kricker Posted October 11, 2009 Share Posted October 11, 2009 Crap, I still can't get the s2ram.bin file. Was it removed already? Quote Link to comment
bblue Posted October 11, 2009 Author Share Posted October 11, 2009 No, it's still there, and I'll keep it there for quite a while. Everything looks ok from here, give it another shot. --Bill Quote Link to comment
kricker Posted October 12, 2009 Share Posted October 12, 2009 No, it's still there, and I'll keep it there for quite a while. Everything looks ok from here, give it another shot. --Bill It worked just now. Thanks! Quote Link to comment
bblue Posted October 14, 2009 Author Share Posted October 14, 2009 There should be no time limit. I've gone weeks in S3 and resumed with no problems. My bet is on the PSU. If you have a spare PSU, I'd swap out the PSU and test it with a different one. Ok, I could try that. This one is a new Corsair 650TX and seems completely stable when the unit is on for days at a time when no suspend is in play. I do have an extra 550TX here, but am not sure it will be sufficient to power up 13 drives. Will give it a shot. Thanks. I put the 550TX in last night, and it did power up with all the drives, no problem. Just took it out of suspend at 21 hours and it came right up as it should. Next will be a longer suspend time to verify. Odd too, the 650TX drew .04 watts during suspend. The smaller 550TX draws .06 watts during suspend. It's been several days now, and after trying a wakeup with as much as 35 hours of suspend, there have been no problems at all. Thanks for that tip, Bubba. Interestingly, I moved the original 650TX supply into a Windows 7 system and it has absolutely no problems resuming after any period of time. Different motherboard (MSI instead of Gigabyte) and different OS, but still... --Bill Quote Link to comment
bubbaQ Posted October 14, 2009 Share Posted October 14, 2009 There are engineering tolerances built into most specs and hardware, and occasionally, they are a little tight, and if you get a mobo that wants POS power a little more than the spec (or the cards plugged into the mobo that get POS power), and a PSU that delivers a little less than the spec, then you can have exactly what you experienced.... particularly if you have some issues with the electrolytic caps. Quote Link to comment
smeehrrr Posted October 19, 2009 Share Posted October 19, 2009 Just pick up libx86-1.1-i486-1.tgz from http://packages.slackware.it in the 12.2 distribution, and install it with installpkg. --Bill Looks like packages.slackware.it is down indefinitely, can anyone share the package? Quote Link to comment
Joe L. Posted October 19, 2009 Share Posted October 19, 2009 Just pick up libx86-1.1-i486-1.tgz from http://packages.slackware.it in the 12.2 distribution, and install it with installpkg. --Bill Looks like packages.slackware.it is down indefinitely, can anyone share the package? You might try http://slackfind.net/en/ Joe L. Quote Link to comment
kricker Posted October 19, 2009 Share Posted October 19, 2009 I placed the s2ram and the libx86-1.1-i486-1.tgz package on mediafire. http://www.mediafire.com/file/nzwtmmz2nuz/s2ram.zip Quote Link to comment
starcat Posted December 12, 2009 Share Posted December 12, 2009 This link doesn't work anymore, anyone can post a recent link for downloading s2ram executable package? Thanks! Quote Link to comment
smeehrrr Posted December 12, 2009 Share Posted December 12, 2009 I just downloaded from that link, so it looks like it's working again. Quote Link to comment
peter_sm Posted December 13, 2009 Share Posted December 13, 2009 This works great, now my monitor and keyboard also wakes up Updated my s3_notHrHdTcpIp.sh with /boot/packages/s2ram -f -p -s Quote Link to comment
Swampy Posted May 31, 2010 Share Posted May 31, 2010 I & my sons unRAID also have an issue of not resuming video after S3. I have tried the links but get an endless loop of ads from the file share site. Any help out there with an easy install? Quote Link to comment
starcat Posted June 3, 2010 Share Posted June 3, 2010 Peter, or someone else, could you post the latest s3_notHrHdTcpIp.sh? Thanks! Quote Link to comment
chanders Posted August 5, 2010 Share Posted August 5, 2010 Peter, or someone else, could you post the latest s3_notHrHdTcpIp.sh? Thanks! Would like to see the latest also! Quote Link to comment
dwoods99 Posted March 7, 2011 Share Posted March 7, 2011 Peter, or someone else, could you post the latest s3_notHrHdTcpIp.sh? Thanks! Anyone with an updated S3 script would be appreciated. As well, none of the links in this thread are valid for pre-compiled s2ram (now using unRAID 4.7) Quote Link to comment
jonlai9 Posted March 11, 2011 Share Posted March 11, 2011 I just started with unRAID and also having problems with video after waking on LAN. My motherboard has the AMD 785G chipset. I went through this thread and am somewhat confused. What is the problem behind this, and how does s2ram solve the issue? I would appreciate if someone can give me some simple instructions on how to use s2ram to fix this. Thanks. Quote Link to comment
lewcass Posted March 11, 2011 Share Posted March 11, 2011 I just started with unRAID and also having problems with video after waking on LAN. My motherboard has the AMD 785G chipset. I went through this thread and am somewhat confused. What is the problem behind this, and how does s2ram solve the issue? I would appreciate if someone can give me some simple instructions on how to use s2ram to fix this. Thanks. Before you mess with s2ram, check your board's BIOS and see if there is an option such as Repost Video on S3 Resume. If there is enable it and it will probably solve your problem. How s2ram works is already covered and explained in this thread about as well as it can be. It is also fully documented here, http://tr.opensuse.org/S2ram, which is the first s2ram hit on Google. Quote Link to comment
