[Support] Linuxserver.io - Sonarr


Recommended Posts

 

I posted this in the master thread, but anyway we can get support for mp4 automator built in (or maybe a second container)?

 

https://github.com/mdhiggins/sickbeard_mp4_automator/

Please  make a issue on github. And I'll look into it tomorrow.

 

 

Thanks! Issue posted along with this comment:

 

it might make sense to have NZBGet / SABnzbd support this rather than each PVR application. Ultimately I'm looking for a way to automate the remux process to help out my processor and limit transcoding requirements for Plex. Where that lives, I'm not sure I care too much (personally).

 

hi,

 

I was wondering if this was ever integrated in one or the other way?

right now I'm trying to find a docker for it, but till now without much success.

 

since I have not seen anything since my post I decided to look into it myself and came up with the attached script which is installing all dependencies for mp4_automator. currently I'm using it with a local build docker file based on need's sonar dockerfile.

also it still require the manual download of the scripts itself. I'm sure the specialists here could fine tune the script.

anyhow just in case someone is interested in integrate it to the docker.

installmp4.zip

Link to comment

Sniper it's not a docker problem.  It's a config of Sonarr problem.

 

Sent from my LG-H815 using Tapatalk

 

Hi CHBMB

I meant that the problem with my settings in sonarr because config sonarr in docker containers is not same as windows

That the problem i meant

And as i said i did make sure to setup sonarr in the right way and did work the problem with copy to move the files

What you think that i forget or miss ?

Sonarr is easier than headphones to setup and sonarr cant get it right its sad :(

Headphones sent the torrent to deluge and dont move the file of copy it !

So if there a guide it will a lot easier

In docker /downloads means /what you set in docker container setup But that dont work always

 

Whilst people will help with setup issues if we're given enough information to help, we currently have no plans to produce a guide.  We don't have the time or manpower to do so, it's difficult to draw a line sometimes but we will support the implementation of docker to an application, but don't provide support for the app.  Also as you haven't provided any information at all about how you currently have things setup it's impossible to tell you what you're doing wrong. 

 

I have said this before but if people can't be bothered to post more than "it doesn't work" then the result is the volunteers who are trying to help have a lot more work to do to help solve the problem and sniper I've helped you for a long time the other night and in other threads and pointed this out to you a few times.

 

Want help?  Help us to help you!

 

Hi CHBMB,

Thanks for your reply

I did say its a problem on my side

I did said that i cant thank you enough and i will said it again you did clean and setup my unraid

we currently have no plans to produce a guide.  We don't have the time or manpower to do so

About that i agree with you the guide will help people and you guys Who?

It will help people to setup and no need to ask you  guys and help you Dev do work we less time to spend on answer people

I hope you do see it like i did ,you are smart man

 

 

I hope CHBMB and mkeil77 and others help me with that

Here is my Docker setup

https://drive.google.com/file/d/0BwVQ1QEehpJJR0VEdzlTV2Rfc1U/view?usp=drivesdk

 

Here is my Deluge inside settings

https://drive.google.com/file/d/0BwVQ1QEehpJJbTdkRVV3bFdhTjg/view?usp=drivesdk

 

Here is my sabnzbd setup

https://drive.google.com/file/d/0BwVQ1QEehpJJRUJiaHVVNzRiOUU/view?usp=drivesdk

 

Here is my Headphones setup

https://drive.google.com/file/d/0BwVQ1QEehpJJY3VnTHEwYzNFdEU/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJWUNYeEZ1YnJ2MUk/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJZjJ1bGxxTW9CZzA/view?usp=drivesdk

 

Here is my Couch potato setup

https://drive.google.com/file/d/0BwVQ1QEehpJJbm52TzBudndRTXc/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJekpENHQ1emVKOEU/view?usp=drivesdk

 

Here is my Sonarr setup

https://drive.google.com/file/d/0BwVQ1QEehpJJZjM3MG1UMm9xbG8/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJNUdPQXE2N0hacmc/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJUWtmeGRERy03dk0/view?usp=drivesdk

 

 

Link to comment

sniper, I'd start by standardising what you mean by /downloads.

 

For all containers use /mnt/cache/downloads = /downloads

 

It will make it all far more logical and easier to setup.

 

I have to agree with CHBMB, having different downloads spots makes it harder to try to figure out why it not working.

Link to comment

Guys that what i did

I map /downloads >  /mnt/user/downloads/complete/

And in docker containers i did /downloads

I know that in containers if you do /downloads that mean /mnt/user/downloads/complete/

But nothing happen!!

