrors.dal.corespace.com trusty-security/main Sources [153 kB] Get:12 http://pubmirrors.dal.corespace.com trusty-security/restricted Sources [4,621 B] Get:13 http://pubmirrors.dal.corespace.com trusty-security/universe Sources [53.2 kB] Get:14 http://pubmirrors.dal.corespace.com trusty-security/multiverse Sources [3,021 B] Get:15 http://pubmirrors.dal.corespace.com trusty-security/main amd64 Packages [675 kB] Get:16 http://pubmirrors.dal.corespace.com trusty-security/restricted amd64 Packages [17.0 kB] Get:17 http://pubmirrors.dal.corespace.com trusty-security/universe amd64 Packages [185 kB] Get:18 http://pubmirrors.dal.corespace.com trusty-security/multiverse amd64 Packages [4,015 B] Hit http://pubmirrors.dal.corespace.com trusty Release Hit http://pubmirrors.dal.corespace.com trusty/main Sources Hit http://pubmirrors.dal.corespace.com trusty/restricted Sources Hit http://pubmirrors.dal.corespace.com trusty/universe Sources Hit http://pubmirrors.dal.corespace.com trusty/multiverse Sources Hit http://pubmirrors.dal.corespace.com trusty/main amd64 Packages Hit http://pubmirrors.dal.corespace.com trusty/restricted amd64 Packages Hit http://pubmirrors.dal.corespace.com trusty/universe amd64 Packages Hit http://pubmirrors.dal.corespace.com trusty/multiverse amd64 Packages E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. Fetched 3,606 kB in 16s (217 kB/s) E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem. *** /etc/my_init.d/20_apt_update.sh failed with status 100 *** Killing all processes... Link to comment
CHBMB Posted November 9, 2016 Share Posted November 9, 2016 Are these modified using the details you posted above? A fresh pull is working for me. Running in 64-bit mode. Notice : Detecting System... Notice : No virtualized environment detected. Notice : Linux Distribution: Ubuntu Error : You are currently running McMyAdmin as an administrative user. Error : It is strongly advised to run McMyAdmin as a restricted user. Error : Startup will resume in 5 seconds... Notice : Detection complete. Warning : No Minecraft configuration file found (Normal on a first start) Notice : Detected Java runtime version 1.8.0 Notice : Checking for Minecraft Server updates... Notice : Updating Minecraft server... Notice : Downloading latest Minecraft server... Downloading Game Server: 1%Downloading Game Server: 2%Downloading Game Server: 3%Downloading Game Server: 4%Downloading Game Server: 7%Downloading Game Server: 9%Downloading Game Server: 12%Downloading Game Server: 16%Downloading Game Server: 21%Downloading Game Server: 28%Downloading Game Server: 35%Downloading Game Server: 43%Downloading Game Server: 51%Downloading Game Server: 55%Downloading Game Server: 65%Downloading Game Server: 71%Downloading Game Server: 80%Notice : Download complete. Downloading Game Server: 100%Notice : Download successful! Notice : -configonly was specified, terminating. *** Running /etc/my_init.d/999_advanced_script.sh... *** Running /etc/rc.local... *** Booting runit daemon... *** Runit started as PID 480 McMyAdmin Updater - 2.2.0.0 Nov 9 23:33:32 46b79982bdcc syslog-ng[487]: syslog-ng starting up; version='3.5.3' Running in 64-bit mode. Notice : Detecting System... Notice : No virtualized environment detected. Notice : Linux Distribution: Ubuntu Notice : Detection complete. Warning : No Minecraft configuration file found (Normal on a first start) Notice : Detected Java runtime version 1.8.0 Error : McMyAdmin was not shut down properly! Error : To avoid potential data loss, please perform /quit on this console. Error : Startup will resume in 5 seconds... Notice : Starting McMyAdmin Personal v2.7.0.2 Warning : No saved group information was found. Loading Defaults. Notice : Upgraded 4 legacy groups Notice : No saved schedule was found. Loading Defaults. Notice : Checking for updates... Notice : Checking for Minecraft Server updates... Notice : Starting webserver... Notice : McMyAdmin has started and is ready for use. Notice : This is the first time McMyAdmin has been started. Notice : You must complete the first-start wizard via the web interface. Link to comment
Conson Droppa Posted November 10, 2016 Share Posted November 10, 2016 No, 2 are plain instances of vanilla minecraft. Nothing added or taken away. After hitting start on each they go green play button on the docker icon for about 10 seconds then go red stop button. I'll grab and compare the logs of each when I get home and post them. Sent from my iPhone using Tapatalk Link to comment
Soapy Posted February 8, 2017 Share Posted February 8, 2017 Is there a way to /quit or shutdown mcmyadmin properly? It seems like almost every time I shut down the docker, the admin password gets reset and I have to go through the steps to reset it. I assume it's because mcmyadmin doesn't shutdown properly during the docker shutdown. Link to comment
