So i tried restarting the web interface:

killall emhttp
nohup /usr/local/sbin/emhttp &

But to no avail.

 

You can't restart emhttp in V6 like it was possible in V5.

 

And the problem is too generic to conclude that your issue is the same.  Far better to start a new thread and post some diagnostics.

So mine hung up again.

 

Only thing that changed is I had used Makemkv to rip something.

 

Later I tried to watch a movie and everything was hung up. Though diagnostics did run -

 

Only key items listed at that time frame -

eb 12 16:52:04 HPTower kernel: ata12.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen

Feb 12 16:52:04 HPTower kernel: ata12.00: cmd a0/00:00:00:02:00/00:00:00:00:00/a0 tag 6 pio 16388 in

Feb 12 16:52:04 HPTower kernel:        opcode=0x51 51 00 00 00 00 00 00 00 02 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)

Feb 12 16:52:04 HPTower kernel: ata12.00: status: { DRDY }

Feb 12 16:52:04 HPTower kernel: ata12: hard resetting link

Feb 12 16:52:04 HPTower kernel: ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

Feb 12 16:52:04 HPTower kernel: ata12.00: configured for UDMA/100

Feb 12 16:52:04 HPTower kernel: ata12: EH complete

I just upgraded smoothly from 5.0.4 to 6.1.8

Love the new UI!!

 

However, 2 hours after upgrade, I could access the UI.

I came here and found a post about running umount on the drives and then shutdown -r

I did that and the UI came back.

 

Today,..I checked the UI and it's not available.

I tried the umount and shutdown but that's not working today.

All through this, my shares are accessible, I can ssh and telnet in, my memory looks good, top looks fine, and syslog shows not much of anything.

I don't have docker running since I didn't have time to check out the new features.

 

I saw another post where someone converted the drives to XFS.

My only issue is that I can't access the user interface.

 

Sorry, I'm having issues with getting the diagnostics off right now. and I need to run out.

Start your own thread....

I just upgraded smoothly from 5.0.4 to 6.1.8

However, 2 hours after upgrade, I could access the UI.

Start your own thread....

 

Sorry about that, started my own thread.

I may have to check out some of my bios settings since reading this -

https://lime-technology.com/forum/index.php?topic=46808.msg447603#msg447603

 

Mine hasn't crashed recently but I am sure it will soon.