Njon Posted November 22, 2015 Share Posted November 22, 2015 Hi all, I recently updated my system to unraid 6.1.4 and I noticed something strange: the temperature of the drives which are spinning aren't always showing while it can be that a disk not spinning has it's own temperature displayed. You can clearly see this in the screenshot below: I simply erased the thumb drive with unraid os 5 and installed the newer one. I attach also the syslog. ( @ this link https://www.dropbox.com/s/2zgpk4ohuunigze/syslog.txt?dl=1) Thank you syslog.txt Quote Link to comment
itimpi Posted November 22, 2015 Share Posted November 22, 2015 There can be a significant delay in the GUI recognising changes. The default for update frequency is 1800 seconds (30 minutes). The update frequency can be set in settings, but you want to avoid making it to frequent as that can affect performance. Changing the 1800 to something like 180 is a good choice. Quote Link to comment
Njon Posted November 23, 2015 Author Share Posted November 23, 2015 Ok thank you! But this kind of trick wasn't necessary in previous versions of unraid right? If not I never noticed it Quote Link to comment
bonienl Posted November 23, 2015 Share Posted November 23, 2015 Ok thank you! But this kind of trick wasn't necessary in previous versions of unraid right? If not I never noticed it unRAID versions prior to version 6 did not have automatic (real-time) screen updating and it was required to press the Refresh button. In version 6 it is a design decision to update the disk (temperature) readings at a separate and lower interval as the automatic screen updates. This is done to minimize the impact on disk performance. Quote Link to comment
Njon Posted November 24, 2015 Author Share Posted November 24, 2015 Ok thank you! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.