J_Hizzal Posted June 11, 2017 Share Posted June 11, 2017 Pardon my stupidity, but any tips on installing the Dynmap plugin for this docker? I have the plugin in the right spot and have completed a render. Issue is that port 8123 (default port for Dynmap) doesn't accept a request. Router is configured to forward requests to the Unraid IP. Would I need to open the port on Unraid manually? Or forward the requests to the docker port? Or perform some other modification? Link to comment
CHBMB Posted June 11, 2017 Share Posted June 11, 2017 Switch advanced options on the docker edit screen and add an extra port if that's what you need. 1 Link to comment
J_Hizzal Posted June 12, 2017 Share Posted June 12, 2017 Genius! Should have known that option existed. Thanks @CHBMB Link to comment
mrvilla Posted August 14, 2017 Share Posted August 14, 2017 Hi there This docker has stopped working. I can not access the web interface due to it can not access the port 8080 it seems like. "Firefox can't establish a connection to the server at 192.168.0.100:8080." Any ideas on what I can do? I'm am noob in unraid so an detail explanation would be appreciated! Link to comment
Conson Droppa Posted August 23, 2017 Share Posted August 23, 2017 Hi there This docker has stopped working. I can not access the web interface due to it can not access the port 8080 it seems like. "Firefox can't establish a connection to the server at 192.168.0.100:8080." Any ideas on what I can do? I'm am noob in unraid so an detail explanation would be appreciated!My three instances are working fine from ip:8080, ip:8081, and ip:8082. Sent from my iPhone using Tapatalk Link to comment
mrvilla Posted August 23, 2017 Share Posted August 23, 2017 Got this sorted out yesterday. I started to have issues with it due to missing an upgrade i suspect. I could log in, but could not log on to the server from minecraft client. Anyway. My first thought was that maybe there was something wrong with permissions so offcourse i hit the "Set new permissions". It came up with some warnings that I didnt read in detail.......In my head I thougt that setting new permissions would maybe open to much instead of too little. Making a long story short everytning went to hell. Minecraft webui would not open, nextcloud would work and I have more or less just given up on the whole server when CHBMB contacted me and offered some assistance to see if it could be fixed. After a little check and setting new permissions for nextcloud and minecraft everything worked as a charm! What a great community!:D Link to comment
sosdk Posted February 25, 2018 Share Posted February 25, 2018 (edited) Hi I just installed this docker for my son and some friends to play together. Can they play from Android, iOS and XBOX or is it only from PC ? Edited February 25, 2018 by sosdk Link to comment
CHBMB Posted February 25, 2018 Share Posted February 25, 2018 Hi I just installed this docker for my son and some friends to play together. Can they play from Android, iOS and XBOX or is it only from PC ?No idea, none of ls.io use it. Maybe one of the other users here can tell you....Have you tried going to the mcmyadmin site and looking there?Sent from my LG-H815 using Tapatalk Link to comment
sosdk Posted February 25, 2018 Share Posted February 25, 2018 2 hours ago, schford said: only from pc... OK thx....then that is why I cant connect from Android..... Link to comment
JonathanM Posted February 25, 2018 Share Posted February 25, 2018 2 hours ago, sosdk said: OK thx....then that is why I cant connect from Android..... A quick google and I found this... https://www.minecraftforum.net/forums/minecraft-pocket-edition/mcpe-recent-upcoming-pe-updates/2860593-how-do-i-set-up-a-home-server-for-better-together Link to comment
loady Posted May 31, 2018 Share Posted May 31, 2018 Can anyone help my minecraft connected to this server, im not getting any help at mcmyadmin forum/chat as i am a pirate apparently !, yes i am using a hacked minecraft (i think) and do not intend to pay for it untill i can get it working, i have already paid for licences on xbox and switch. My goal is to allow my kids and friends to play together on our local network, not public servers. The server report as being up and running but i cant seem to connect to it, previously i had same issues with minecraftOS docker but that was resolved by setting online mode to FALSE, cant seem to find any such setting in mcmyadmin, i am either getting 'connection was forcibly closed by host' or 'outdated client' messages. Link to comment
mrvilla Posted August 10, 2019 Share Posted August 10, 2019 Hi. Two questions. 1 how to enter existing worlds into the server and 2 how to make server use more ram? Link to comment
