Jump to content

Got my Equipment, need some help


Autohaul58

Recommended Posts

Posted

Parts List:

Case = Norco 4020

MB = Supermicro X10SAE-O

CPU = Xeon E3-1241v3

RAM = Crucial 2 8GB CT2KIT102472BD160B

(2) Crucial MX200 SSD 500GB

 

Started putting the MB into the case. Following PIN diagram for the front Panel control. Diagram shows 8 pairs of PINS, the MB has 10 sets of PINS. I see on the MB the PINs go from 1 - 20. Pics attached of MB, diagram and connector Leads. My case has connectors for: Power SW, Reset, Power LED+, Power LED-, HDD, NIC1, NIC2, NIC3 and Alarm(8 PIN leads) So which 8 of the 10 on the MB do I use? Having trouble attaching pics, will keep trying.

20151031_151005.jpg.4c178f3001f55d964d22a65a5e4627c9.jpg

20151031_151448.jpg.22d2f0597345d5c56007cfba6b3dd8c6.jpg

Posted

If you look at the manual, and the pictures that you posted, you'll see that the pic with the 20 pins is the trusted platform module header, and the connectors don't go there.

 

According to the manual, they go onto JF1

Posted

Wow, call me Mr. Obvious!  Thanks! Gotta remember the golden rule when working on PC's.....................Never after a 12hr shift with grand kids wanting to help while trying to get ready for a Halloween Party and trick 'r treating................where's my Rum and Coke........................THANKS. I'm sure I will have more questions as this is my first UnRAID build.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...