Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Installed License Key, now system wont boot

Featured Replies

OK, I purchased a key, stopped the disks, copied the key across, rebooted and nothing.

 

Dragged out a monitor and keyboard to see what was going on; BIOS was no longer seeing the key or any other USB devices for that matter.

 

Installed a CD to reflash the BIOS, it sees the USB devices again. Booted off the new key and got a boot error. Tried booting without the License and got a Boot Error.

 

Built a new key with Syslinux and the configuration files from the original key, boots OK (no license obviously)

 

Rebuilt the original key, still gets a boot error with or without the license.

 

Does UnRaid do something funky if it doesn't like your key? The key should be OK, but I really can't explain what's happening.

 

Advice required.

 

 

That to me sounds like a faulty flash drive.  It's not something installing your key would have done to it; but if it was "about to fail", saving a file (a write operation) such as the key file may have exploited the pending condition.

 

If it works with a different flash drive without problems, I'd suggest scrapping the defective drive (it's obviously not reliable enough for you to use) and contact Tom for a new key file.

 

Robbie

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.