Lucanus Posted December 24, 2019 Share Posted December 24, 2019 Hello all, I recently built my unRAID machine and started a minecraft server on the side for a few friends and me. Now, there aren't enough users to justify running the server all the time, so I wanted to have a way to put it in sleep mode. mcmyadmin seemed just right, however I only have an IPv6 Adress I can work with, when accessing from the outside of my network. Accessing the MC server, while it is running, is no problem. However, when the server is sleeping, mcmyadmin only listens on the IPv4 adress and port. Any way to configure this? I already set the IPv6 Minecraft server adress in the properties for mcmyadmin. Link to comment
Lucanus Posted December 24, 2019 Share Posted December 24, 2019 On 8/10/2019 at 7:30 PM, mrvilla said: 1 how to enter existing worlds into the server Just pop in (replace the mcmyadmin install with) an existing minecraft server install into the Minecraft folder, while the docker is not running. Also, rename the server file to minecraft_server.jar On 8/10/2019 at 7:30 PM, mrvilla said: 2 how to make server use more ram Look into the mcmyadmin config file, while the docker is not running. I changed it there. Maybe there is another way in the gui, but that was quickest to find. Link to comment
NewDisplayName Posted March 3, 2020 Share Posted March 3, 2020 (edited) This is around 5 years old and still not propperly working. On a fresh install you get serval errors. e.g. 403 - Access Denied Remote connections are not permitted when using the default password. You can use the -setpass [NEWPASSWORD] argument to change the password on the command line. McMyAdmin Personal - Web Backend v2.7.1.4 The documentation says something like After starting the container, log into the Web UI as the admin user with the password password and change the password. You should also consider serving the admin UI over https. - thats just not possible. I tried now: minecraft/MCMA2_Linux_x86_64 -setpass test But it just starts another copy of the program (im not sure?!) Quote root@29f30017eaf2:/# minecraft/MCMA2_Linux_x86_64 -setpass test McMyAdmin Updater - 2.2.0.0 Running in 64-bit mode. Notice : Detecting System... Notice : No virtualized environment detected. Notice : Linux Distribution: Ubuntu Error : You are currently running McMyAdmin as an administrative user. Error : It is strongly advised to run McMyAdmin as a restricted user. Error : Startup will resume in 5 seconds... Notice : Detection complete. Warning : No Minecraft configuration file found (Normal on a first start) Warning : Unable to detect java version! Java may not be installed or may be outdated. Caution : You are using the default login password! Remote users will not be able to log in. Notice : Checking for Minecraft Server updates... Notice : Updating Minecraft server... Notice : Downloading latest Minecraft server... Noticead: Download complete. Noticead: Download successful! Notice : Starting McMyAdmin Personal v2.7.1.4 Warning : No saved group information was found. Loading Defaults. Notice : Upgraded 4 legacy groups Notice : No saved schedule was found. Loading Defaults. Notice : Checking for updates... Notice : Checking for Minecraft Server updates... Notice : Starting webserver... Error : Port 8080 is already in use by another application. Error : Web server could not start. Type /reset to retry. Notice : McMyAdmin has started and is ready for use. Notice : This is the first time McMyAdmin has been started. Notice : You must complete the first-start wizard via the web interface. So in the end, the docker log tells me to log into webinterface (for first start wizard) and webinterface tells me to setup a password. all in all a big mess!? Anyone has a solution? How do i set a password? Thanks. Edited March 3, 2020 by nuhll Link to comment
CHBMB Posted March 5, 2020 Share Posted March 5, 2020 On 3/3/2020 at 8:49 PM, nuhll said: This is around 5 years old and still not propperly working. On a fresh install you get serval errors. e.g. 403 - Access Denied Remote connections are not permitted when using the default password. You can use the -setpass [NEWPASSWORD] argument to change the password on the command line. McMyAdmin Personal - Web Backend v2.7.1.4 The documentation says something like After starting the container, log into the Web UI as the admin user with the password password and change the password. You should also consider serving the admin UI over https. - thats just not possible. I tried now: minecraft/MCMA2_Linux_x86_64 -setpass test But it just starts another copy of the program (im not sure?!) So in the end, the docker log tells me to log into webinterface (for first start wizard) and webinterface tells me to setup a password. all in all a big mess!? Anyone has a solution? How do i set a password? Thanks. We deprecated this a long time ago. Must have been missed when asking for removal from CA. Although the links do take you to pages where this is stated. @Squid nuke it from orbit please. @trurl Can you lock the thread as well pleasE? Link to comment
Recommended Posts