Hi All,

Hope your well.

 

Sure that others have had a similar issue but haven't found a solution online yet, so a steer would be appreciated. Have seen other posts on here but they are unanswered.

 

When I create a Virtual Machine, the only option I have for Graphics is VNC.

 

In Tools / System devices. I see my graphics card clearly. 

 

I see there is some information on Passthrough, but if UnRaid doesn't see the graphics or sound card assume we need to sort that first.

 

Any advise?

post your PCI Device list and IOMMU group list (Tools>System Devices)

Also, does your machine show in the Info (top right of GUI) that HVM and IOMMU is enabled?

Thanks

 

Certainly..

 

HVM: Enabled

IOMMU: Disabled

 

PCI Devices

 

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge

00:01.0 PCI bridge: Hewlett-Packard Company Device 9602

00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)

00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)

00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)

00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)

00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)

00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)

00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller

00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control

01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10)

IOMMU Groups

 

No IOMMU Groups

USB Devices

 

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 001 Device 002: ID 0951:1665 Kingston Technology Digital DataTraveler SE9 64GB

 

 

Your hardware doesn't support iommu or you didn't activate it in the bios. What hardware do you have?

hey i have the same problem same configurations but i have an r9 270x, i5 4570, asus h87 plus motherboard, i think the cpu should support IOMMU but i cannot manage to find it in the bios..

H87 doesn't support VT-d according to Intel:

 

http://ark.intel.com/products/75004/Intel-H87-Chipset

 

CPU does though.