 

Could you please share the docker settings for Sonar, Sabnzbd and deluge from your docker tab in unpaid

Please ensure that all mappings are visible

Link to comment

Guys that what i did

I map /downloads >  /mnt/user/downloads/complete/

And in docker containers i did /downloads

I know that in containers if you do /downloads that mean /mnt/user/downloads/complete/

But nothing happen!!

 

Could you please share the docker settings for Sonar, Sabnzbd and deluge from your docker tab in unpaid

Please ensure that all mappings are visible

 

HI mkeil77

 

https://drive.google.com/file/d/0BwVQ1QEehpJJSW81aWdQTFlxQlk/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJTmNWNkJ1M2tsRDQ/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJTGU2cFpzVkZJN0E/view?usp=drivesdk

 

I hope that what you meant

Link to comment

Guys that what i did

I map /downloads >  /mnt/user/downloads/complete/

And in docker containers i did /downloads

I know that in containers if you do /downloads that mean /mnt/user/downloads/complete/

But nothing happen!!

 

Could you please share the docker settings for Sonar, Sabnzbd and deluge from your docker tab in unpaid

Please ensure that all mappings are visible

 

HI mkeil77

 

https://drive.google.com/file/d/0BwVQ1QEehpJJSW81aWdQTFlxQlk/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJTmNWNkJ1M2tsRDQ/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJTGU2cFpzVkZJN0E/view?usp=drivesdk

 

I hope that what you meant

 

I noticed you have 2 path configured in your SABNZBD, what I can't see in any of your screenshots is the corresponding container path.

could you please send me a screenshot of both PATH configs of your SABNZBD. just click on edit and send me a screenshot of it.

 

Link to comment

 

I hope CHBMB and mkeil77 and others help me with that

Here is my Docker setup

https://drive.google.com/file/d/0BwVQ1QEehpJJR0VEdzlTV2Rfc1U/view?usp=drivesdk

 

Here is my Deluge inside settings

https://drive.google.com/file/d/0BwVQ1QEehpJJbTdkRVV3bFdhTjg/view?usp=drivesdk

 

Here is my sabnzbd setup

https://drive.google.com/file/d/0BwVQ1QEehpJJRUJiaHVVNzRiOUU/view?usp=drivesdk

 

Here is my Headphones setup

https://drive.google.com/file/d/0BwVQ1QEehpJJY3VnTHEwYzNFdEU/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJWUNYeEZ1YnJ2MUk/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJZjJ1bGxxTW9CZzA/view?usp=drivesdk

 

Here is my Couch potato setup

https://drive.google.com/file/d/0BwVQ1QEehpJJbm52TzBudndRTXc/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJekpENHQ1emVKOEU/view?usp=drivesdk

 

Here is my Sonarr setup

https://drive.google.com/file/d/0BwVQ1QEehpJJZjM3MG1UMm9xbG8/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJNUdPQXE2N0hacmc/view?usp=drivesdk

https://drive.google.com/file/d/0BwVQ1QEehpJJUWtmeGRERy03dk0/view?usp=drivesdk

 

 

Sniper, just a word of advise, a bit offtopic from helping you with your setup.

But I would delete this image file above

Here is my Deluge inside settings 
https://drive.google.com/file/d/0BwVQ1QEehpJJbTdkRVV3bFdhTjg/view?usp=drivesdk

 

If you value privacy then it may not be a good idea to show a screen shot of the things you are downloading with deluge.

 

Link to comment
  • 3 weeks later...

Is it possible to run mono with the debug switch in this container?

 

I am having an issue with sonarr and the devs on their forum say the stack trace logs are pretty much useless without mono in debug mode.

 

EDIT: In fact while I am here I may as well ask the community about my issue as well. I am having issues with certain shows/episodes/possibly NZBs being added to NZBGet from Sonarr while others work with no issue.

I have made no changes to either my Sonarr or NZBGet setup in weeks and this issue just started happening yesterday afternoon.I have verified that Sonarr can connect to NZBGet by using the "test" button in the download client page of the Sonarr settings. I restarted UnRAID as well on the off chance that something was hung up in the system.

 

Here is a pastebin of my sonarr log from yesterday: http://pastebin.com/xyJN8jnQ

and here is a link to my thread over on the sonarr forums if it helps at all: https://forums.sonarr.tv/t/request-failed-failed-to-add-nzb/11596

 

The error message that stands out to me and would explain why the NZB fails to add is: [v2.0.0.4230] System.IO.IOException:

"Error writing request ---> System.Net.Sockets.SocketException: The socket has been shut down"

 

But if the connection between Sonarr and NZBGet was closed then why do other shows and even other episodes from the same show work fine?