jonlai9 Posted March 12, 2011 Share Posted March 12, 2011 I just started with unRAID and also having problems with video after waking on LAN. My motherboard has the AMD 785G chipset. I went through this thread and am somewhat confused. What is the problem behind this, and how does s2ram solve the issue? I would appreciate if someone can give me some simple instructions on how to use s2ram to fix this. Thanks. Before you mess with s2ram, check your board's BIOS and see if there is an option such as Repost Video of S3 Resume. If there is enable it and it will probably solve your problem. How s2ram works is already covered and explained in this thread about as well as it can be. It is also fully documented here, http://tr.opensuse.org/S2ram, which is the first s2ram hit on Google. Confirmed that my BIOS doesn't have anything like that Sorry, I'm a bit of a linux n00b so I want to double check if what I'm reading is okay. So basically, download the s2ram package and put it under /boot/packages/. Where is the package? The link you posted only says it's part of the suspend package. Do I download and put that in /boot/packages? And I read I need libx86-1.1-i486-1.tgz installed using installpkg, but how do I do that? And afterwards, I amend the s3.sh script file (found here http://lime-technology.com/forum/index.php?topic=3657.msg41767#msg41767) by changing echo 3 > /proc/acpi/sleep to /boot/packages/s2ram -f -p -s ...and that is it? Quote Link to comment
lewcass Posted March 12, 2011 Share Posted March 12, 2011 And afterwards, I amend the s3.sh script file (found here http://lime-technology.com/forum/index.php?topic=3657.msg41767#msg41767) by changing echo 3 > /proc/acpi/sleep to /boot/packages/s2ram -f -p -s ...and that is it? The actual necessary parameter arguments for s2ram may be different for your motherboard. The link I posted on the other thread explains how to test s2ram and determine which arguments you need. As to installing, I'd like to help you, but since I'm not using s2ram myself, and would have to research how to do it, with limited free time right now, I hope someone else who is actually using it will step in to give you advice. From dwoods99's post in this thread it sounds as though the link to download the compiled package no longer works. If that is true then maybe someone will re-provide it for you. Otherwise as a Linux noob you may be out of luck. Quote Link to comment
PeterB Posted March 13, 2011 Share Posted March 13, 2011 Okay, I've posted a tarfile on my website, containing: 1) s2ram - the binary file built on Slackware 2) s3_notHrHdTcpIp.txt - the script as I originally downloaded it in July 2010 3) s3.txt - the above file with my modifications This can be downloaded from here Quote Link to comment
jonlai9 Posted March 13, 2011 Share Posted March 13, 2011 Okay, I've posted a tarfile on my website, containing: 1) s2ram - the binary file built on Slackware 2) s3_notHrHdTcpIp.txt - the script as I originally downloaded it in July 2010 3) s3.txt - the above file with my modifications This can be downloaded from here Can you also provide step by step instructions of how one would install this on their unraid box? thanks. Quote Link to comment
PeterB Posted March 14, 2011 Share Posted March 14, 2011 Original guide is in the Wiki, here. The Wiki entry points you to this (rather long) thread, where several revisions of the sleep script were posted. Perhaps, if you are able to follow the discussions, you could update the Wiki when you are done? Obviously, if you use my version of the s3 script, you need to place the s2ram binary in the root of your flash drive. Quote Link to comment
badabeezy Posted March 14, 2011 Share Posted March 14, 2011 While I don't need the instructions to install. I have started to go through the process and got everything installed but it is still not working. This is on a new AMD Fusion ASRock E350M1 motherboard. Anybody that has a AMD integrated chipset have any ideas? Also I noticed a new version of suspend was released on the 6th of March and therefore a new version of s2ram is available. While I am not enough of a linux noob that I can't get the s2ram installation to work, I still have no idea how I would go about compiling this new version? Can someone with more experience please compile the new version and post it here? I am sure I am not the only one that would be eternally grateful. Quote Link to comment
jonlai9 Posted March 14, 2011 Share Posted March 14, 2011 Obviously, if you use my version of the s3 script, you need to place the s2ram binary in the root of your flash drive. Can someone with more experience please compile the new version and post it here? I am sure I am not the only one that would be eternally grateful. The problem is I don't know what I have to do with s2ram. Hearing 'install' and 'compile' on a linux system kind of scares me - that tells you how much I know about linux. Dropping files into certain directories or editing script files, on the other hand, is something I can do with confidence. If someone can just get me through the s2ram setup portion then I can just type the line to run it in the s3.sh file and be done with it Thanks. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.