Slimer Posted November 11, 2015 Share Posted November 11, 2015 I finally made the move to 6+ and life is good. I want to move my existing RFS disks to XFS, so I added a couple of disks outside of the array and pre-cleared them with the UDEV plugin. But the option to format these disks is grayed out in the Plugin If I look at the details for the disk the partition format dropdown is not there. So what am I missing? Thx Quote Link to comment
gfjardim Posted November 11, 2015 Share Posted November 11, 2015 I finally made the move to 6+ and life is good. I want to move my existing RFS disks to XFS, so I added a couple of disks outside of the array and pre-cleared them with the UDEV plugin. But the option to format these disks is grayed out in the Plugin If I look at the details for the disk the partition format dropdown is not there. So what am I missing? Thx If you want to add a disk to the array, you must format it using unRAID's own option. Quote Link to comment
Slimer Posted November 12, 2015 Author Share Posted November 12, 2015 The plan is to format it outside of the array as XFS, move the files from the RFS disks to it (with verify) and then rebuild the array. Quote Link to comment
trurl Posted November 12, 2015 Share Posted November 12, 2015 The plan is to format it outside of the array as XFS, move the files from the RFS disks to it (with verify) and then rebuild the array. By "rebuild the array" do you mean you intend to New Config with the XFS disk as part of the array? That is the point of gfjardim's reply. unRAID must partition and format the disk if it is to be part of the array. Might as well make it part of the array, do the move, and then New Config if you want to remove or rearrange any disks after moving the files. Quote Link to comment
deadsoulz Posted November 13, 2015 Share Posted November 13, 2015 I think he wants a mounted XFS drive out of the array for something like video camera recording etc....so he doesn't have to wear his Parity drive out. I accomplished this using Unassigned Drive Plugin. But I still had to go in command line and create the partition via parted before it would let me format it in the plugin. Quote Link to comment
gfjardim Posted November 13, 2015 Share Posted November 13, 2015 I think he wants a mounted XFS drive out of the array for something like video camera recording etc....so he doesn't have to wear his Parity drive out. I accomplished this using Unassigned Drive Plugin. But I still had to go in command line and create the partition via parted before it would let me format it in the plugin. In that case, you must go to Settings > Unassigned Devices > Destructive Mode and set it to Enabled. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.