I added a new user through the webui, but I can't use that user to login to webui or through ssh.  Only the original root user works.

 

here's the ssh -vv login details:

[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to koliberek.XXX.info ([173.XXX.114.93]:22000).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Requesting [email protected]
debug1: Entering interactive session.
debug2: callback start
debug2: fd 3 setting TCP_NODELAY
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Sun Nov 22 12:40:13 2015 from 207-38-161-52.c3-XXX-ubr1.XXX.ny.cable.rcn.com
Linux 4.1.13-unRAID.
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0
debug2: channel 0: rcvd eow
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug2: channel 0: rcvd close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
Connection to koliberek.XXX.info closed.
Transferred: sent 3144, received 2156 bytes, in 0.1 seconds
Bytes per second: sent 28634.7, received 19636.2
debug1: Exit status 1

 

Any Ideas?

 

Working as expected.  Users are just for accessing shares.  Root is always used to access the console.

o, i c.

 

any best practices for adding system users for ssh access? or just like any other linux system?

 

o, i c.

 

any best practices for adding system users for ssh access? or just like any other linux system?

Not like any other linux system because the OS is unpacked fresh from the flash drive each boot and anything you do at the command line will not survive a reboot.