Link to comment

Is it possible to run mono with the debug switch in this container?

 

I am having an issue with sonarr and the devs on their forum say the stack trace logs are pretty much useless without mono in debug mode.

 

EDIT: In fact while I am here I may as well ask the community about my issue as well. I am having issues with certain shows/episodes/possibly NZBs being added to NZBGet from Sonarr while others work with no issue.

I have made no changes to either my Sonarr or NZBGet setup in weeks and this issue just started happening yesterday afternoon.I have verified that Sonarr can connect to NZBGet by using the "test" button in the download client page of the Sonarr settings. I restarted UnRAID as well on the off chance that something was hung up in the system.

 

Here is a pastebin of my sonarr log from yesterday: http://pastebin.com/xyJN8jnQ

and here is a link to my thread over on the sonarr forums if it helps at all: https://forums.sonarr.tv/t/request-failed-failed-to-add-nzb/11596

 

The error message that stands out to me and would explain why the NZB fails to add is: [v2.0.0.4230] System.IO.IOException:

"Error writing request ---> System.Net.Sockets.SocketException: The socket has been shut down"

 

But if the connection between Sonarr and NZBGet was closed then why do other shows and even other episodes from the same show work fine?

 

to modify the startup settings for sonarr , exec into the container

docker exec -it <container-name> bash

 

and modify the file

 

/etc/service/sonarr/run

 

exit out and restart the container

 

docker restart <container-name>

Link to comment

Is it possible to run mono with the debug switch in this container?

 

I am having an issue with sonarr and the devs on their forum say the stack trace logs are pretty much useless without mono in debug mode.

 

EDIT: In fact while I am here I may as well ask the community about my issue as well. I am having issues with certain shows/episodes/possibly NZBs being added to NZBGet from Sonarr while others work with no issue.

I have made no changes to either my Sonarr or NZBGet setup in weeks and this issue just started happening yesterday afternoon.I have verified that Sonarr can connect to NZBGet by using the "test" button in the download client page of the Sonarr settings. I restarted UnRAID as well on the off chance that something was hung up in the system.

 

Here is a pastebin of my sonarr log from yesterday: http://pastebin.com/xyJN8jnQ

and here is a link to my thread over on the sonarr forums if it helps at all: https://forums.sonarr.tv/t/request-failed-failed-to-add-nzb/11596

 

The error message that stands out to me and would explain why the NZB fails to add is: [v2.0.0.4230] System.IO.IOException:

"Error writing request ---> System.Net.Sockets.SocketException: The socket has been shut down"

 

But if the connection between Sonarr and NZBGet was closed then why do other shows and even other episodes from the same show work fine?

 

to modify the startup settings for sonarr , exec into the container

docker exec -it <container-name> bash

 

and modify the file

 

/etc/service/sonarr/run

Ok, I am completely new to messing around with mono and editing stuff in Docker containers so bear with me.

This is what is in the run file: XDG_CONFIG_HOME="/config/xdg" exec /sbin/setuser abc mono /opt/NzbDrone/NzbDrone.exe -nobrowser -data=/config

 

so would I just append the debug switch here?

XDG_CONFIG_HOME="/config/xdg" exec /sbin/setuser abc mono --debug /opt/NzbDrone/NzbDrone.exe -nobrowser -data=/config

 

Or just put it at the end of the line?

XDG_CONFIG_HOME="/config/xdg" exec /sbin/setuser abc mono /opt/NzbDrone/NzbDrone.exe -nobrowser -data=/config --debug

Link to comment
  • 2 weeks later...

New sonarr user here, been using sick beard for years but having issues hence the change. In sick beard my shows point to /mnt/user/download/TV when I try to add this path in sonarr to import my shows, it tells me its an invalid path? Looking for help on how to import my shows into sonarr as I have about 100 of them.

 

Thanks

 

AM

Link to comment

New sonarr user here, been using sick beard for years but having issues hence the change. In sick beard my shows point to /mnt/user/download/TV when I try to add this path in sonarr to import my shows, it tells me its an invalid path? Looking for help on how to import my shows into sonarr as I have about 100 of them.

 

Thanks

 

AM

 

Same as your other containers that you've setup /mnt/user/.... doesn't exist within the container.

 

Post your mappings that you've created so far.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.